|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37126-2018: Test method for structural sealant glazing systems (SSGS)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37126-2018 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Test method for structural sealant glazing systems (SSGS)
| Valid |
GB/T 37126-2018
|
PDF similar to GB/T 37126-2018
Basic data | Standard ID | GB/T 37126-2018 (GB/T37126-2018) | | Description (Translated English) | Test method for structural sealant glazing systems (SSGS) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q24 | | Classification of International Standard | 91.100.50 | | Word Count Estimation | 30,360 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37126-2018: Test method for structural sealant glazing systems (SSGS)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for structural sealant glazing systems(SSGS)
ICS 91.100.50
Q24
National Standards of People's Republic of China
Test method for building sealant for structural assembly
Published on.2018-12-28
2019-11-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Standard test conditions 1
5 Preparation and processing of test pieces 1
6 tensile bondability 4
7 Shear performance 7
8 tear resistance 8
9 Tensile adhesion after salt spray treatment 10
10 Tensile adhesion after acid mist treatment 10
11 Tensile adhesion after detergent treatment 11
12 Water-ultraviolet radiation tensile bond 12
13 fatigue performance 12
14 Creep performance under permanent shear 13
15 modulus of elasticity 16
16 Compatibility with adjacent contact materials after UV treatment 17
17 Compatibility with adjacent contact materials in the absence of UV treatment 19
Appendix A (informative) Calculation of the stiffness of building structural adhesives for structural assembly 22
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Building Materials Federation.
This standard is under the jurisdiction of the National Technical Committee for Standardization of Lightweight and Decorative Building Materials (SAC/TC195).
This standard is drafted by. Shanghai Jianke Inspection Co., Ltd., Zhengzhou Zhongyuan Slander High-Tech Co., Ltd.
Participated in the drafting of this standard. Guangzhou Baiyun Chemical Industry Co., Ltd., China Building Materials Inspection and Certification Group Suzhou Co., Ltd., Sika
(China) Co., Ltd., Chengdu Silicon Bao Technology Co., Ltd., Moto (Shanghai) Trading Co., Ltd., Hangzhou Zhijiang Silicone Chemical Co., Ltd.
Division, Dow Corning (China) Investment Co., Ltd., Hubei Huitian New Materials Co., Ltd., Shanghai Oriental Yuhong Waterproof Technology Co., Ltd.,
Hangzhou Foster Applied Materials Co., Ltd., Hubei Tongcheng High-tech Materials Co., Ltd., Guangzhou Gaoshi Industrial Co., Ltd., Shandong Fit
Jiaoye Technology Co., Ltd., Beijing Tianshan New Material Technology Co., Ltd., Liaoning Lushi Chemical (Group) Co., Ltd.
The main drafters of this standard. Han Zhenxiong, Zhang Yanhong, Gao Wei, Niu Rong, Yu Yifan, Gan Luqing, Ma Dongyang, Si Lingang, Yan Bing, Luo Sibin,
Wei Chunyan, Xu Jun, Wang Wenkai, Wang Cuihua, Xiang Hua, Hu Xinyu, Lu Zhengyang, Ding Shengyuan, Xiao Ming, Guo Qing, Shen Yuhua, Pan Zhouyi.
Test method for building sealant for structural assembly
1 Scope
This standard specifies the terms and definitions of structural sealants for structural assembly (hereinafter referred to as "structural adhesives"), standard test conditions, and preparation of test pieces.
And treatment, tensile cohesiveness, shear properties, tear resistance, tensile adhesion after salt spray treatment, tensile adhesion after acid mist treatment, detergent
Post-stretch adhesion, tensile bond after water-ultraviolet irradiation, fatigue properties, creep properties under permanent shear, modulus of elasticity, UV
Test methods for compatibility with adjacent contact materials, compatibility with adjacent contact materials without UV treatment, etc.
This standard applies to building sealants for structural assembly.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber
GB/T 9789 Metal and other inorganic coatings are usually tested for sulfur dioxide corrosion under condensation conditions
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB/T 13477.1 Test methods for building sealing materials - Part 1
GB/T 13477.8-2017 Test methods for building sealing materials - Part 8. Determination of tensile bond
GB/T 14682 Building Sealing Material Terminology
GB/T 16422.2 Test methods for exposure of plastics - Part 2. Xenon arc lamps
GB/T 16491 electronic universal testing machine
3 Terms and definitions
The terms and definitions defined in GB/T 14682 apply to this document.
4 standard test conditions
The laboratory standard test conditions are. temperature (23 ± 2) ° C, relative humidity (50 ± 5)%; the structural adhesive used for testing before the preparation of the test piece and
The test equipment should be placed under standard conditions for more than 24 hours.
5 Preparation and processing of test pieces
5.1 Test apparatus
5.1.1 Substrate regulations
5.1.1.1 The test substrate shall be selected according to the type of substrate to which the structural adhesive is applied. The substrate shall have sufficient strength to prevent bending deformation and damage. Embedded
The shape and size of the structural adhesive test piece shall be the same as those shown in Figure 1 and Table 1. Other materials and sizes may be used.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37126-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 37126-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37126-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37126-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|