|
US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33523.70-2020: Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33523.70-2020 | English | 559 |
Add to Cart
|
5 days [Need to translate]
|
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
| Valid |
GB/T 33523.70-2020
|
PDF similar to GB/T 33523.70-2020
Basic data | Standard ID | GB/T 33523.70-2020 (GB/T33523.70-2020) | | Description (Translated English) | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.20 | | Word Count Estimation | 30,315 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 33523.70-2020: Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Product Geometric Technical Specification (GPS) Surface Structure Area Method Part 70: Physical Measurement Standard)
ICS 17:040:20
J04
National Standards of People's Republic of China
Product Geometric Specification (GPS) Surface Structure
Regional Law Part 70: Physical Measurement Standards
(ISO 25178-70:2014,MOD)
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General 1
5 Requirements of physical measurement standards 2
6 Types of physical measurement standards 2
7 Profile method physical measurement standard 4
8 Area method physical measurement standards 12
9 Physical measurement certificate 19
Appendix A (Normative Appendix) Measurement Requirements 20
Appendix B (informative appendix) Comparison table of names of physical measurement standards 21
Appendix C (informative appendix) Spacing measurement values on the evaluation area instrument 22
Appendix D (informative appendix) Irregular measurement standards 24
Appendix E (Informative Appendix) Relationship with GPS Matrix Model 26
Reference 27
Foreword
GB/T 33523 "Geometric Technical Specifications for Products (GPS) Surface Structure Area Law" is divided into the following parts:
---Part 1: Representation of surface structure;
---Part 2: Terms, definitions and surface structure parameters;
---Part 3: Standardized Operation Set;
---Part 6: Classification of surface structure measurement methods;
---Part 70: Physical measurement standards;
---Part 71: Software measurement standards;
---Part 72: XML file format x3p;
---Part 73: Terms and definitions for measuring surface defects of materials;
--- Part 600: Metrological characteristics of the area topography measurement method;
--- Part 601: Nominal characteristics of contact (stylus) instruments;
---Part 602: Nominal characteristics of non-contact (confocal chromatic aberration probe) instruments;
---Part 603: Nominal characteristics of non-contact (phase-shifting interference microscope) instruments;
--- Part 604: Nominal characteristics of non-contact (coherent scanning interference) instruments;
---Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments;
---Part 606: Nominal characteristics of non-contact (zoom) instruments;
--- Part 607: Nominal characteristics of non-contact (confocal microscope) instruments;
---Part 701: Calibration and measurement standards for contact (stylus) instruments:
This part is part 70 of GB/T 33523:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
This part uses the redrafting method to modify and adopt ISO 25178-70:2014 "Geometrical Technical Specifications for Products (GPS) Surface Structure: Area
Law Part 70: Physical Measurement Standards:
Compared with ISO 25178-70:2014, this part has technical differences: The corresponding technical differences and their reasons are as follows:
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments:
The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows:
● Replace ISO 3274 with GB/T 6062, which is equivalent to the international standard (see Chapter 3);
● Replace ISO 10012 with GB/T 19022 equivalent to the international standard (see Chapter 9);
● Replace ISO /IEC 17025 with GB/T 27025 equivalent to the international standard (see Chapter 9);
● Replace ISO 25178-2 with GB/T 33523:2 which is equivalent to adopting international standards (see Chapter 3 and Chapter 4);
● Replace ISO 25178-601 with GB/T 33523:601 which is equivalent to the international standard (see Chapter 3);
● Use JJF1001-2011 instead of ISO /IEC Guide99:2007 (see Chapter 3):
This section also made the following editorial changes:
---In accordance with the requirements of GB/T 1:1-2009, in the "Scope" chapter, "This part is applicable to surface structure standards based on the regional method
The chain, chain ring G defines the contour surface structure and the measurement standard for the calibration of the metrological characteristics of the area surface structure measuring instrument: ":
This part is proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240):
Drafting organizations of this section: Tsinghua University, Shandong University, China Machinery Productivity Promotion Center, Harbin Institute of Technology, Shandong Daoxian for Intelligence
Technology Co:, Ltd:, Huazhong University of Science and Technology, Shandong Institute of Metrology:
The main drafters of this section: Zhang Zhen, Yan Peng, Ming Cuixin, Lang Yanmei, Liu Chenguang, Lu Wenlong, Zhu Yue, Cao Cong:
Product Geometric Specification (GPS) Surface Structure
Regional Law Part 70: Physical Measurement Standards
1 Scope
This part of GB/T 33523 specifies the physical measurement standards used to periodically verify and adjust the area method surface structure measuring instrument
characteristic:
This section applies to the surface structure standard chain based on the area method, the contour surface structure defined by the link G and the area surface structure measuring instrument
The measurement standard for calibration of metrological characteristics:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 6062 Product Geometrical Technical Specification (GPS) Surface structure contour method Contact (stylus) type instrument nominal characteristics
(GB/T 6062-2009, ISO 3274:1996, IDT)
GB/T 19022 Measurement Management System Requirements for Measurement Process and Measuring Equipment (GB/T 19022-2003, ISO 10012:
2003, IDT)
GB/T 27025 General requirements for the competence of testing and calibration laboratories (GB/T 27025-2019, ISO /IEC 17025:2017,
IDT)
GB/T 33523:2 Product Geometric Technical Specification (GPS) Surface Structure Area Method Part 2: Terms, Definitions and Surface Structure
Parameters (GB/T 33523:2-2017, ISO 25178-2:2012, IDT)
GB/T 33523:601 Product Geometric Technical Specification (GPS) Surface Structure Area Method Part 601: Contact (stylus) type instrument
Nominal characteristics of the detector (GB/T 33523:601-2017, ISO 25178-601:2010, IDT)
JJF1001-2011 General measurement terms and definitions
3 Terms and definitions
The following terms and definitions defined in GB/T 6062, GB/T 33523:2, GB/T 33523:601 and JJF1001 apply to this
file:
3:1
Material measure
Have the assigned value, reproduce in a fixed form when used or provide a special measurement for surface structure measurement with one or more values
Quantity standard:
Note 1: The indicated value of the physical measurement standard is the assigned value:
Note 2: The physical measurement standard can be a measurement standard:
Note 3: Physical measurement standards are sometimes called calibration samples, calibration samples, calibration standards, standard products, physical measurement standards or physical standards:
Note 4: Rewrite JJF1001-2011, definition 6:5:
4 General
Physical measurement standards can generally be used for two different purposes:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33523.70-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 33523.70-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33523.70-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33523.70-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|