|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45361-2025: Light industry machinery - Specifications for extrusion die
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45361-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Light industry machinery - Specifications for extrusion die
| Valid |
GB/T 45361-2025
|
PDF similar to GB/T 45361-2025
Basic data | Standard ID | GB/T 45361-2025 (GB/T45361-2025) | | Description (Translated English) | Light industry machinery - Specifications for extrusion die | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 14,183 | | Date of Issue | 2025-02-28 | | Date of Implementation | 2025-09-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45361-2025: Light industry machinery - Specifications for extrusion die---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45361-2025 English version. Light industry machinery - Specifications for extrusion die
ICS 25.120.30
CCSJ46
National Standard of the People's Republic of China
Technical requirements for flat die heads for extrusion of light industrial machinery
Released on 2025-02-28
2025-09-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Structure 2
5 Technical Requirements 3
5.1 General requirements 3
5.2 Materials and accessories 3
5.3 Processing 3
5.4 Parts 4
5.5 Assembly 4
5.6 Electric heating device 5
5.7 Appearance Quality 5
6 Test methods 6
6.1 General requirements 6
6.2 Materials and accessories 6
6.3 Processing 6
6.4 Parts 6
6.5 Assembly 7
6.6 Electric heating device 7
6.7 Appearance Quality 7
7 Inspection Rules 7
7.1 Inspection categories 7
7.2 Factory Inspection 8
7.3 Type inspection 8
7.4 Decision Rules 8
8 Marking, packaging, transportation and storage 8
8.1 Signs 8
8.2 Packaging 9
8.3 Transportation 9
8.4 Storage 9
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by China Light Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Light Industry Machinery (SAC/TC101).
This document was drafted by. Zhejiang Jingcheng Mould Machinery Co., Ltd., Light Industry Hangzhou Mechanical and Electrical Design Institute Co., Ltd., Taizhou Huangyan
District Metrology and Product Quality Safety Testing Institute, Guangdong Shicheng Plastic Machinery Co., Ltd., Fujian Weisheng Machinery Co., Ltd., Zhejiang Hongchang Electric
Technology Co., Ltd., Quanzhou Norda Machinery Co., Ltd., Jiangmen Huilong Plastic Machinery Co., Ltd., and Fujian Shipbuilding and Transportation Vocational College.
The main drafters of this document are. Liang Bin, Lan Chunlin, Jin Liyang, Zhang Chunhua, Li Deshun, Lu Can, Long Xuebing, Shen Jinqiang, Zou Zechang, Shou Xiaodong,
Chen Qiaohua, Gu Shilin, Bai Rujia, Yang Guochang, Fang Quancai, Liang Yanyan, Chen Taili, Dai Huibin, Yang Ting, Lin Meijing, Chen Fupeng, Hu Jinyan.
Technical requirements for flat die heads for extrusion of light industrial machinery
1 Scope
This document defines the terms and definitions related to extrusion flat die heads, and specifies the structure, materials and accessories, processing, parts, assembly, electroplating,
The requirements for thermal devices, appearance quality, inspection rules, marking, packaging, transportation and storage are described, and the corresponding test methods are described.
This document is applicable to the production of plastic products such as films, sheets, plates, etc., with a die lip gap of 0.1mm~100mm for extrusion flat die heads
Production, inspection, sales and acceptance.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 70.1 Hexagon socket head screws
GB/T 191 Pictorial markings for packaging, storage and transportation
GB/T 196 Basic dimensions of common threads
GB/T 197-2018 General thread tolerances
GB/T 230.1 Rockwell hardness test for metallic materials Part 1.Test method
GB/T 825 Eyebolt
GB/T 1184-1996 Shape and position tolerances without tolerance values
GB/T 1299 Tool Steel
GB/T 1804-2000 General tolerances Tolerances of linear and angular dimensions without tolerance indication
GB/T 1958-2017 Product Geometry Specification (GPS) Geometric Tolerance Testing and Verification
GB/T 4169 (all parts) Plastic injection molded parts
GB/T 4340.1 Vickers hardness test for metallic materials Part 1.Test method
GB/T 4956 Measurement of coating thickness of non-magnetic coatings on magnetic substrates - Magnetic method
GB/T 5226.1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical requirements
GB/T 6402 Ultrasonic testing method for steel forgings
GB/T 10610 Geometric Product Specification (GPS) Rules and methods for evaluating surface structure by surface structure profile method
GB/T 13306 Labels
GB/T 13384 General technical requirements for packaging of electromechanical products
GB/T 35840.4 Plastic mould steel Part 4.Pre-hardened steel plate
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Extrusion die head
Flat seam extrusion die head
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 45361-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 45361-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 45361-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45361-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|