|
US$344.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39515.2-2021: Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39515.2-2021 | English | 344 |
Add to Cart
|
4 days [Need to translate]
|
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers
| Valid |
GB/T 39515.2-2021
|
PDF similar to GB/T 39515.2-2021
Basic data | Standard ID | GB/T 39515.2-2021 (GB/T39515.2-2021) | | Description (Translated English) | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B91 | | Word Count Estimation | 18,124 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39515.2-2021: Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Agricultural and forestry machinery-Environmental requirements for sprayers-Part 2.Horizontal boom sprayers
ICS 65.060.40
B91
National Standards of People's Republic of China
Environmental requirements for agricultural and forestry machinery sprayers
Part 2.Horizontal boom sprayer
(ISO 16119-2.2013, IDT)
Released on 2021-05-21
2021-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
GB/T 39515 "Environmental Requirements for Agricultural and Forestry Machinery Sprayers" is divided into 4 parts.
---Part 1.General requirements;
---Part 2.Horizontal boom sprayer;
---Part 3.Sprayers for shrubs and trees crops;
---Part 4.Stationary and semi-mobile sprayers.
This part is Part 2 of GB/T 39515.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this part is equivalent to the adoption of ISO 16119-2.2013 Environmental Requirements for Agricultural and Forestry Machinery Sprayers Part 2.Horizontal Spray
Rod sprayer.
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB 10395.6-2006 Agricultural and forestry tractors and machinery safety technical requirements Part 6.Plant protection machinery
(ISO 4254-6.1995,MOD)
---GB/T 10610-2009 Product Geometric Technical Specification (GPS) Surface structure profile method to evaluate the rules and rules of surface structure
Method (ISO 4288.1996, IDT)
---GB/T 18675-2002 Determination of total residual liquid volume of agricultural sprayers for plant protection machinery (idtISO 13440.1996)
---GB/T 18678-2002 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the liquid tank and the diameter of the filling hole
(eqvISO 9357.1990)
---GB/T 20084-2006 Plant protection mechanical sprayer connection thread (ISO 4102.1984, MOD)
---GB/T 20085-2006 Plant Protection Machinery Vocabulary (ISO 5681.1992, MOD)
---GB/T 20183.1-2006 Plant protection machinery spray equipment Part 1.Sprayer nozzle test method
(ISO 5682-1.1996, IDT)
---GB/T 20183.2-2006 Plant protection machinery spray equipment Part 2.Hydraulic sprayer test method
(ISO 5682-2.1997, IDT)
---GB/T 20183.3-2006 Plant protection machinery spray equipment Part 3.Agricultural hydraulic sprayer liquid application per hectare
Regulation system test method (ISO 5682-3.1996, IDT)
---GB/T 24681-2009 Field measurement method for spray drift of plant protection machinery (ISO 22866.2005, IDT)
---GB/T 24684.1-2009 Plant protection machinery evaluation cleaning system test method part 1.sprayer machine
Internal cleaning (ISO 22368-1.2004, IDT)
---GB/T 24684.3-2009 Plant protection machinery evaluation cleaning system test method Part 3.The inside of the chemical tank
Cleaning (ISO 22368-3.2004, IDT)
---GB/T 32241-2015 Laboratory measurement method for spray drift of plant protection machinery Wind tunnel test (ISO 22856.
2008, IDT)
---GB/T 32242.1-2015 Plant protection mechanical inhalation dosing device Part 1.Test method (ISO 21278-1.
2008, MOD)
---GB/T 32242.2-2015 Plant protection mechanical inhalation dosing device Part 2.General requirements and performance limits
(ISO 21278-2.2008,MOD)
This section has made the following editorial changes.
--- Use "MPa" conversion instead of "bar".
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201).
Drafting organizations of this section. Hefei Duojia Agricultural Science and Technology Co., Ltd., Chinese Academy of Agricultural Mechanization Sciences, Shandong Huasheng Agricultural Pharmaceutical Machinery Co., Ltd.
Limited Liability Company, Essen Agricultural Machinery Changzhou Co., Ltd., China Agricultural University, Anhui Zhiquan Agricultural Technology Co., Ltd.
