|
US$839.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40096.6-2024: Technical specification for on-site relay protection equipment - Part 6: Busbar protection
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40096.6-2024 | English | 839 |
Add to Cart
|
6 days [Need to translate]
|
Technical specification for on-site relay protection equipment - Part 6: Busbar protection
| Valid |
GB/T 40096.6-2024
|
PDF similar to GB/T 40096.6-2024
Basic data | Standard ID | GB/T 40096.6-2024 (GB/T40096.6-2024) | | Description (Translated English) | Technical specification for on-site relay protection equipment - Part 6: Busbar protection | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K45 | | Classification of International Standard | 29.240 | | Word Count Estimation | 42,426 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40096.6-2024: Technical specification for on-site relay protection equipment - Part 6: Busbar protection
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:240
CCSK45
National Standards of People's Republic of China
Technical specification for local relay protection device
Part 6: Busbar protection
Part 6: Busbar protection
Released on 2024-04-25
2024-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Technical Requirements 2
4:1 Environmental conditions 2
4:2 Rated electrical parameters 3
4:3 Accuracy and variation 3
4:4 General requirements 3
4:5 Technical principles 5
4:6 Technical requirements 7
4:7 Requirements for related equipment 7
4:8 Power consumption 8
4:9 Overload capacity 8
4:10 Insulation requirements 8
4:11 Moisture and heat resistance 8
4:12 Protective bonding impedance 8
4:13 Mechanical requirements 8
4:14 Electromagnetic compatibility performance 8
4:15 Continuous power on for 10
4:16 Structural and appearance requirements 10
4:17 Enclosure protection 10
4:18 Safety requirements 10
4:19 Dynamic Simulation 10
5 Test methods 11
5:1 Test conditions 11
5:2 Structural and Appearance Inspection 11
5:3 Climate and environmental test 11
5:4 DC power supply impact test 12
5:5 Accuracy and variation checks 12
5:6 Device function and performance test 12
5:7 Dynamic simulation test 12
5:8 Power consumption test 12
5:9 Overload capacity test 12
5:10 Insulation performance test 12
5:11 Moisture and heat resistance test 13
5:12 Protective bonding impedance test 13
5:13 Mechanical properties test 13
5:14 Electromagnetic compatibility performance test 14
5:15 Continuous power-on test 14
5:16 Enclosure protection test 14
5:17 Safety requirements test 14
5:18 Communication interface test 14
6 Inspection rules 14
6:1 Inspection categories 14
6:2 Factory Inspection 14
6:3 Type inspection 15
7 Signs and accompanying documents16
7:1 Sign 16
7:2 Accompanying Documents 16
8 Packaging, transportation and storage 16
8:1 Packaging 16
8:2 Transportation and storage 17
Appendix A (Informative) Information on busbar protection devices for double busbar connection and double busbar double section connection 18
Appendix B (Informative) Information on busbar protection devices for double busbars with single section wiring 24
Appendix C (Normative) Ring network communication of local busbar protection device 26
Appendix D (Informative) Local busbar protection device sub-machine configuration 29
Appendix E (Informative) Dimensions of local busbar protection devices and layout of dedicated connectors 31
Appendix F (Informative) Intermediate node logic of local busbar protection device 32
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document is part 6 of GB/T 40096 "Technical Specification for Local Relay Protection Devices": GB/T 40096 has been published as follows:
Lower part:
--- Part 1: General technical requirements;
--- Part 2: Connectors and prefabricated cables;
--- Part 3: Local operation box;
--- Part 4: Intelligent management unit;
--- Part 5: Line protection;
--- Part 6: Busbar protection;
--- Part 7: Transformer protection:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document is proposed and coordinated by the China Electricity Council:
This document was drafted by: State Grid Corporation of China National Electric Power Dispatching and Control Center, State Grid Zhejiang Electric Power Co:, Ltd:, State Grid Zhejiang
Provincial Electric Power Co:, Ltd: Shaoxing Power Supply Company, Guodian Nanjing Automation Co:, Ltd:, China Electric Power Research Institute Co:, Ltd:, Guangdong Electric Power
State Grid Corporation of China, State Grid Jiangsu Electric Power Co:, Ltd:, State Grid Chongqing Electric Power Co:, Ltd:, State Grid Hunan Electric Power Co:, Ltd:, State Grid
Henan Electric Power Company, State Grid Xinjiang Electric Power Company, State Grid Zhejiang Electric Power Company Electric Power Research Institute, Zhejiang Zheneng Technology Research Institute
Research Institute Co:, Ltd:, State Grid Jiangsu Electric Power Co:, Ltd: Electric Power Research Institute, State Grid Henan Electric Power Co:, Ltd: Electric Power Research Institute, Xuchang
Cape Testing Institute Co:, Ltd:, Nanjing NARI Relay Protection Electric Co:, Ltd:, NARI Technology Co:, Ltd:, Beijing Sifang Relay
Bao Engineering Technology Co:, Ltd:, Xuji Electric Co:, Ltd:, Changyuan Shenrui Jibao Automation Co:, Ltd:, State Grid Zhejiang Electric Power Co:, Ltd:
Huzhou Power Supply Company, State Grid Zhejiang Electric Power Co:, Ltd: Ningbo Power Supply Company, State Grid Zhejiang Electric Power Co:, Ltd: Jiashan County Power Supply Company,
