|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3300-2008: Standard test method for deformation measurement of domestic ceramic ware
Status: Valid GB/T 3300: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3300-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Standard test method for deformation measurement of domestic ceramic ware
| Valid |
GB/T 3300-2008
|
| GB/T 3300-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Standard test method for deformation measurement of domestic ceramic ware
| Obsolete |
GB/T 3300-1991
|
PDF similar to GB/T 3300-2008
Basic data | Standard ID | GB/T 3300-2008 (GB/T3300-2008) | | Description (Translated English) | Standard test method for deformation measurement of domestic ceramic ware | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y24 | | Classification of International Standard | 81.060.20 | | Word Count Estimation | 6,642 | | Date of Issue | 2008-08-28 | | Date of Implementation | 2008-12-01 | | Older Standard (superseded by this standard) | GB/T 3300-1991 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies test methods ceramic ware deformation. This standard applies to pottery, stoneware, porcelain, excluding special-shaped products. | GB/T 3300-2008: Standard test method for deformation measurement of domestic ceramic ware---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for deformation measurement of domestic ceramic ware
ICS 81.060.20
Y24
National Standards of People's Republic of China
Replacing GB/T 3300-1991
Ceramic ware deformation test methods
Posted 2008-08-28
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 3300-1991 "ceramic ware deformation test methods."
This standard compared with GB/T 3300-1991, the main changes are as follows.
--- Amend Chapter 1, "scope";
--- Increased Chapter 2, "Terms and Definitions", Chapter 3, "Principle," and Chapter 6, "Inspection Report";
--- Original standard 2.2.2 "foot wedge high precision, accurate measurement, inspection and arbitration provisions of the ceramic measuring deformation can also be used to
Seeking more stringent classification of ceramic deformation inspection "and 2.2.3" foot ladder because precision is not high, only for the strict requirements of the rapid test. "
Modify this standard "wedge 4.3 feet flat products as deformation arbitration test measuring tool";
--- Original standard 2.3.2a. The "gently rub into the space of the highest point without a sense of resistance" to modify this standard 4.2.2a)
"The highest point gently into the void and there is a sense of resistance."
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Center ceramics.
This standard is drafted by. National Ceramic Products Quality Supervision and Inspection Center (Jiangxi).
Participated in the drafting of this standard. Guangxi Sanhuan Enterprise Group Co., People's Republic of China Entry-Exit Inspection and Jingdezhen
Quarantine Bureau.
The main drafters of this standard. Cheng Guoan, Tong Yuying, easy edge, Yuan Wen-chan, Huta.
This standard replaces the standards previously issued as follows.
--- GB/T 3300-1982, GB/T 3300-1991.
Ceramic ware deformation test methods
1 Scope
This standard specifies the test method for deformation ceramic ware.
This standard applies to pottery, stoneware, porcelain, excluding special-shaped products.
2 Terms and definitions
The following terms and definitions apply to this standard.
2.1
Rim height difference between the maximum and minimum height.
2.2
The maximum difference between the diameter and the minimum diameter of the outer diameter.
2.3
From the article inside rim level to the lowest depth of 25mm or less flat ceramics.
2.4
Products from rim to the horizontal plane is greater than the minimum internal depth of 25mm ceramic products.
Principle 3
With a rim height difference characterize the deformation of flat products; poor characterization of deformation outer diameter of the hollow article.
4 Determination of deformed flat products
4.1 Measuring Tools
4.1.1 Glass plates
Use 10 test precision flatness ruler glass plate, a glass plate and requires no significant gap between the ruler. Glass panel size
Should be greater than the size of the test article.
4.1.2 Wedge foot
Wedge feet long 220mm, width 6mm, an upper edge width of 0.2mm ~ 0.5mm (see Figure 1). Bottom surface height error ≤0.05mm. bottom
Surface flatness ≤0.05mm, the requirements of surface roughness of engraved lines and clear scale.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3300-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3300-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3300-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3300-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3300-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3300-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|