|
US$1519.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28259-2012: Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28259-2012 | English | 1519 |
Add to Cart
|
10 days [Need to translate]
|
Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment
| Valid |
GB/T 28259-2012
|
PDF similar to GB/T 28259-2012
Basic data | Standard ID | GB/T 28259-2012 (GB/T28259-2012) | | Description (Translated English) | Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 69,692 | | Quoted Standard | GB/T 228.1; GB/T 230.1; GB/T 231.1; GB/T 1040.1; GB/T 2828.1; GB/T 3452.1; GB/T 3452.2; GB/T 4340.1; GB/T 6031; GB/T 9253.2; GB/T 9445; GB/T 15481; GB/T 16783.1; GB/T 19000; GB/T 20972.1; GB/T 20972.2; GB/T 20972.3; GB/T 21410; GB/T 21412.3; GB/T 22342; I | | Adopted Standard | ISO 10432-2004, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 1 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard presents an acceptable subsurface safety valve (SSSV) the minimum requirements for all components involved in subsurface safety valve, these parts tolerances and clearances can affect the performance or subsurface safety valve interchangeabi | GB/T 28259-2012: Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
ICS 75.180.10
E92
National Standards of People's Republic of China
Downhole oil and gas industry equipment
Subsurface safety valve
(ISO 10432.2004, MOD)
Issued on. 2012-03-09
2012-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 3
4 Abbreviations 6
5 Functional Specification 6
6 Technical specifications 8
7 Supplier (manufacturer) requirements 13
8 Repair (maintenance) 20
9 Storage and transport ready 21
Appendix A (normative) bodies require 22
Appendix B (normative) validation testing requirements 24
Annex C (normative) functional testing requirements 33
Annex D (informative) minimum leakage after closure of the non-mandatory requirements 38
Annex E (informative) operating range 39
Annex F (normative) data requirements, Figure (schematic) and Form 41
References 64
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted Law Amendment uses ISO 10432.2004 "oil and gas industries - Downhole equipment - Subsurface safety valve" (English
Chinese Version).
This part of ISO 10432.2004 technical differences are as follows.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● Modify with international standards of GB/T 228.1 instead of ISO 6892-1 (see 7.2.2.1);
● Modify with international standards of GB/T 230.1 instead of ISO 6508-1 (see 7.2.2.1);
● Modify with international standards of GB/T 231.1 instead of ISO 6506-1 (see 7.2.2.1);
● equivalents adoption of international standards GB/T 1040.1 replaces ISO 527-1 (see 7.2.2.2);
● equivalents adoption of international standards GB/T 2828.1 replaces ISO 2859-1 (see 7.6.3);
● Modify with international standards of GB/T 3452.1 replaces ISO 3601-1 (see 7.6.3);
● equivalents adoption of international standards GB/T 3452.2 replaces ISO 3601-3 (see 7.6.3);
● Modify with international standards of GB/T 4340.1 replaces ISO 6507-1 (see 7.2.2.1);
● equivalents adoption of international standards GB/T 6031 instead of ISO 48 (see 7.2.2.2,7.6.3);
● equivalents adoption of international standards GB/T 9253.2 instead APISPEC5B (see 7.6.5.1);
● equivalents adoption of international standards GB/T 9445 instead of ISO 9712 (see 7.6.7.1.1,7.6.8.1,7.6.8.2);
● equivalents adoption of international standards GB/T 15481 replaces ISO 17025 (see A.1);
● equivalents adoption of international standards GB/T 16783.1 instead of ISO 10414-1 (see A.2, B.12.4, B17.4);
● equivalents adoption of international standards GB/T 19000 replaces ISO 9000 (see Chapter 3);
● with the GB/T 20972 (all parts) instead of the ISO 15156 (all parts), the degree of consistency between the various parts of the two criteria
as follows.
● GB/T 20972.1 "oil and gas industry for oil and gas exploration in hydrogen sulfide containing environments materials - Part 1. Options
Optional anti-crack material general principles "(GB/T 20972.1-2007, ISO 15156-1.2001, IDT);
● GB/T 20972.2 "oil and gas industry for oil and gas exploration materials containing hydrogen sulfide environment - Part 2. Anti
Cracking of carbon steel, low alloy steel and cast iron "(GB/T 20972.2-2008, ISO 15156-2.2003, MOD);
● GB/T 20972.3 "oil and gas industry for oil and gas exploration materials containing hydrogen sulfide environments - Part 3. Anti
Cracking corrosion resistant alloys and other alloys "(GB/T 20972.3-2008, ISO 15156-3MOD).
