|
US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39748.10-2021: Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39748.10-2021 | English | 184 |
Add to Cart
|
3 days [Need to translate]
|
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
| Valid |
GB/T 39748.10-2021
|
PDF similar to GB/T 39748.10-2021
Basic data | Standard ID | GB/T 39748.10-2021 (GB/T39748.10-2021) | | Description (Translated English) | Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | C45 | | Word Count Estimation | 10,194 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39748.10-2021: Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10.Determination of extractable polymer content by potentiometric titration
ICS 11.180.20
C45
National Standards of People's Republic of China
Urine absorption aids for incontinence
Testing method of polymer matrix absorbent material properties
Part 10.Determination of Potentiometric Titration
Extractable polymer amount
(ISO 17190-10.2001,IDT)
Released on 2021-03-09 Implemented on 2021-03-09
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Test principle 2
5 Reagent 2
6 Test equipment 2
7 Sampling 3
8 Test procedure 3
9 Calculation 3
10 Accuracy 4
11 Inspection report 5
Appendix A (informative appendix) Statistical results of experiments between laboratories 6
Foreword
GB/T 39748 "Test Method for Characteristics of Polymer Matrix Absorbent Materials for Urine Absorption Aids for Incontinence" is divided into the following parts.
---Part 1.Determination of pH;
---Part 2.Determination of residual monomer content;
---Part 3.Determination of particle size distribution by sieving method;
---Part 4.Determination of moisture content by heating weight loss method;
---Part 5.Determine the water absorption rate by weighing method in normal saline;
---Part 6.Gravimetric method to determine the retention rate of normal saline after centrifugation;
---Part 7.Gravimetric method to determine the amount of liquid absorbed under pressure;
---Part 8.Determination of flow by weighing method;
---Part 9.Determination of density by weighing method;
---Part 10.Potentiometric titration method to determine the amount of extractable polymer;
---Part 11.Determination of the amount of respirable particles.
This part is Part 10 of GB/T 39748.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this part is equivalent to the ISO 17190-10.2001 "Characteristics of Polymer Matrix Absorbent Materials for Incontinence Urine Absorption Aids"
Test methods for performance. Part 10.Potentiometric titration method to determine the amount of extractable polymer.
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 10739-2002 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp samples (eqvISO 187.1990);
---GB/T 6682-2008 Analytical laboratory water specifications and test methods (ISO 3696.1987, MOD);
---GB/T 6379.2-2004 Measurement method and accuracy of results (accuracy and precision) Part 2.Determine standard measurement
The basic method of measurement method repeatability and reproducibility (ISO 5725-2.1994, IDT).
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
This part was proposed by the Ministry of Civil Affairs of the People's Republic of China.
This part is under the jurisdiction of the National Standardization Technical Committee for Rehabilitation and Special Equipment for the Disabled (SAC/TC148).
Drafting unit of this section. National Research Center for Rehabilitation Assistive Devices.
The main drafters of this section. Luo Yimin, Yang Xue, Chen Wei.
Introduction
The GB/T 39748 series of test methods were originally formulated by the European Disposable Nonwovens Association, without technical modification, and integrated into ISO 17190
An international standard, issued in 11 parts.
These test methods have been used in practice for many years. According to the general standards (validity and reproducibility, etc.) of the test methods, the reliability has been measured.
It has been proved that it is suitable for sodium polyacrylate superabsorbent materials used in sanitary products, including urine absorption aids used by incontinent persons. These trials
The test method is exclusively used for testing materials, and is not applicable and not applicable to the testing of finished urine absorption aids.
Urine absorption aids for incontinence
Testing method of polymer matrix absorbent material properties
Part 10.Determination of Potentiometric Titration
Extractable polymer amount
1 Scope
This part of GB/T 39748 specifies the carboxylic acid groups of different chain lengths that can be extracted by polyacrylate (PA) super absorbent powder in brine.
Method for measuring mass fraction.
This test method is used for extractable polymer mass fractions ranging from 5.29% to 9.00% (see Appendix A), but it is expected to be suitable for more
A wide range of.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
ISO 187 Standard atmospheric conditions for the treatment and testing of paper, paperboard and pulp samples (Paper, boardandpulps-Standard
atmosphereforconditioningandtestingandprocedureformonitoringtheatmosphereandconditioning
ofsamples)
ISO 3696 Analytical laboratory water characteristics and test methods (Waterforanalyticallaboratoryuse-Specification
andtestmethods)
ISO 5725-2 Measurement methods and accuracy of results (accuracy and precision) Part 2.Determining the repetition of standard measurement methods
The basic method of performance and reproducibility [Accuracy(truenessandprecision)ofmeasurementmethodsandresults-Part
2.Basicmethodforthedeterminationofrepeatabilityandreproducibilityofastandardmeasurement
method]
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Extractables
The sum of the soluble acid and carboxylate groups extracted from the super absorbent powder, where the carboxylate groups can be monomers, oligomers or
polymer.
3.2
Saltgroup
Alkali metal salts of carboxylate groups, also known as neutralizing carboxylates.
3.3
Acidgroup
Carboxylate group.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39748.10-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 39748.10-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39748.10-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39748.10-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|