|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3734-2008: 24-degree cone connectors -- Male
Status: Valid GB/T 3734: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3734-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
24-degree cone connectors -- Male
| Valid |
GB/T 3734-2008
|
| GB/T 3734.1-1983 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Male connector--Assembly
| Obsolete |
GB/T 3734.1-1983
|
PDF similar to GB/T 3734-2008
Basic data | Standard ID | GB/T 3734-2008 (GB/T3734-2008) | | Description (Translated English) | 24-degree cone connectors -- Male | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J15 | | Classification of International Standard | 21.060.60 | | Word Count Estimation | 6,662 | | Date of Issue | 2008-05-07 | | Date of Implementation | 2008-11-01 | | Older Standard (superseded by this standard) | GB/T 3734.1-1983; GB/T 3734.2-1983 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.7 (Total No.120) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the card sets straight taper threaded pipe joints and fittings body size, marking and technical requirements. This standard applies to pipe outside diameter 4mm ~ 42mm, the maximum working pressure of 10MPa ~ 40MPa hydraulic fluid power and general -purpose pipeline system. | GB/T 3734-2008: 24-degree cone connectors -- Male---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
24-degree cone connectors.Male
ICS 21.060.60
J15
National Standards of People's Republic of China
Replacing GB/T 3734.1-1983, GB/T 3734.2-1983
Sleeve taper straight pipe fittings
2008-05-07 released
2008-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard is one of the standard series of pipe fittings.
This standard is GB/T 3734.1-1983 "ferrule taper straight pipe fittings" and GB/T 3734.2-1983 "Ferrule Cone
Straight through the body connector "amendment. The main changes are as follows.
--- The two standard content were integrated;
--- Modify the English name;
--- 55 ° increase the thread column end seal pipe thread (R) and 60 ° seal pipe thread (NPT), canceled the original standard metric taper thread
(ZM);
--- Nominal pressure E (160) is revised to the maximum working pressure 10MPa ~ 40MPa, and is divided into LL, L and S three series, series
The product size range has been adjusted;
--- Adjust the pipe diameter size series, and modify the relevant size;
--- Reduce some of the parameters should be controlled by the manufacturer;
--- Canceled the weight data;
--- Canceled the surface roughness markings, surface roughness requirements GB/T 3765 "Ferrule fittings technical conditions" are given.
This standard from the date of implementation instead of GB/T 3734.1-1983 and GB/T 3734.2-1983.
This standard is proposed by the China Machinery Industry Federation.
This standard by the National Piping Accessories Standardization Technical Committee.
This standard is drafted by. China Machine Productivity Promotion Center, Haiyan Pipe Manufacturing Co., Ltd., Eaton (Ningbo) limited fluid connections
the company.
Participated in the drafting of this standard. Jiaxing Miesite Pipe Manufacturing Co., Ltd., Jianhu County, the best special hydraulic pipe fittings Co., Ltd., Zhejiang Huaxia valve
Door Co., Ltd., Haiyan Gaobo Tube Co., Ltd., Haiyan Pipe Co., Ltd., Jiaozuo City Road Hydraulic Accessory Co., Ltd.
The main drafters of this standard. Li Weirong, Geng Zhixue, Zhou Shunhua, Li Junying, Tao Zhongming, left Xuejun, Xu Changxiang, Ruan Haofeng, Zhou Jianfei,
Wang Limin, Feng Feng.
This standard replaces the standards previously issued as follows.
--- GB/T 3734.1-1983;
--- GB/T 3734.2-1983.
Sleeve taper straight pipe fittings
1 Scope
This standard specifies the size, marking and technical requirements for the ferrule taper thread straight pipe fittings and fittings body.
This standard applies to pipe diameter 4mm ~ 42mm, the maximum working pressure of 10MPa ~ 40MPa hydraulic fluid transmission and general
Piping system for use.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research
Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.
Connection nuts for bushing type fittings
GB/T 3764-2008 card sets
Specification for pipe ferrule fittings GB/T 3765-2008
3 size
The size of the sleeve taper thread straight pipe joint and joint body shall comply with the provisions in Figure 1, Figure 2 and Table 1, the joint body sleeve end size shall meet
With the provisions of GB/T 3764.
4 mark
4.1 mark method
Catheter taper thread straight pipe fittings and connector body marking method should be consistent with the provisions of GB/T 3765.
4.2 Marking examples
Connector series L, pipe outer diameter of 10mm, 55 ° sealing pipe thread (R), the surface galvanized steel ferrule taper thread straight pipe
Connector marked as.
Fittings GB/T 3734 L10/R1/4
Connector series L, pipe outer diameter of 10mm, 55 ° sealing pipe thread (R), the surface of the zinc-plated steel sleeve taper thread straight through
The head is marked as.
Connector body GB/T 3734 L10/R1/4
5 technical requirements
Technical requirements according to the provisions of GB/T 3765.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3734-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3734-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3734-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3734-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3734-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3734-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|