|
US$1394.00 ยท In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30104.102-2025: Digital addressable lighting interface - Part 102: General requirements - Control gear
Status: Valid GB/T 30104.102: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30104.102-2025 | English | 1394 |
Add to Cart
|
9 days [Need to translate]
|
Digital addressable lighting interface - Part 102: General requirements - Control gear
| Valid |
GB/T 30104.102-2025
|
| GB/T 30104.102-2021 | English | 1064 |
Add to Cart
|
3 days [Need to translate]
|
Digital addressable lighting interface - Part 102: General requirements. Control gear
| Valid |
GB/T 30104.102-2021
|
| GB/T 30104.102-2013 | English | RFQ |
ASK
|
7 days [Need to translate]
|
Digital addressable lighting interface -- Part 102: General requirements -- Control gear
| Obsolete |
GB/T 30104.102-2013
|
Basic data | Standard ID | GB/T 30104.102-2025 (GB/T30104.102-2025) | | Description (Translated English) | Digital addressable lighting interface - Part 102: General requirements - Control gear | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.50 | | Word Count Estimation | 70,799 | | Date of Issue | 2025-08-01 | | Date of Implementation | 2026-02-01 | | Older Standard (superseded by this standard) | GB/T 30104.102-2021 | | Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China | GB/T 30104.102-2025: Digital addressable lighting interface - Part 102: General requirements - Control gear
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30104.102-2025
ICS 29.140.50
CCSK74
National Standard of the People's Republic of China
Replaces GB/T 30104.102-2021
Digital Addressable Lighting Interface
Part 102.General requirements for control devices
Part 102.General requirements-Controlgear
(IEC 62386-102.2022, IDT)
Released on August 1, 2025
Implementation on February 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General Requirements 4
5 Electrical Specifications 4
6 Bus power 4
7 Transmission Protocol Framework Structure 5
8 Timing 6
9 Operation Method 6
10 Variable Declaration 35
11 Instruction Definition 36
Appendix A (Informative) Algorithm Example 57
Appendix B (Normative) High Resolution Dimmer 58
Reference 60
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is part 102 of GB/T 30104 Digital Addressable Lighting Interface. GB/T 30104 has been published in the following parts.
--- Part 101.General requirements for system components;
--- Part 102.General requirements for control devices;
--- Part 103.General requirements for control equipment;
--- Part 104.General requirements for wireless and other wired system components;
--- Part.201.Particular requirements for control gear for fluorescent lamps (equipment type 0);
--- Part 202.Particular requirements for control devices Self-contained emergency lighting (equipment type 1);
--- Part 203.Particular requirements for control gear for discharge lamps (other than fluorescent lamps) (equipment type 2);
--- Part 204.Particular requirements for control gear for low-pressure tungsten halogen lamps (equipment type 3);
--- Part 205.Particular requirements for control gear for incandescent lamp supply voltage controllers (equipment type 4);
--- Part 206.Particular requirements for control devices converting digital signals into DC voltage (equipment type 5);
--- Part 207.Particular requirements for control gear LED modules (equipment type 6);
--- Part 208.Particular requirements for control devices switching functions (equipment type 7);
--- Part 209.Particular requirements for control devices Color control (equipment type 8);
--- Part 220.Particular requirements for control devices - Central power supply emergency operation (device type 19);
--- Part 222.Particular requirements for control devices heat lamp protection (device type 21);
--- Part 301.Special requirements for input device buttons;
--- Part 302.Special requirements for input devices, absolute input devices;
--- Part 303.Special requirements for input device occupancy sensors;
--- Part 304.Special requirements for input devices light sensors.
This document replaces GB/T 30104.102-2021 "Digital addressable lighting interface Part 102.General requirements control devices".
