|
US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38851-2020: Information technology--Identification cards--General technical requirements for integrated fingerprint identification card
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38851-2020 | English | 339 |
Add to Cart
|
4 days [Need to translate]
|
Information technology--Identification cards--General technical requirements for integrated fingerprint identification card
| Valid |
GB/T 38851-2020
|
PDF similar to GB/T 38851-2020
Basic data | Standard ID | GB/T 38851-2020 (GB/T38851-2020) | | Description (Translated English) | Information technology--Identification cards--General technical requirements for integrated fingerprint identification card | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L64 | | Classification of International Standard | 35.240.15 | | Word Count Estimation | 18,146 | | Date of Issue | 2020-07-21 | | Date of Implementation | 2021-02-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38851-2020: Information technology--Identification cards--General technical requirements for integrated fingerprint identification card
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology--Identification cards--General technical requirements for integrated fingerprint identification card
ICS 35.240.15
L64
National Standards of People's Republic of China
Information Technology Identification Card
Technical requirements for integrated fingerprint identification cards
2020-07-21 released
2021-02-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Abbreviations 3
5 Basic composition 3
6 Appearance and structure 3
7 Mechanical adaptability 4
7.1 Flexural toughness 4
7.2 Dynamic bending stress 4
7.3 Dynamic torsion stress 4
7.4 Mechanical strength 4
7.5 Scratch resistance 4
8 Environmental adaptability 4
8.1 Limits of restricted substances 4
8.2 Chemical resistance 5
8.3 Card dimensional stability and warpage under temperature and humidity conditions 5
8.4 Light 5
8.5 Peel strength 5
8.6 Adhesion or block 5
8.7 Full card warpage 5
8.8 Heat resistance 5
8.9 Surface distortion 5
8.10 Interaction between pollution and card components 5
8.11 Ultraviolet 5
8.12 X-ray 5
8.13 Static magnetic field 5
8.14 Alternating magnetic field 5
8.15 Static electricity 5
9 Electrical characteristics and transmission protocol 6
10 General process and basic functions, performance requirements 6
10.1 General process 6
10.2 Basic functional requirements 7
10.3 Basic performance requirements 7
11 Command 8
12 Information Security 8
12.1 General requirements 8
12.2 Fingerprint collection and processing security 8
12.3 Fingerprint storage security 9
12.4 Fingerprint comparison security 9
Appendix A (informative appendix) ID-1 specification fingerprint identification card face layout 10
Reference 11
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).
Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
Drafting organizations of this standard. China Electronics Standardization Institute, Chutianlong Co., Ltd., Huada Semiconductor Co., Ltd., Shanghai First
Core Intelligent Technology Co., Ltd., Shenzhen Saixi Information Technology Co., Ltd., Beijing Zhongdian Huada Electronic Design Co., Ltd., Beijing Zhixin Micro
Electronic Technology Co., Ltd., Jinbangda Co., Ltd., Eastcom Peace Technology Co., Ltd., Feitian Chengxin Technology Co., Ltd., Tianjin City
Hongtian Technology Development Co., Ltd., Beijing Eyes Technology Co., Ltd., Beijing Watchdata Co., Ltd., Datang Microelectronics Technology Co., Ltd.
Division, China Power Smart Card Co., Ltd., Ziguang Tongxin Microelectronics Co., Ltd., Logistics Science and Technology Research Institute of the Academy of Military Sciences
Research Institute, Shanghai Fudan Microelectronics Group Co., Ltd., Shanghai Mitte Printing Co., Ltd., China UnionPay Co., Ltd., China Science
Institute of Automation, National Technology Co., Ltd.
The main drafters of this standard. Cao Guoshun, Lan Tian, Jiang Quming, Wang Junfeng, Li Dan, Yu Hui, Fu Qingqin, Xu Muping, Yuan Aiyang, Zhou Xiangtao,
Zhu Pengfei, Bing Zhigang, Song Fangfang, Zhang Shurui, Bai Jing, Yu Hengyi, Zhou Zheng, Wang Jin, Cao Yu, Hu Bo, Qin Chao, Shao Xing, Wu Xingyu, Liu Xiaochen,
Gao Wei, Xu Pingjiang, Cheng Wangchi, Zhang Jianwei, Xu Sufen.
Information Technology Identification Card
Technical requirements for integrated fingerprint identification cards
1 Scope
This standard specifies the basic composition, appearance and structure, and mechanical fitness of fingerprint-integrated identification cards (hereinafter referred to as fingerprint identification cards).
Compliance, environmental adaptability, electrical characteristics and transmission protocols, general procedures and basic functional performance, commands, information security and other requirements.
This standard is applicable to the development, production, inspection and use of fingerprint identification cards.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 14916-2006 Identification card physical characteristics
GB/T 16649.1-2006 Identification Card IC Card with Contacts Part 1.Physical Characteristics
GB/T 16649.2 Identification Card IC Cards with Contacts Part 2.Contact Size and Position
GB/T 16649.3 Identification card IC card with contacts-Part 3.Electrical signal and transmission protocol
GB/T 16649.10 Identification card IC card with contacts-Part 10.Synchronous card electrical signal and response to reset
GB/T 16649.11-2019 Identification Card Integrated Circuit Card Part 11.Identity Verification by Biometric Identification Method
GB/T 17554.1-2006 Identification Card Test Method Part 1.General Characteristic Test
GB/T 17554.3-2006 Identification Card Test Method Part 3.Integrated Circuit Cards with Contacts and Related Interface Equipment
GB/T 26237.1 Information Technology Biometric Data Exchange Format Part 1.Framework
GB/T 26237.2 Information Technology Biometric Data Exchange Format Part 2.Fingerprint Minutiae Data
GB/T 26237.3 Information Technology Biometric Data Exchange Format Part 3.Fingerprint Spectrum Data
GB/T 26237.4 Information Technology Biometric Data Exchange Format Part 4.Fingerprint Image Data
GB/T 26572-2011 Limit requirements for restricted substances in electrical and electronic products
GB/T 26704-2011 pencil
GB/T 33767.1-2017 Information Technology Biometric Sample Quality Part 1.Framework
ISO /IEC 10373-3 Identification Card Test Method Part 3.Integrated Circuit Cards with Contacts and Related Interface Equipment (Iden-
tificationcards-Testmethods-Part 3.Integratedcircuitcardswithcontactsandrelatedinterfacede-
vices)
ISO /IEC 10373-6 Identification card test method Part 6.Proximity card (Identificationcards-Test
methods-Part 6.Proximitycards)
ISO /IEC 10373-7 Identification card test method Part 7.Proximity card (Identificationcards-Test
methods-Part 7.Vicinitycards)
ISO /IEC 14443 (all parts) identification card contactless integrated circuit card close to card type (Identificationcards-
Contactlessintegratedcircuitcards-Proximitycards)
ISO /IEC 30107 (all parts) Information technology biometrics presents attack detection (Informationtechnology-
Biometricpresentationattackdetection)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38851-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38851-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 38851-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38851-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|