|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28076-2011: Detection and identification of Liriomyza trifolii (Burgess)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28076-2011 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Detection and identification of Liriomyza trifolii (Burgess)
| Valid |
GB/T 28076-2011
|
PDF similar to GB/T 28076-2011
Basic data | Standard ID | GB/T 28076-2011 (GB/T28076-2011) | | Description (Translated English) | Detection and identification of Liriomyza trifolii (Burgess) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B16 | | Classification of International Standard | 65.020.01 | | Word Count Estimation | 11,114 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-06-01 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the grab dredger dredging Jun monitoring system requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to grab dredger dredging monitoring system design, manufacture, modification and inspection, grab dredger dredging maintenance monitoring system can refer to the use. | GB/T 28076-2011: Detection and identification of Liriomyza trifolii (Burgess)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Detection and identification of Liriomyza trifolii (Burgess)
ICS 65.020.01
B16
National Standards of People's Republic of China
Quarantine and identification of clover leaf miner
DetectionandidentificationofLiriomyzatrifoli (Burgess)
Issued on. 2011-12-30
2012-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the National Standardization Technical Committee of Plant Quarantine (SAC/TC271) and focal points.
This standard was drafted. Chinese Academy of Inspection and Quarantine, People's Republic of China Guangdong Entry-People's Republic of China
Shandong Entry-Exit Inspection and Quarantine Yunnan People's Republic of China, People's Republic of China Beijing Entry-Exit Inspection and Quarantine
Bureau, People's Republic of China Hunan Entry-Exit Inspection and Quarantine Jiangxi People's Republic of China, People's Republic of China
Guangxi CIQ.
The main drafters of this standard. Nai in Chia taught, Wei Xiaotang, Liu Haijun, Liu Zhongshan, Junhua, Jiang Lihui, Lu Jian, Jiang Jinlin,
Huang Lili Feng Yin.
Quarantine and identification of clover leaf miner
1 Scope
This standard defined the clover leaf miner testing, breeding, identification of specimens and laboratory methods.
This standard applies to export plant quarantine, domestic plant quarantine and prevention in the field of clover leaf miner testing, breeding and
Identification.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Inner top bristles innerverticals
After monocular triangle bristles against the inner side of the two pairs one pair of bristles.
2.2
Outer top bristles outerverticals
After monocular triangle side two pairs one pair of outer bristles mane.
2.3
After the top bristles postverticals
Located in the rear triangle monocular one pair of bristles.
2.4
Mustache vibrissae
Located on the lower corner of the cheek mouthparts of the thickest part of one pair of bristles.
2.5
On orbital bristles upperorbitals
Located in the upper half of the orbital bristles.
2.6
Under orbital bristles lowerorbitals
Located in the lower half of the orbital bristles.
2.7
Orbital hair orbitalsetulae
He was born in the orbital part of the fuzz.
2.8
Scutellum scutum
Diptera thoracic tergum located bone fragments and small shield shield ditch ditch between.
2.9
The side panels anepisternum
On the front side of the sheet in the chest section. It is located in the dorsal and ventral sheet between the sheets, large pieces of bone wing side panels before.
2.10
Ventral sheet katepisternum
Under the front side of the sheet in the chest section. It is located below the side panels of an approximately triangular piece of bone.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28076-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28076-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28076-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28076-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|