Compared with GB/T 30104.102-2021, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The scope has been changed (see Chapter 1, Chapter 1 of the 2021 edition);
b) The version number has been changed (see 4.2, 2021 version 4.2);
c) Added support for block reads of multi-byte values (see 9.10.5.2);
d) Changed the requirements for memory block 0 and memory blocks for general use (see 9.10.7, 9.10.6 of the 2021 edition);
e) The reserved memory blocks have been changed (see 9.10.10, 9.10.9 of the 2021 edition);
f) Increased the non-volatile memory (NVM) save time and deleted the save permanent variables (see 9.17, 2021 version 9.17 and
11.4.4);
g) Added bus unit configuration (see 9.20).
This document is equivalent to IEC 62386-102.2022 "Digital addressable lighting interface Part 102.General requirements controlgear".
The following minimal editorial changes have been made to this document.
--- Corrected the reference clause (see 9.8.1).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Light Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224).
This document was drafted by. Zhongshan Quality Metrology Supervision and Inspection Institute of Guangdong Province, National Electric Light Source Quality Supervision and Inspection Center (Beijing), Ningbo
Yaotai Optoelectronics Technology Co., Ltd., Self Electronics Co., Ltd., Zhongshan Songwei Lighting Appliance Co., Ltd., Beijing Electric Light Source Research Institute
Ltd.
The main drafters of this document are. Peng Zhenjian, Li Yanjie, Fang Yi, Jin Xiaoming, Xie Wei, and Liang Shenglong.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 30104.102-2013 in.2013, first revised in 2021;
---This is the second revision.
introduction
GB/T 30104 (all parts) specifies a bus system for controlling electronic lighting equipment through digital signals, which is intended to consist of the following
Partial composition.
Part 103 specifies the general requirements for control devices, Part 104 and Part 105 specify the general requirements for control devices,
Part 104 specifies requirements for wireless and other wired system components.
Part 105 describes the firmware transfer. Part 150 gives the requirements for the auxiliary power supply, which can be independent or
Can be built into the control device or control equipment.
The purpose of this standard is to specify the special requirements for control devices for specific types of light sources.
The purpose of this standard is to specify the special requirements for various types of input devices.
Part 1 can be used together with GB/T 30104.103 for control equipment.
GB/T 30104 is published as a series of standards divided into several parts to facilitate future revision and amendment, and to add new parts when necessary.
Other requirements.
The structure of the series of standards is shown in Figure 1 as follows.
Figure 1 Overview of GB/T 30104
Other sections also include additional requirements.
Unless otherwise specified, all numbers used in this document are decimal. Hexadecimal numbers are given in the format 0xVV.
The "x" in the number means "any value".
Use the following typographical expressions.
Variable. "variable name" or "variable name [3.0]", only gives the 3rd to 0th digits of the variable name;
Value range. [minimum, maximum];
Command. "command name".
Digital Addressable Lighting Interface
Part 102.General requirements for control devices
1 Scope
This document specifies the general requirements, electrical specifications, bus power supply, transmission protocol frame structure, timing, operation method, variables, etc. of the control device.
Declarations and directive definitions.
This document applies to control gear controlled by digital signals from electronic lighting equipment.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 30104.101-2025 Digital addressable lighting interface Part 101.General requirements System components (IEC 62386-
101.2022,IDT)
IEC 62386-101 Digital addressable lighting interface Part 101.General requirements System components (Digitaladdressable
IEC 62386-103.2022 Digital addressable lighting interface Part 103.Particular requirements for control equipment (Digital
Note. GB/T 30104.103-2017 Digital Addressable Lighting Interface Part 103.Particular Requirements Control Equipment (IEC 62386-103.2014, IDT)
(all sections)]
3 Terms and Definitions
For the purposes of this document, the terms and definitions defined in IEC 62386-101 and the following apply.
For standardized use, ISO and IEC maintain terminology databases at the following addresses.
3.1
Actual power levelactuallevel
Indicates the current light output value.
3.2
Arc power arcpower
The power supplied to the light source (lamp).
3.3
broadcast
Type of addressing used to simultaneously address all control devices in a system.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30104.102-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 30104.102-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30104.102-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30104.102-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 30104.102-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30104.102-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|