Path: Home > GB/T > Page384 > GB/T 40324-2021 || Home > Standard_List > GB/T > Page384 > GB/T 40324-2021 Price & DeliveryUS$629.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40324-2021: Non-destructive testing - Testing method for large diameter round bars by focused ultrasound
Status: Valid
| Std ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status |
| GB/T 40324-2021 | English | 629 |
Add to Cart
|
6 days [Need to translate]
|
Non-destructive testing - Testing method for large diameter round bars by focused ultrasound
| Valid |
Basic data | Standard ID | GB/T 40324-2021 (GB/T40324-2021) | | Description (Translated English) | Non-destructive testing - Testing method for large diameter round bars by focused ultrasound�� | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 34,387 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40324-2021: Non-destructive testing - Testing method for large diameter round bars by focused ultrasound
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing-Testing method for large diameter round bars by focused ultrasound
ICS 19.100
CCSJ04
National Standards of People's Republic of China
Non-destructive testing large-diameter round rod focused ultrasonic testing method
Released on 2021-05-21
2021-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Principles of the method 2
5 General requirements 2
6 Testing procedure 6
7 Acceptance 8
8 Test record and test report 8
Appendix A (informative) Recommended single-element zone focus detection probe parameters 9
Appendix B (informative) Recommended partition inspection plan for different specifications of round bars 11
Appendix C (Informative) Acceptance of Special Titanium Alloy Round Bars (ϕ100mm~ϕ356mm) 16
Appendix D (informative) Recommended round bar comparison test block for ultrasonic zone focus detection 17
Appendix E (informative) Recommended round bar comparison test block for ultrasonic phased array testing 31
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed and managed by the National Standardization Technical Committee for Nondestructive Testing (SAC/TC56).
Drafting organizations of this document. China Aviation Development Beijing Institute of Aeronautical Materials, Shanghai Institute of Materials Research, Matrix Science and Engineering Testing Technology (Beijing) Co., Ltd.
Company, Baoti Group Co., Ltd., Western Superconducting Material Technology Co., Ltd., Fushun Special Steel Co., Ltd., Hunan Jintian Titanium Industry Division
Technology Co., Ltd., Baowu Special Metallurgical Co., Ltd.
The main drafters of this document. Liang Jing, Sha Zhengxiao, Shi Yiwei, Jiang Jiansheng, Huang Yin, Han Lina, Ding Jie, Jiang Yunxi, Ma Xiaohuai, Liu Jingzhou,
Wang Jianguo, Wang Lijuan, Zhong Yuezheng, Jiang Yimin.
Non-destructive testing large-diameter round rod focused ultrasonic testing method
1 Scope
This document specifies the general ultrasonic testing of large-diameter round rod water immersion zone focusing (multiple single-element focusing probes or ultrasonic phased array probes).
Requirements, testing procedures and acceptance, etc.
This document is applicable to special metal round bars (titanium alloys) with a diameter of not less than 100mm and prepared by forging, extrusion, rolling and other forming processes.
Gold, superalloys, etc.) sub-regional focused ultrasonic testing of water immersion.
Note. Special metal round bars mainly refer to higher material quality requirements, so higher detection sensitivity and signal-to-noise ratio are required to achieve the purpose of detecting small defects
Metal round bars. It is mostly used to manufacture certain key components in the aerospace field.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 9445 Non-destructive testing personnel qualification and certification
GB/T 12604.1 Non-destructive testing term Ultrasonic testing
GB/T 20737 Non-destructive testing general terms and definitions
GB/T 36439 Non-destructive testing aviation non-destructive testing personnel qualification and certification
ASTME317 does not use electronic measuring instruments to evaluate the performance characteristics of pulse reflection ultrasonic testing systems (Standard Practicefor
EvaluatingPerformanceCharacteristicsofUltrasonicPulse-EchoTestingInstrumentsandSystems
withouttheUseofElectronicMeasurementInstruments)
ASTME1065 Ultrasonic Probe Performance Evaluation Guide (Standard PracticeforEvaluatingCharacteristicsofUltra-
sonicSearchUnits)
3 Terms and definitions
The following terms and definitions defined in GB/T 12604.1 and GB/T 20737 apply to this document.
3.1
Dynamic depth focusing;DDF
In the ultrasonic phased array detection, the focus rule is controlled so that the sound beam is focused at a fixed depth in the inspected material when it is emitted, and the focus is at the same time when receiving.
Change within a certain depth range.
3.2
Horizontallimit
The maximum readable length of the horizontal scan line determined by the electronic or physical limits displayed by the A-type ultrasonic detector.
3.3
Vertical limit
The maximum readable height of the display signal determined by the electronic or physical limits of the A-type ultrasonic detector.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40324-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40324-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40324-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40324-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |