|
US$269.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41041-2021: Control requirements of forbidden and restricted components for space applications
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41041-2021 | English | 269 |
Add to Cart
|
3 days [Need to translate]
|
Control requirements of forbidden and restricted components for space applications
| Valid |
GB/T 41041-2021
|
PDF similar to GB/T 41041-2021
Basic data | Standard ID | GB/T 41041-2021 (GB/T41041-2021) | | Description (Translated English) | Control requirements of forbidden and restricted components for space applications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V25 | | Word Count Estimation | 13,115 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41041-2021: Control requirements of forbidden and restricted components for space applications
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Control requirements of forbidden and restricted components for space applications
ICS 49:060
CCSV25
National Standards of People's Republic of China
Aerospace Prohibited and Restricted Components Control Requirements
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms, Definitions and Abbreviations 1
3:1 Terms and Definitions 1
3:2 Abbreviations 1
4 General Requirements 1
4:1 Basic principles 1
4:2 Components Technical Committee 2
4:3 List of Component Prohibitions and Restrictions 2
5 Detailed requirements 2
5:1 Demand analysis of component development 2
5:2 Design and manufacture 2
5:3 Option 3
5:4 Application Verification 4
5:5 Quality Assurance 4
6 Aerospace Prohibited and Restricted Components List Management 4
6:1 Identification Principle 4
6:2 Identifying the source 4
6:3 Compilation of List of Prohibited and Restricted Components 5
6:4 Review of Prohibited Restricted BOMs 5
6:5 Prohibited Restricted BOM Release 5
6:6 Disable Restricted BOM Update 5
Appendix A (Informative) Example of Aerospace Prohibited and Restricted Components List 6
A:1 General Example 6
A:2 Detailed example 6
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Standardization Technical Committee of Aerospace Technology and Its Application (SAC/TC425):
This document is drafted by: China Academy of Space Technology:
The main drafters of this document: Zhang Wei, Kang He, Zhang Yanwei, Gu Hantian, Su Yu, Zhu Hengjing, Lv Qianqian, Xiao Bo, Yu Lifu, Bo Peng, Chen Yan,
Wang Xu, Jia Xiao, Li Peilei:
Aerospace Prohibited and Restricted Components Control Requirements
1 Scope
This document specifies the requirements analysis, design and manufacture, selection,
Prohibition and restriction control requirements at various stages such as application verification and quality assurance:
This document is applicable to the control of aerospace equipment prohibited and restricted components in the process of aerospace equipment development:
2 Normative references
The contents of the following documents constitute essential provisions of this document by normative reference in the text: Among them, the dated reference documents,
Only the edition corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document
document:
GB/T 29074 Requirements for the identification of aerospace components
3 Terms, Definitions and Abbreviations
3:1 Terms and Definitions
There are no terms and definitions that need to be defined in this document:
3:2 Abbreviations
The following abbreviations apply to this document:
BGA: Ball Grid Array (BalGrideArray)
LCCC: Leadless Ceramic Chip Carrier
PCB: Printed Circuit Board (PrintedCircuitBoard)
SiP: System in Package (SysteminPackage)
TO: Transistor Outline
4 General requirements
4:1 Basic principles
The basic principles of component prohibition and restriction control requirements are as follows:
a) The control requirements for the prohibition and restriction of components shall be implemented in component demand analysis, design and manufacture, selection, evaluation and verification, and quality assurance, etc:
The whole process;
b) The prohibition and restriction requirements are closely related to the specific application environment of the components, and should be combined with the application environment before determining the prohibition and restriction of components
full analysis;
c) After analysis, the components are prohibited, and the control principle should be that the use of aerospace equipment is prohibited;
d) As a restricted component after analysis, the control principle should be within a specific condition or range, after sufficient verification and approval, it can be used:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41041-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 41041-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41041-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41041-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|