|
US$119.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33334-2016: Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies (composite and composite)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33334-2016 | English | 119 |
Add to Cart
|
2 days [Need to translate]
|
Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies (composite and composite)
| Valid |
GB/T 33334-2016
|
PDF similar to GB/T 33334-2016
Basic data | Standard ID | GB/T 33334-2016 (GB/T33334-2016) | | Description (Translated English) | Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies (composite and composite) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 6,674 | | Date of Issue | 2016-12-13 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | National Standard Notice No.289 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33334-2016: Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies (composite and composite)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies (composite and composite)
ICS 83.180
G38
National Standards of People's Republic of China
Test method for tensile shear strength of adhesive for single
(Composite materials for composite materials)
2016-12-13 released
2017-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard is under the jurisdiction of the National Adhesive Standardization Technical Committee (SAC/TC185).
The drafting of this standard. Inner Mongolia Aerospace Honggang Machinery Co., Ltd., Shanghai Kangda Chemical New Materials Co., Ltd., Beijing Tianshan new
Material Technology Co., Ltd., Shanghai Rubber Products Research Institute Co., Ltd.
The main drafters of this standard. Yan Kefei, Xie Deyou, Hou Zhongjun, Du Meina, Hu Hongmei, Tuoya Ya, Chen Yaju, Zhang Pengfei, Qi Faqiang,
Xu Biao, Chen Sen, Guo Yaping, Lin Junfeng, Yang Zaqing.
Test method for tensile shear strength of adhesive for single
(Composite materials for composite materials)
1 Scope
This standard specifies the principle, test equipment, sample preparation, test procedure and results of the test method for single shear tensile strength of adhesive
Analysis and so on.
This standard is suitable for testing the tensile strength of single lap tensile between fiber reinforced plastic composites.
This standard applies to the establishment of adhesive material database, quality control, performance comparison, material development and material selection.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2943 Adhesive Terminology
Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170
GB/T 16997 Adhesive representation of major failure types
GB/T 20740 Adhesive Sampling
GB/T 21526 Structural adhesives - Guidelines for surface treatment of metals and plastics before bonding
3 terms and definitions
GB/T 2943 and the following terms and definitions apply to this document.
3.1
Single bond tensile shear strength strengthinshearbytensionloadingofsingle-lap-jointlaminatedassemblies
The main surface portions of the two substrates are laminated and glued together to form a single lap joint, which is parallel to the tensile load in the axial direction of the lap
Use the next, so that the failure of a single lap joint.
4 principle
Through the end of the substrate to add the plate to form a geometric anti-symmetrical structure of the sample, parallel to the lap in the axial tensile load, the sample
To break the shear stress at the lap.
Note 1. Single lap grafts are economical, practical and easy to prepare. The sample is an adhesive, adhesive product development, evaluation and comparative study, including manufacturing quality control
The most widely used form of the system.
Note 2. The shear strength values obtained from a single lap joint can not be used as a structural stress for structural gluing.
5 test equipment
The test equipment shall meet the following requirements.
a) the relative error of the test machine load should not exceed 1%;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33334-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33334-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33334-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33334-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|