The main drafters of this section. Qin Guangquan, Zhou Haiyan, Guo Fengjiang, Ji Guojun, Yan Herong, He Xiongkui, Gu Yanjun, Yang Xuejun, Jin Chen, Zhang Tie,
Dong Xiang, Cui Jingguo, Chen Junbao.
Introduction
The technical requirements of this part of GB/T 39515 are based on the tests given in ISO 5682-2.1997.This standard is mainly used for hydraulics
Sprayer. For other types of sprayers, other test methods and/or test standards that may be required are this part of GB/T 39515
Subject of future investigation/revision.
This part is a Type C standard specified by ISO 12100.
This section points out the machinery-related hazards, dangerous states, dangerous events and their scope covered.
When the provisions of Type C standards are different from those of Type A or Type B standards as the basis, the provisions of Type C standards take precedence over those of other standards.
It is stipulated that the design and manufacture of machinery and tools shall comply with the provisions of the Class C standard.
Environmental requirements for agricultural and forestry machinery sprayers
Part 2.Horizontal boom sprayer
1 Scope
This part of GB/T 39515 specifies the use of horizontal boom sprayers (see definition in 3.1) (including errors that can be foreseen by the manufacturer).
Use) the technical requirements and verification methods to minimize the potential risk of environmental pollution during the process. This part stipulates the design of various sprayers
Used together with GB/T 39515.1 of general performance requirements. If the requirements specified in this part are not consistent with those specified in GB/T 39515.1
At the same time, sprayers belonging to the scope of this section have priority to follow the provisions of this section. This section does not contain safety aspects, safety aspects
See ISO 4254-6 for requirements.
This section does not apply to sprayers manufactured before the release date.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 24682.2-2015 Drift classification of plant protection mechanical sprayer Part 2.Field measurement of field crop sprayer
Classification (ISO 22369-2.2010, IDT)
GB/T 39515.1-2020 Environmental requirements for agricultural and forestry machinery sprayers Part 1.General requirements (ISO 16119-1.2013,
IDT)
ISO 4102 Plant protection mechanical sprayer connection thread (Equipmentforcropprotection-Sprayers-Con-
nectionthreading)
ISO 4254-6.2009 Safety of Agricultural Machinery Part 6.Sprayers and Liquid Fertilizers (Agriculturalmachinery-
Safety-Part 6.Sprayersandliquidfertilizerdistributors)
ISO 4288 Product Geometric Technical Specification (GPS) Surface Structure Profile Method. Rules and Methods for Evaluating Surface Structure
(GeometricalProductSpecifications(GPS)-Surfacetexture.Profilemethod-Rulesandprocedures
fortheassessmentofsurfacetexture)
ISO 5681 Plant Protection Machinery Vocabulary (Equipmentforcropprotection-Vocabulary)
ISO 5682-1 Plant protection machinery spray equipment Part 1.Sprayer nozzle test method (Equipmentforcrop
protection-Sprayingequipment-Part 1.Testmethodsforsprayernozzles)
ISO 5682-2.1997 Plant protection machinery spray equipment Part 2.Hydraulic sprayer test method (Equipmentfor
cropprotection-Sprayingequipment-Part 2.Testmethodsforhydraulicsprayers)
ISO 5682-3.1996 Plant protection machinery spray equipment-Part 3.Agricultural hydraulic sprayer, liquid application rate adjustment system per hectare
Test method (Equipmentforcropprotection-Sprayingequipment-Part 3.Testmethodforvolume/hec-
tareadjustmentsystemsofagriculturalhydraulicpressuresprayers)
ISO 9357 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the chemical tank and the diameter of the filling hole (Equipmentforcrop
protection-Agriculturalsprayers-Tanknominalvolumeandfilingholediameter)
ISO 13440.1996 Plant protection machinery agricultural sprayer total residual liquid determination (Equipmentforcrop
protection-Agriculturalsprayers-Determinationofthevolumeoftotalresidual)
ISO 21278-1 Plant protection mechanical inhalation dosing device Part 1.Test method (Equipmentforcropprotec-
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39515.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 39515.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39515.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39515.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|