|
US$399.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3177-2009: Geometrical product specifications (GPS) -- Inspection of plain workpiece sizes
Status: Valid GB/T 3177: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3177-2009 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Geometrical product specifications (GPS) -- Inspection of plain workpiece sizes
| Valid |
GB/T 3177-2009
|
| GB/T 3177-1997 | English | 599 |
Add to Cart
|
4 days [Need to translate]
|
Inspection of plain workpiece sizes
| Obsolete |
GB/T 3177-1997
|
| GB/T 3177-1982 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Inspection of plain workpiece sizes
| Obsolete |
GB/T 3177-1982
|
PDF similar to GB/T 3177-2009
Basic data | Standard ID | GB/T 3177-2009 (GB/T3177-2009) | | Description (Translated English) | Geometrical product specifications (GPS) -- Inspection of plain workpiece sizes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.01 | | Word Count Estimation | 17,171 | | Date of Issue | 2009-03-16 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 3177-1997 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.2 (Total No.142) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the acceptance of the principle of smooth workpiece size test, acceptance limits, measurement uncertainty value of measuring instruments and measuring instruments allow selection principles. This standard applies to the use of general-purpose measuring instruments such as vernier caliper, micrometer and workshop use comparator, projectors measuring meter, to note that on the pattern of tolerance class 6 ~ 18 (IT6 ~ IT18), nominal size to inspection smooth workpiece size of 500mm. This standard also applies to the general tolerances test. | GB/T 3177-2009: Geometrical product specifications (GPS) -- Inspection of plain workpiece sizes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS) .Inspection of plain workpiece sizes
ICS 17.040.01
J04
National Standards of People's Republic of China
Replacing GB/T 3177-1997
Geometrical product specifications (GPS)
Smooth workpiece size test
Posted 2009-03-16
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is published since 1997, it has been widely used. This revision is mainly based on the existing Geometrical Product Specifications
(GPS) standard system and consider coordination with the relevant standards to be modified.
This standard replaces GB/T 3177-1997 "smooth workpiece size test", the main changes are as follows.
--- Increase the standard name Geometrical Product Specifications (GPS) of the main title;
--- Chapter 1, "Scope", "This standard applies to ordinary measuring instruments such as calipers, micrometer and workshop use comparator, etc."
The words "This standard applies to the use of general-purpose measuring instruments such as calipers, micrometer and workshop use comparator, equivalent amount projector
A meter ";
--- Added "Chapter 3 Terms and definitions";
--- "Basic size" to "nominal size";
--- "Max limit entities" and "minimum physical limit" to "maximum material size" and "minimum physical dimension";
--- Chapter 7 (formerly Chapter 6) "arbitration" to increase the "general press GB/T 18779.1 be pass or fail determination" of
content;
--- Standard Measurement Uncertainty Evaluation recommended method GB/T 18779.2 specified;
--- Added "Appendix C in the GPS matrix mode position."
The Standard Appendix A, Appendix B and Appendix C are informative appendices.
The standard dimensions and geometry by the National Technical Committee of Standardization Technical specifications and centralized.
This standard was drafted. Mechanical Engineering Research Institute of Machine Productivity Promotion Center, Shenzhen Academy of Metrology and Quality Inspection, measuring Hexagon
The amount of technology (Qingdao) Co., Ltd., Shanghai University, Beijing Institute of Metrology detection.
The main drafters of this standard. Li Xiaopei at Jiping, Wang Jin, Chenzuo Min, red eagle Jie, Li Ming, Wu Xun.
This standard replaces the standards previously issued as follows.
--- GB 3177-1982, GB/T 3177-1997.
Geometrical product specifications (GPS)
Smooth workpiece size test
1 Scope
This standard specifies the principles of a smooth workpiece size acceptance testing, acceptance limits of measurement uncertainty of measuring instruments and gauges allow values
A selection principles.
This standard applies to the use of general-purpose measuring instruments such as calipers, micrometer and workshop use comparator, projectors and other measuring instrument for
Note that the pattern of tolerance grade 6 to grade 18 (IT6 ~ IT18), nominal size until smooth workpiece size of 500mm test.
This standard also applies to the general tolerances of inspection.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
(GPS) Limits and tolerances, deviations and fits the basis of GB/T 1800.1-2009 Geometrical product specifications
(ISO 286-1. 1988, MOD)
GB/T 4249-2009 Geometrical product specifications (GPS) principles of tolerance (ISO 8015. 1985, MOD)
GB/T 18779.1-2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1. Press
Specification test pass or fail decision rules (eqv ISO 14253-1.1998)
(GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 GB/T 18779.2-2004 Geometrical product specifications. test
Uncertainty Evaluation Guide volume device calibration and product testing in GPS measurements (ISO /T S14253-2.1999, IDT)
GB/T 18780.1-2002 Geometrical product specifications (GPS) - Geometrical features - Part 1 Basic terms and definitions
(ISO 14660-1.1999, IDT)
GB/T 19765-2005 Geometrical product specifications (GPS) Geometrical product specifications and inspection standard reference temperature
(ISO 1.2002, IDT)
GB /Z20308-2006 Geometrical product specifications (GPS) Master Plan (ISO /T R14638.1995, MOD)
3 Terms and Definitions
GB/T 1800.1, GB/T 4249, the terms and definitions GB/T 18779.1 and GB/T 18780.1 established apply to this standard.
4 General
4.1 Acceptance of the principle of
Acceptance method should only be used to receive the work within the specified limits of size within.
4.2 Acceptance based approach
Since the measuring instruments and measurement systems have inherent errors, it can not be measured by any measurement true value. In addition, most common measuring instruments
Usually only used to measure the size, shape measurement errors may not exist on the workpiece. Therefore, the size required to follow an inclusive element of the workpiece
It should also improve the inspection and measuring shape errors (such as roundness, straightness, etc.), and the results of measurements of the shape and size of the integrated error
Up to determine whether all parts of the surface exceeds the maximum entity boundary.
In the workshop the actual case, the shape error of the workpiece often depends on the precision equipment and processing technology and equipment. Workpiece qualified or not, just press
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3177-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 3177-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3177-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3177-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3177-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3177-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|