|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39170-2020: Tools for moulding - Centring sleeves
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39170-2020 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Tools for moulding - Centring sleeves
| Valid |
GB/T 39170-2020
|
PDF similar to GB/T 39170-2020
Basic data | Standard ID | GB/T 39170-2020 (GB/T39170-2020) | | Description (Translated English) | Tools for moulding - Centring sleeves | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 10,185 | | Date of Issue | 2020-10-11 | | Date of Implementation | 2021-05-01 | | Regulation (derived from) | National Standard Announcement No. 21 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39170-2020: Tools for moulding - Centring sleeves---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tools for moulding - Centring sleeves
ICS 25.120.30
J46
National Standards of People's Republic of China
Hollow positioning pin for forming mold
2020-10-11 released
2021-05-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafting method to modify and adopt ISO 9449.2007 "Hollow Locating Pins for Forming Moulds".
Compared with ISO 9449.2007, there are technical differences between this standard and the clauses involved in these differences have been passed on the outer margins.
The vertical single line (︱) is marked. The corresponding technical differences and their reasons are as follows.
---In "2 Structure Type and Size", "2.1 Application Example of Hollow Locating Pin" and "Figure 1 Application Example of Hollow Locating Pin" are added
Example", gives an applicable example of hollow positioning pins;
---In "2 Structure Types and Dimensions", "2.3 B type hollow locating pin", "Figure 3 B type hollow locating pin" and "table 2" are added
B-type hollow positioning pin size" is a common type in China;
--- Change "d=25" corresponding to "D1=32" in Table 1 to "d=24", increase the wall thickness, and conform to other specifications in the table;
---In "3 Material and Hardness", change "Material and hardness to be determined by the manufacturer" to "A-type hollow positioning pin recommends GCr15,
The hardness is 45HRC~50HRC; 45 is recommended for type B hollow positioning pins, and the hardness is 42HRC~45HRC", which are commonly used domestic materials.
This standard has made the following editorial changes.
---In "1 scope", change "this standard specifies the dimensions and tolerances of hollow positioning pins for the positioning of the cushion block to the fixed seat plate in the mold"
"This standard specifies the structure, size and tolerance of the hollow positioning pin used for the positioning of the cushion or template in the mold to the fixed seat plate";
---In "1 Scope", "Suitable for hollow positioning pins of forming molds.";
---Delete "Unit is mm" in "1 Scope". In the upper right corner of Figure 2 and Figure 3, add "Dimensions in millimeters";
--- Change "2 size" to "2 structure type and size";
---In Table 1, change the nominal size from the inner diameter d to the outer diameter D1 as the nominal size, and move D1 and its value to
d and its value above;
--- Move the tolerances of l and d in Table 1 to the mark in Figure 2;
--- In Table 1, D1=18 corresponds to l=20, D1=22 corresponds to l=20 and l=25.These three options are not recommended, and brackets are (×);
---Incorporate "Figure 1" and "Table 1" in ISO 9449.2007 into "2 Structural Types and Dimensions" and become "2.2 Type A Hollow Positioning"
The title of the figure "Figure 1 Hollow Locating Pin" is changed to "Figure 2 Type A Hollow Locating Pin"; the table title "Table 1 Hollow Locating Pin"
"Size" is changed to "Table 1 A type hollow locating pin size";
--- In "4 Marks", the mark format is modified according to GB/T 1.1-2009;
---In "4 mark", add the type of "hollow positioning pin" (A or B)";
--- In "4 mark", in order to match Table 1 and Table 2 with the outer diameter as the nominal size, change "d=12mm" to "D1=18mm";
--- In "4 mark", change "l=20mm" to "l=32mm";
--- "References", use "GB/T 131-2006 Product Geometric Technical Specification (GPS) Surface Structure in Technical Product Documents"
The notation of "" replaces "ISO 1302.2002".
This standard was proposed and managed by the National Mold Standardization Technical Committee (SAC/TC33).
Drafting organizations of this standard. Taizhou Huangyan District Quality and Technical Supervision and Inspection Institute (Zhejiang Mould Product Quality Inspection Center), Shenzhen Ji
Yang Intelligent Technology Co., Ltd., Suzhou Feitai Precision Technology Co., Ltd., Zhengzhou University National Engineering Research Center for Rubber and Plastic Moulds, Xiamen Yangmai Electric
Co., Ltd., Hefei University of Technology, Guilin Electrical Appliance Research Institute Co., Ltd., Anhui Jianghuai Automobile Group Co., Ltd., SAIC GM
Wuling Automobile Co., Ltd. Chongqing Branch, Xiamen Jingwei Mould Co., Ltd., Yiwu Guojun Mould Factory, Xi'an Kaiyijin Electronic Technology
Co., Ltd., Xiamen Keli Electronics Co., Ltd., Shaanxi Jinyoubang Technology Co., Ltd., Xiamen Kexin Electronics Co., Ltd., Xiamen Sanxing Electronics
Co., Ltd., Xi'an Ningkangte Data Service Co., Ltd., Xiamen Wanming Electronics Co., Ltd., Xiamen Meike Security Technology Co., Ltd., Xiamen Kun
Jin Electronic Technology Co., Ltd.
The main drafters of this standard. Chen Xiaoping, Huang Chiwei, Chen Wenlin, Dong Binbin, Gu Zuliang, Feng Shuang, Liu Chuntai, Dai Lijuan, Huang Chunsun, Chen Geng,
Zhou Shuang, Yang Rukun, Shang Ying, Lin Liyan, Fu Xiaoqin, Xiang Mei, Li Junxu, Su Shiqiao, Ni Qingqing, Long Xinhua, Pi Kunlin, Huang Jingming, Wu Yuansheng,
Huang Shufu.
Hollow positioning pin for forming mold
1 Scope
This standard specifies the structure type, size, tolerance and marking of the hollow positioning pin used for the positioning of the cushion or template in the mold to the fixed seat plate, and
A description of the material and hardness is given.
This standard applies to hollow positioning pins of forming molds.
2 Structure type and size
2.1 Application example of hollow positioning pin
See Figure 1 for an application example of hollow positioning pins.
2.2 Type A hollow positioning pin
The structure type and size of A-type hollow locating pin should meet the requirements of Figure 2 and Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39170-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39170-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39170-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39170-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|