State Grid Zhejiang Electric Power Co:, Ltd: Zhoushan Power Supply Company, University of Electronic Science and Technology of China Yangtze River Delta Research Institute (Huzhou), AVIC Optoelectronics Technology Co:, Ltd:
China Huaneng Group Co:, Ltd:, CNOOC Research Institute Co:, Ltd:, China Energy Engineering Group East China Electric Power Test Institute
Co:, Ltd:, China Energy Engineering Group Zhejiang Electric Power Design Institute Co:, Ltd:
The main drafters of this document are: Qiu Yutao, Chen Guoping, Wang Delin, Xu Kai, Chen Qi, Lv Pengfei, Fang Yudong, Li Kangyi, Ruan Siye, Zhang Xiaoli,
Suo Jianglei, Zhu Junyong, Chen Shuiyao, Yang Xiaofeng, Huang Xiang, Sun Xiaoyong, Huang Yong, Tian Baojiang, Zhang Liangwu, Wu Jiayi, Dou Jingming, Zhan Zhihua, Zhang Fengming,
Ling Gang, Wang Song, Zhang Zebo, Bu Qiangsheng, Han Wei, Yin Qingwei, Chen Fufeng, Wang Fengguang, Dai Wei, Peng Shikuan, Wang Zhiyong, Lu Zhaoyan, Zhao Shousheng, Huang Zhihua,
Shen Hao, Xu Yongming, Yu Wei, Lin Xianqi, Cui Yanlei, Ma Jinhui, Wei Che, Xu Jinbing, Liu Hongbo, and Du Wei:
Introduction
With the improvement of equipment manufacturing level, especially the development of chip technology, local protection devices will be close to the local arrangement or
Integration with primary equipment to improve protection performance: The content and depth of existing technical standards for protection devices based on indoor installation are no longer applicable:
GB/T 40096 is intended to consist of the following parts:
--- Part 1: General technical conditions: The purpose is to standardize the technical requirements, test methods and inspection specifications of local relay protection devices:
and general requirements for marking, packaging, transportation, storage, etc:
--- Part 2: Connectors and prefabricated cables: The purpose is to standardize the product requirements of connectors and prefabricated cables:
--- Part 3: Local operation box: The purpose is to standardize the product requirements of local operation box:
--- Part 4: Intelligent management unit: The purpose is to standardize the product requirements of intelligent management units:
--- Part 5: Line protection: The purpose is to specify the functional specifications and technical requirements of line protection:
--- Part 6: Busbar protection: The purpose is to specify the functional specifications and technical requirements of busbar protection:
--- Part 7: Transformer protection: The purpose is to standardize the functional specifications and technical requirements of transformer protection:
Technical specification for local relay protection device
Part 6: Busbar protection
1 Scope
This document specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and other aspects of the local busbar protection device and its related equipment:
Transport, storage, etc:
This document applies to the research, design, manufacture,
Testing, inspection and application:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 191 Pictorial markings for packaging, storage and transportation
GB/T 2423:17 Environmental testing for electric and electronic products Part 2: Test methods Test Ka: Salt spray
GB/T 2423:22 Environmental testing Part 2: Test method Test N: Temperature change
GB/T 2423:24 Environmental testing Part 2: Test methods Test S: Simulated ground solar radiation and solar radiation test
and weathering test guidelines
GB/T 2887-2011 General Specification for Computer Sites
GB/T 4208-2017 Enclosure protection degree (IP code)
GB/T 4798:1 Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 1: Storage
GB/T 4798:2 Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 2: Transport and handling
GB/T 7261-2016 Basic test methods for relay protection and safety automatic devices
GB/T 11287 Electrical relays Part 21: Vibration, shock, impact and earthquake tests on measuring relays and protection devices
Part 1: Vibration Test (Sine)
GB/T 12357 (all parts) Multimode optical fiber for communication
GB/T 13384 General technical requirements for packaging of electromechanical products
GB/T 14285 Technical specification for relay protection and safety automatic devices
GB/T 14537 Shock and collision tests for measuring relays and protection devices
GB/T 14598:2-2011 Measuring relays and protection devices Part 1: General requirements
GB/T 14598:26-2015 Measuring relays and protection devices Part 26: Electromagnetic compatibility requirements
GB/T 14598:27-2017 Measuring relays and protection devices Part 27: Product safety requirements
GB/T 17626:9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626:10-2017 Electromagnetic compatibility test and measurement technology Damped oscillation magnetic field immunity test
GB/T 17626:18-2016 Electromagnetic compatibility test and measurement technology Damped oscillation wave immunity test
GB/T 26864 Dynamic model test of relay protection products for power systems
GB/T 32890-2016 Relay protection IEC 61850 engineering application model
GB/T 32901-2016 General technical requirements for relay protection of smart substations
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40096.6-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 40096.6-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40096.6-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40096.6-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|