|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25155-2010: Daylight press
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25155-2010 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Daylight press
| Valid |
GB/T 25155-2010
|
PDF similar to GB/T 25155-2010
Basic data | Standard ID | GB/T 25155-2010 (GB/T25155-2010) | | Description (Translated English) | Daylight press | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G95 | | Classification of International Standard | 71.120; 83.200 | | Word Count Estimation | 6,643 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2012-01-01 | | Quoted Standard | GB/T 191; GB/T 321-2005; GB/T 1184-1996; GB/T 3766; GB/T 12783; GB/T 13306; GB/T 13384; GB 25432-2010; HG/T 3120; HG/T 3228; HG/T 3229; JB/T 5995 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the flat vulcanizing machine model and the basic parameters, technical requirements, safety requirements, tests, inspection rules, signs, packaging, transport and storage. This standard applies to molded rubber products, tape (pull) pull flat vulcanizing machine. This standard does not apply to laboratory vulcanizing machine. | GB/T 25155-2010: Daylight press---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Daylight press
ICS 71.120; 83.200
G95
National Standards of People's Republic of China
Flat vulcanizing machine
2010-09-26 release
2012-01-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Foreword
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard by the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71) centralized.
This standard is responsible for drafting units. Yiyang Rubber & Plastic Machinery Group Co., Ltd., Huzhou Orient Machinery Co., Ltd.
This standard participates in the drafting unit. Ningbo Qianpu Machinery Manufacturing Co., Ltd., Yuyao Huatai Rubber & Plastic Machinery Co., Ltd., Dalian Rubber & Plastic Machine
Machinery Co., Ltd., Fujian China Rubber Automation Technology Co., Ltd.
The main drafters of this standard. Xu Ji, Deng Yina, Li Jisheng, Wang Lianming.
This standard participates in the drafters. Hong Jun, Yang Yafeng, He Ping, Sun Luxi.
Flat vulcanizing machine
1 Scope
This standard specifies the type and basic parameters of the flat vulcanizing machine, technical requirements, safety requirements, test, inspection rules, signs, packaging, transport
Lose and store.
This standard applies to molded rubber and plastic products, tape (plate) flat vulcanizing machine.
This standard does not apply to laboratory flat vulcanizing presses.
2 normative reference documents
The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all
(Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard
Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard.
GB/T 191 Packaging and Storage Icons (GB/T 191-2008, ISO 780..1997, MOD)
GB/T 321-2005 Number of priority and priority (ISO 3. 1973, IDT)
GB/T 1184-1996 Shape and position tolerances Not included Tolerance values (eqvISO 2768-2. 1989)
GB/T 3766 General technical requirements for hydraulic systems (GB/T 3766-2001, eqvISO 4413..1998)
GB/T 12783 Rubber and plastics machinery product model preparation method
GB/T 13306 signs
General specification for packaging of electromechanical products GB/T 13384
GB 25432-2010 Safety requirements for flat vulcanizing presses (EN289..2004, MOD)
General technical conditions for the appearance of rubber and plastic machinery for HG/T 3120
General technical requirements for rubber painting of rubber and plastics
Inspection method of HG/T 3229 flat vulcanizing press
JB/T 5995 mechanical and electrical products operating instructions written regulations
3 models and basic parameters
3.1 Model
Table vulcanizing machine model should be consistent with the provisions of GB/T 12783.
3.2 basic parameters
3.2.1 Nominal clamping force (MN) should be preferred in GB/T 321-2005 in the R10 number system.
3.2.2 hot plate specifications (width mm × length mm) should be preferred GB/T 321-2005 in the R40 number system.
3.2.3 hot plate spacing (mm) should be preferred GB/T 321-2005 in the R20 number system.
4 technical requirements
4.1 Flat vulcanizing machines shall comply with the requirements of this standard and shall be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures.
4.2 Hydraulic system should meet the following requirements.
4.2.1 The hydraulic system shall comply with the provisions of GB/T 3766.
4.2.2 When the working fluid reaches the working pressure, the pressure of 1h, the hydraulic system pressure drop.
--- clamping force greater than 2.5MN flat vulcanizing machine, the pressure drop should not be greater than 10% of the working pressure;
--- clamping force of not more than 2.5MN flat vulcanizing machine, the pressure drop should not be greater than 15% of the working pressure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25155-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25155-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25155-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25155-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|