|
US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25699-2010: Belt crossflow pellet feed dryer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25699-2010 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Belt crossflow pellet feed dryer
| Valid |
GB/T 25699-2010
|
PDF similar to GB/T 25699-2010
Basic data | Standard ID | GB/T 25699-2010 (GB/T25699-2010) | | Description (Translated English) | Belt crossflow pellet feed dryer | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B93 | | Classification of International Standard | 65.060 | | Word Count Estimation | 17,154 | | Date of Issue | 2010-12-23 | | Date of Implementation | 2011-07-01 | | Quoted Standard | GB/T 191; GB/T 3768-1996; GB 4053.3; GB 5226.1; GB/T 6435; GB/T 14095; GB/T 16157; GB 17888.4; GB 23821; GBZ/T 192.1; ISO 2409-2007 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.10 (Total No.165) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the belt cross-flow terms and definitions pellet dryer, model, requirements, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to steam-heated hot air as the drying medium with crossflow pellet dryer (hereinafter referred to as the dryer). | GB/T 25699-2010: Belt crossflow pellet feed dryer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt crossflow pellet feed dryer
ICS 65.060
B93
National Standards of People's Republic of China
With crossflow pellet feed dryer
Issued on. 2010-12-23
2011-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Model 2
5 Requirement 2
5.1 Specifications 2
5.2 Structure and composition requirements 2
5.3 Safety and Health 3
4 5.4 Reliability
5.5 Appearance 4
6 Test Method 4
6.1 Test conditions 4
6.2 static checking 5
6.3 load test 5
6.4 load test 5
7 Inspection rules 10
7.1 Inspection classification 10
7.2 factory inspection 10
7.3 delivery inspection 10
10 7.4 Type inspection
7.5 determine the rules 10
8 signs, packaging, transportation and storage 12
8.1 Marking 12
8.2 Packaging 12
8.3 Transport 12
8.4 Storage 12
Appendix A (informative) test instrumentation and the main tool 13
Foreword
Appendix A of this standard is an informative annex.
The standard proposed by China Machinery Industry Federation.
This standard by the national feed machinery Standardization Technical Committee (SAC/TC384) centralized.
This standard was drafted. Jiangsu Shepherd Group Limited.
The main drafters of this standard. Wang, Sunxu Qing, Liu Chunbin, Fan Wenhai, Wang Yuan Ming, Zhang Wenliang, Sun Weidong, Pingqiu Lan, Wang Mei-ling,
Niyong Dong.
With crossflow pellet feed dryer
1 Scope
This standard specifies the terms and definitions with crossflow pellet feed dryers, models, requirements, test methods, inspection rules, marks, packages
Equipment, transportation and storage.
This standard applies to a steam-heated hot air as the drying medium with crossflow dryer pellets (hereinafter referred to as a dryer).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 3768-1996 Determination of sound pressure of sound power levels of noise sources using an enveloping surface reflectance measuring surface Easy
Law (eqv ISO 3746.1995)
GB 4053.3 fixed ladders and platforms - Safety requirements - Part 3. Industrial guardrails and steel platform
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements (GB 5226.1-2008,
IEC 60204-1.2005, Safety of machinery-Electrical equipment of machines-Part 1. General
requirements, IDT)
Determination of moisture and other volatile matter content GB/T 6435 feed (GB/T 6435-2006, ISO 6496.1999,
Animalfeedingstuffs-Determinationofmoistureandothervolatilematercontent, IDT)
GB/T 14095 agricultural drying technology terms
GB/T 16157 stationary source emission of particulates and gaseous pollution measurement sampling method
GB 17888.4 Safety of machinery stationary facilities - Part 4. Fixed ladders (GB 17888.4-2008,
ISO 14122-4.2004, IDT)
GB 23821 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs (GB 23821-2009, ISO 13857.2008,
IDT)
GB Z/T 192.1 Determination of dust in the air of workplace Part 1. The total dust concentration
2007 cut test Paints and varnishes. ISO 2409
3 Terms and Definitions
GB/T 14095 and established the following terms and definitions apply to this standard.
3.1
With crossflow feed pellet dryer beltcrossflowpeletfeeddryer
Steam heat exchanger hot air as the drying medium, perpendicular to the hot air evenly distributed on the belt of pellet feed flow direction
To feed through the layer, and wet and feed drying equipment, heat exchange occurs.
3.2
Drying volume dryingcubage
Drying wet heat exchange chamber (excluding the built-in duct) inside the volume, including medium and feed into the drying with heat exchange function
Inlet and discharge sections, back to the material inside the volume segment.
|