|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33332-2016: Test method for dynamic shear strength of adhesive tapes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33332-2016 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Test method for dynamic shear strength of adhesive tapes
| Valid |
GB/T 33332-2016
|
PDF similar to GB/T 33332-2016
Basic data | Standard ID | GB/T 33332-2016 (GB/T33332-2016) | | Description (Translated English) | Test method for dynamic shear strength of adhesive tapes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 10,169 | | Date of Issue | 2016-12-13 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | National Standard Notice No.287 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33332-2016: Test method for dynamic shear strength of adhesive tapes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for dynamic shear strength of adhesive tapes
ICS 83.180
G38
National Standards of People's Republic of China
Test method for dynamic shear strength of adhesive tape
2016-12-13 released
2017-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard is under the jurisdiction of the National Adhesive Standardization Technical Committee (SAC/TC185).
The standard drafting unit. Guangzhou Hongchang Adhesive Tape Factory, Kaiping City Qi Yu Adhesive Products Technology Co., Ltd., Shanghai Rubber Products Research Institute
Limited company, Dongguan City Branch Health Detection Instrument Co., Ltd., Evergreen Adhesive (Zhongshan) Co., Ltd.
The main drafters of this standard. Tang Minfeng, Wu Weixing, Wang Shenghua, Luo Jier, Su Ping, He Hanjian, Cheng Xin, Pan Dafan.
Test method for dynamic shear strength of adhesive tape
1 Scope
This standard specifies the test method for the dynamic shear strength of adhesive tapes.
This standard is suitable for the determination of dynamic shear strength of adhesive tape for the quality control of adhesive tape products.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Standard Test Method for Surface Roughness and Peak Number of Cold Rolled Sheet (Sheet) GB/T
GB/T 3280 stainless steel cold rolled steel sheet and strip
GB/T 22396 Terms for Pressure - Sensitive Adhesive Products
3 terms and definitions
GB/T 22396 Definitions and the following terms and definitions apply to this document.
3.1
Dynamic shear strength dynamicshearstrength
Under the condition of specifying the width, the adhesive tape is attached to a specific adhesive surface and pulled at a constant rate in the direction parallel to the bonding surface
The maximum force required for the occurrence of adhesive failure.
Note. The unit is N/cm.
4 classification
According to the different types of adhesive tape, adhesive tape dynamic shear strength test method is divided into three types. single-sided adhesive tape, double-sided adhesive tape and foam
Adhesive tape.
5 principle
The adhesive tape sample was adhered to the test steel plate under a certain pressure, and the adhesive tape was applied at a constant rate in the direction parallel to the bonding surface
Plus tensile shear force. Adhesive tape adhesive layer in the role of shear under the action of deformation, with the increase in shear force, adhesive tape adhesive layer
Deformation increases and eventually occurs due to bonding damage.
6 instruments and materials
6.1 testing machine
Using constant speed tensile testing machine. The test machine shall be provided with two clamps whose clamping surfaces are in the same plane in the direction of movement. A clip
With a speed of 5mm/min uniform movement, the test accuracy should be no less than 1%.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33332-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33332-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33332-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33332-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|