● equivalents adoption of international standards GB/T 21410 replaces ISO 16070 (see 6.3.2.5);
● equivalents adoption of international standards GB/T 21412.3 instead of ISO 13628-3 (see 6.3.6);
● equivalents adoption of international standards GB/T 22342 replaces ISO 10417 (see 7.10.1,8.2).
This standard made the following editorial changes.
--- Remove the ISO 10432.2004 Foreword and Introduction;
--- Remove the ISO 10432. "provisions Note" file in 2004 about the standard reference relationships with other available file specification.
This standard by the national oil drilling equipment and tools for Standardization Technical Committee (SAC/TC96) and focal points.
This standard is drafted by. Only in Zhejiang letter Petroleum Machinery Co., Ltd., China Petroleum & Chemical Corporation Petroleum Exploration and Development Institute
Study hospital.
Participated in the drafting of this standard. the oil industry well control equipment Quality Supervision and Inspection Center, Shengli Oilfield Technology Research Institute, China Ocean
Oil Corporation, Texas continental shelf Petroleum Engineering Technology Co., Ltd.
The main drafters of this standard. Huding Qing, Jiang Xiangdong, Shang Xu Lan, Xiemei Bo, Jiang Haijun, Hufeng Tao, Wu Ji Hao, Bao-wide, Heguang Qing.
Downhole oil and gas industry equipment
Subsurface safety valve
1 Scope
This standard acceptable downhole safety valve (SSSV) the minimum requirements, covering all parts of the downhole safety valve, these parts and
Tolerance and the gap member can affect subsurface safety valve performance or compatibility, as well as maintenance operations and related flow control equipment interface, but
Not involved in connection with the downhole string.
NOTE. subsurface safety valve is an emergency safety device, not to reduce the production/injection rate, discontinued operations and other purpose, nor be used as a return valve.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 228.1 metallic materials at room temperature tensile test of the first part test method (GB/T 228.1-2010, ISO 6892-1.
2009, MOD)
GB/T 230.1 Metallic Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scale)
(GB/T 230.1-2004, ISO 6508-1.1999, MOD)
GB/T 231.1 Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1.2005,
MOD)
GB/T 1040.1 Tensile Properties of Plastics Testing - Part 1 General (GB/T 1040.1-2006, ISO 527-1.1993,
IDT)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 3452.1 hydraulic and pneumatic rubber O-ring Part 1 - Dimensions and tolerances (GB/T 3452.1-2005,
ISO 3601-1.2001, MOD)
GB/T 3452.2 hydraulic and pneumatic rubber O-rings - Part 2 appearance quality inspection standard (GB/T 3452.2-2007,
ISO 3601-3.2005, IDT)
GB/T 4340.1 Vickers hardness test - Part 1. Test method (GB/T 4340.1-2009, ISO 6507-1.2005,
MOD)
GB/T 6031 vulcanized rubber or thermoplastic rubber hardness measurement (10 ~ 100IRHD) (GB/T 6031-1998, ISO 48.
1994, IDT)
GB/T 9253.2 Oil and Gas Industry casing, tubing and line pipe threads, measuring and testing (GB/T 9253.2-1999,
APISPEC5B-1996 Version 14, IDT)
GB/T 9445 NDT personnel qualification and certification (GB/T 9445-2008, ISO 9712.2005, IDT)
GB/T 15481 testing and calibration laboratories General requirements (GB/T 15481-2000, ISO 17025.1999, IDT)
GB/T 16783.1 Petroleum and natural gas industries - Field testing of drilling fluids - Part 1. Water-based drilling fluids (GB/T 16783.1-1997,
ISO 10414-1.1996, IDT)
GB/T 19000 Quality management systems - Fundamentals and vocabulary (GB/T 19000-2008, ISO 9000.2005, IDT)
GB/T 20972.1 oil and gas industry oil and gas exploration in hydrogen containing material thinning environment for Part 1. Selecting the anti-crack
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28259-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28259-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28259-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28259-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|