Path: Home > GB/T > Page384 > GB/T 39744-2021 Home > Standard_List > GB/T > Page384 > GB/T 39744-2021
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39744-2021 | English | 489 |
Add to Cart
|
5 days [Need to translate]
|
General requirements of mechanical product electronic manual based on three-dimensional model
| Valid |
GB/T 39744-2021
|
PDF similar to GB/T 39744-2021
Basic data | Standard ID | GB/T 39744-2021 (GB/T39744-2021) | | Description (Translated English) | General requirements of mechanical product electronic manual based on three-dimensional model | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 26,222 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39744-2021: General requirements of mechanical product electronic manual based on three-dimensional model
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements of mechanical product electronic manual based on three-dimensional model
ICS 01.100.01
J04
National Standards of People's Republic of China
Compilation of electronic manuals for mechanical products based on three-dimensional models
common enquiries
Released on 2021-03-09
2021-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Abbreviations 2
5 Composition 3
6 Basic principles 3
7 Preparation process 3
7.1 Information preparation 3
7.2 Making E-Manual 3
7.3 Electronic manual output document 4
8 General requirements 5
8.1 Form 5
8.2 Content 5
8.3 Compilation 5
8.4 Data 5
8.5 Other 6
9 Detailed requirements 6
9.1 SBOM 6
9.2 DE 6
9.3 DM 9
9.4 E-Manual Template 9
10 Rating 10
10.1 General 10
10.2 Evaluation process 10
10.3 Evaluation Basis 10
10.4 Rating data 11
10.5 Assessment content 11
10.6 Assessment summary processing 11
11 Publishing and Application 11
11.1 Release requirements 11
11.2 Application requirements 12
12 Management 12
12.1 General requirements 12
12.2 Full life cycle management requirements 12
12.3 Data management requirements 13
Appendix A (informative appendix) The data relationship of each stage in the electronic manual 14
Appendix B (informative appendix) SBOM construction process 15
Appendix C (informative appendix) Model construction process 16
Appendix D (informative appendix) DE construction process 17
Appendix E (informative appendix) DM construction process 18
Appendix F (informative appendix) template construction process 19
Appendix G (informative appendix) EBOM to SBOM conversion rules 20
Appendix H (informative appendix) Web page template style 21
References 22
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
This standard was proposed and managed by the National Technical Product Documentation Standardization Technical Committee (SAC/TC146).
Drafting organizations of this standard. Xugong Group Construction Machinery Co., Ltd., China Machinery Productivity Promotion Center, Nanjing Qijun Software Co., Ltd.,
The 38th Research Institute of China Electronics Technology Group Corporation, Beijing Aerospace System Engineering Research Institute, Hangzhou Xindi Digital Engineering System Co., Ltd.,
Beijing Kexinjiyuan Information Technology Co., Ltd.
The main drafters of this standard. Ding Xinxing, Zhao Zhenglong, Shao Xiaodong, Zhang He, Zhang Hongqi, Zhang Xiaolu, Zhao Bo, Peng Wei, Chen Zhiyang, Liu Jing.
Compilation of electronic manuals for mechanical products based on three-dimensional models
common enquiries
1 Scope
This standard specifies the composition, basic principles and flow of electronic manuals for mechanical products based on three-dimensional models (hereinafter referred to as electronic manuals).
Content such as procedures, general requirements, detailed requirements, assessment requirements, release and application requirements, and management requirements.
This standard applies to the compilation of electronic manuals for mechanical products based on three-dimensional models.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 3101-1993 General principles related to quantities, units and symbols
GB/T 19678.1-2018 Compilation composition, content and presentation method of instructions for use Part 1.General rules and detailed requirements
GB/T 21600-2010 General requirements for digital prototypes of mechanical products
GB/T 24734.4-2009 Technical Product Documentation Digital Product Definition Data General Rules Part 4.Design Model Requirements
GB/T 26099.2-2010 General Rules for 3D Modeling of Mechanical Products Part 2.Part Modeling
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Electronicmanual
A document describing product information, the content of which is organized in a structured manner, with a three-dimensional model as the main form of expression, and can be published as electronic
Or paper form, and used to guide the use, repair and maintenance of the product.
3.2
Product lifecycle lifecycle
Including the market demand research phase, product development phase, product design phase, sales phase and after-sales service phase, etc.
Assembly.
[GB/T 18725-2008,3.206]
3.3
Bill of Materials bilofmaterial
In the production process, list the items and quantities of the accessories, parts and materials used in the assembled parts.
[GB/T 18725-2008,3.32]
3.4
Design bill of materials engineeringbilofmaterial
Carry out product design according to customer orders or design requirements, and list the items and numbers of accessories, parts and materials used in the assembled parts
Amount list.
Price & DeliveryUS$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39744-2021: General requirements of mechanical product electronic manual based on three-dimensional model
Status: Valid
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39744-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 39744-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39744-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39744-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |