|
US$569.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32191-2015: Leakage current tester
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32191-2015 | English | 569 |
Add to Cart
|
5 days [Need to translate]
|
Leakage current tester
| Valid |
GB/T 32191-2015
|
PDF similar to GB/T 32191-2015
Basic data | Standard ID | GB/T 32191-2015 (GB/T32191-2015) | | Description (Translated English) | Leakage current tester | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N20 | | Classification of International Standard | 17.220.20 | | Word Count Estimation | 27,275 | | Date of Issue | 2015-12-10 | | Date of Implementation | 2016-07-01 | | Regulation (derived from) | National Standard Announcement 2015 No.38 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32191-2015: Leakage current tester---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Leakage current tester
ICS 17.220.20
N20
National Standards of People's Republic of China
Leakage current tester
Issued on. 2015-12-10
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Product Category 2
5 Requirement 2
6 Test methods 6
7 Inspection rules 12
8 signs, packaging, transportation and storage 13
Appendix A (normative) body impedance network 15
Appendix B (normative) pilot projects and recommended test sequence 19
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Machinery Industry Federation.
This standard by the National Electrical Instrument Standardization Technical Committee (SAC/TC104) centralized.
This standard was drafted. Shandong Institute of Metrology, Metrology Qingdao, Shanghai Instrument Research Institute, Henan Branch metering
Graduate School, Haut Shandong Electric Co., Ltd. Shenzhen neutron measurement and control instruments, Qingdao Aino Intelligent Instrument Co., Ltd., Zhejiang
Institute of Metrology, Institute of Metrology, Jiangsu Province, Suzhou City, Wei Ming Electronics Instrument Co., Ltd., Guangzhou Traffic Technician College, Zhejiang salty
Hang International General Equipment Co., Ltd. Shanghai Shun Ho Technology Co., Ltd. on Haixi Rui electronic equipment.
The main drafters of this standard. Ma Xuefeng, Zhang Qin, Li Wenqiang ity, Tenghua Jiang, Chen Qingping, Jia Weibo, Luguo Sen, Wang Yansong, Luo Jin,
Fan Yi, floor Zhibin, Houdian Cheng, Yang Feng, NARI Pavilion, Wang Hing, ying, Xu Mingjie.
Introduction
"Leakage" has been the term used to express a number of different concepts, such as exposure to electric current, protective conductor current, insulation properties, currently located
Standard equipment is still represented by the term during contact with the device current flows through the human body or the human body model, actually refers to the current contacts,
Given this usage, this standard is still use the term "leakage current" term.
In the past, the standard device leakage current is measured using two techniques, one is measuring the actual protective conductor current, the second is to use a simple
--- Resistor capacitor network (representing a human body model), measuring the current flowing through the resistor.
With the electronic switching technology is widely used in power systems and equipment, the circuit generates a high frequency harmonic voltage and harmonic current;
At the same time, in terms of security, the main consideration may be harmful current flow through the body (not necessarily equal to the current flow through the protective conductor current); In addition,
Currently found that the current early stage when developing standards that the human body has several effects to consider more complicated than the effect on the human body.
For these reasons, this International Standard GB/T 12113-2003 provisions, according to the human effects of leakage current (perception, reaction, swing
Off and electrical burns) define different measurement networks. In these four effects, the perception, reaction and get rid of the leakage current peak related, and
And with the change in frequency varies; rms electrical burns and leakage current is related but independent of frequency.
Leakage current tester
1 Scope
This standard specifies the leakage current tester of terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation
And storage.
This standard applies to AC leakage current tester (hereinafter referred to as "testers") and leakage current measuring safety performance integrated test apparatus
Test section.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-
1.2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-
2.2007, IDT)
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h
12h cycle) (IEC 60068-2-30.2005, IDT)
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC
60068-2-6.1995, IDT)
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment Part 1. General requirements (IEC 61010-
1.2001, IDT)
GB/T 5169.10-2006 Fire hazard testing for electric and electronic products - Part 10. Glowing/hot wire based test methods for burning
Hot wire apparatus and common test procedure (IEC 60695-2-10.2000, IDT)
GB/T 6592-2010 Electrical and electronic measurement equipment - Expression of performance (IEC 60359.2001, IDT)
GB radio disturbance characteristics - Limits and methods of measurement 9254-2008 information technology equipment (CISPR22.2006, IDT)
GB/T 12113-2003 touch current and protective conductor current measurement method (IEC 60990.1999, IDT)
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,
IDT)
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.2002, IDT)
GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity
Test (IEC 61000-4-11.2004, IDT)
IEC 60050-151.2001 International Electrotechnical Vocabulary (IEV) electric and magnetic devices (InternationalElectrotechnicalVocabu-
lary.Part 151. Electricalandmagneticdevices)
IEC 60050-195.1998 International Electrotechnical Vocabulary (IEV) to prevent electric shock grounding and protection (InternationalElectrotechnical
Vocabulary-Part 195. Earthingandprotectionagainstelectricshock)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32191-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32191-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32191-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32191-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|