|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30093-2013: Reliability technique review procedure for automation control system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30093-2013 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Reliability technique review procedure for automation control system
| Valid |
GB/T 30093-2013
|
PDF similar to GB/T 30093-2013
Basic data | Standard ID | GB/T 30093-2013 (GB/T30093-2013) | | Description (Translated English) | Reliability technique review procedure for automation control system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N10 | | Classification of International Standard | 25.040.40 | | Word Count Estimation | 13,132 | | Quoted Standard | GB/T 2900.13; GB/T 4888; GB/T 7826; GB/T 7827; GB/T 7828-1987; GB/T 7829; GB/T 14394-2008 | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides for the automatic control system (hereinafter referred to as the System) reliability technology assessment procedures and requirements. This standard applies to industrial process measurement and control system in the program demons | GB/T 30093-2013: Reliability technique review procedure for automation control system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reliability technique review procedure for automation control system
ICS 25.040.40
N10
National Standards of People's Republic of China
Automated control system reliability technology assessment program
Issued on. 2013-12-17
2014-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Distribution of this document
Institutions do not assume the responsibility to identify these patents.
The standard proposed by China Machinery Industry Federation.
This standard by the national industrial process measurement and control Standardization Technical Committee (SAC/TC124) centralized.
This standard is drafted by. Chongqing Industrial Automation Instrument Research Institute, Chongqing Qianwei Instrument limited liability company.
Participated in the drafting of this standard. Shanghai Industrial Automation Instrument Research Institute, Hangzhou Institute of Automation Technology, Kunshan Shuangqiao Sensor Measurement and Control
Technology Co., Ltd. EVOC Intelligent Technology Co., Ltd., Shanghai Automation Instrumentation Co., Ltd., Shanghai Weier Tai Industrial Automation Unit
Parts Limited, Beijing Institute of Automation Technology, Beijing Far East Instrument Co., Ltd., Central-day instrument Co., Ltd., Chongqing Sichuan Instrument Automation
Co., Ltd., Chongqing Institute of Science and Technology.
The main drafters of this standard. Hexiao Zhen, Liuxing Li, WANG Wen-li, Yan Zhaodong.
Participate drafters of this standard. Xieya Lian, Bu Yan, Lvchun place, especially the color red, Bing, Chen column, Ren Junmin, loose buttons, the Lu Xiaomeng, Zhao Lixing,
Wang Yue, Ji Feng, Huang Yi Pu, Sunhuai Yi, Liu Qin, Liu Xiaoli, Long Ping.
Automated control system reliability technology assessment program
1 Scope
This standard provides for the automatic control system (hereinafter referred to as system) reliability assessment procedures and technical requirements.
This standard applies to industrial process measurement and control systems in the demonstration phase of the program, the development stage, production and use phases of reliability
Technical review. Other systems may use reference.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.13 Electrotechnical terminology credibility and quality of service
GB/T 4888 fault tree terminology and symbols
GB/T 7826 system reliability analysis techniques for failure mode and effects analysis (FMEA) program
GB/T 7827 Reliability Prediction Program
GB/T 7828-1987 Reliability design reviews
GB/T 7829 Fault tree analysis
GB/T 14394-2008 computer software reliability and maintainability management
3 Terms and Definitions
GB/T 2900.13 and GB/T 4888 defined by the following terms and definitions apply to this document.
3.1
System reliability programs reliabilityworkingitemofsystem
System reliability work content of each phase is completed and the formation of the reliability of the design feasibility analysis, reliability, technical reports, reliability
Test reports, ensuring reliability, and field to run the report in general.
3.2
System reliability technical report reliabilitytechnicalreportofsystem
Reliability Analysis and Evaluation System at all stages of the formation of the report, including the reliability of the system is expected, reliability allocation, fault points
Analysis, reliability design technology and so on. It provides the basis for the reliability assessment system identification or acceptance.
3.3
System reliability assessment systemreliabilityreview
System at various stages, has organized experts in accordance with certain procedures, system reliability programs undertaken reviews to give review
Observations and conclusions, to identify weaknesses in the system reliability, make recommendations for improvement.
3.4
Automated control systems automaticcontrolsystem
No one directly involved in the case, the use of additional equipment or device, so that a working status of the machine, equipment or production processes or
Parameters to run automatically according to a predetermined rule. Usually administered by a controlled system and its control system, measuring element, sensing element and associated actuator
And other components.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30093-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30093-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30093-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30093-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|