|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39082-2020: Test method of vickers hardness testing for resistance spot, projection and seam welds
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39082-2020 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test method of vickers hardness testing for resistance spot, projection and seam welds
| Valid |
GB/T 39082-2020
|
PDF similar to GB/T 39082-2020
Basic data | Standard ID | GB/T 39082-2020 (GB/T39082-2020) | | Description (Translated English) | Test method of vickers hardness testing for resistance spot, projection and seam welds | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J33 | | Classification of International Standard | 25.160.40 | | Word Count Estimation | 10,159 | | Date of Issue | 2020-07-21 | | Date of Implementation | 2021-02-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39082-2020: Test method of vickers hardness testing for resistance spot, projection and seam welds
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of vickers hardness testing for resistance spot, projection and seam welds
ICS 25.160.40
J33
National Standards of People's Republic of China
Vickers hardness of resistance spot welding, projection welding and seam welding joints
experiment method
seamwelds
[ISO 14271.2017,Resistancewelding-Vickershardnesstesting(low-force
2020-07-21 released
2021-02-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafting method to modify and adopt ISO 14271.2017 ``Vickers Hardness of Resistance Spot Welding, Projection Welding and Seam Welding Joints
Degree test (small force value and microhardness)".
Compared with ISO 14271.2017, this standard has many structural adjustments. Appendix A lists this standard and ISO 14271.2017.
A list of changes in the chapter number
Compared with ISO 14271.2017, there are technical differences between this standard and the clauses related to these differences have been passed in the outer margins.
The set vertical single line (|) is marked, and Appendix B gives a list of the corresponding technical differences and their reasons.
This standard has made the following editorial changes.
---Modified the standard name;
---References are deleted.
This standard was proposed and managed by the National Welding Standardization Technical Committee (SAC/TC55).
Drafting organizations of this standard. Chongqing University of Science and Technology, Harbin Welding Research Institute Co., Ltd., Anhui Zhongke Duling Commercial Electric Co., Ltd.
Company, Geely Automobile Research Institute (Ningbo) Co., Ltd., Beijing Aerospace Xinfeng Machinery Equipment Co., Ltd., and Shanghai Materials Research Institute.
The main drafters of this standard. Yao Zongxiang, An Hongliang, Wang Shuai, Yang Haoquan, Yang Guiyong, Su Jinhua, Di He, Li Rui, Wang Bin, Zhai Lanna,
Yin Limeng.
Vickers hardness of resistance spot welding, projection welding and seam welding joints
experiment method
1 Scope
This standard specifies the instruments, specimens, test procedures and test reports for the Vickers hardness test of resistance spot welding, projection welding and seam welding joints.
This standard is applicable to the determination of small force value or micro Vickers hardness of resistance welded joints of metal plates with a thickness of 0.5mm~6.0mm.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 3375 welding terminology
GB/T 4340.1 Vickers hardness test of metallic materials Part 1.Test method (GB/T 4340.1-2009, ISO 6507-1.
2005, MOD)
GB/T 4340.2 Vickers hardness test of metallic materials Part 2.Inspection and calibration of hardness testers (GB/T 4340.2-2012,
ISO 6507-2.2005, MOD)
GB/T 4340.3 Vickers hardness test of metallic materials Part 3.Calibration of standard hardness blocks (GB/T 4340.3-2012,
ISO 6507-3.2005, MOD)
GB/T 4340.4 Vickers hardness test of metallic materials Part 4.Hardness value table (GB/T 4340.4-2009, ISO 6507-4.
2005, IDT)
3 Terms and definitions
The following terms and definitions defined in GB/T 3375 apply to this document.
3.1
Low-forcehardnesstest
Vickers hardness test with a test force of 1.961N≤F≤9.807N.
3.2
Microhardness test
Vickers hardness test with test force F< 1.961N.
Note. There is no clear correlation between the results of the small force Vickers hardness test and the micro Vickers hardness test.
3.3
Vickershardnessvalue
HV
Expressed by the quotient of the test force divided by the permanent hardness indentation surface area.
4 Equipment
The hardness tester should be inspected and calibrated according to GB/T 4340.2, and the standard hardness block should be calibrated according to GB/T 4340.3.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39082-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39082-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39082-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39082-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|