|
US$419.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23914.2-2009: Load restraint assemblies on road vehicles -- Safety -- Part 2: Web lashing assembly made from synthetic fibres
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23914.2-2009 | English | 419 |
Add to Cart
|
3 days [Need to translate]
|
Load restraint assemblies on road vehicles -- Safety -- Part 2: Web lashing assembly made from synthetic fibres
| Valid |
GB/T 23914.2-2009
|
PDF similar to GB/T 23914.2-2009
Basic data | Standard ID | GB/T 23914.2-2009 (GB/T23914.2-2009) | | Description (Translated English) | Load restraint assemblies on road vehicles -- Safety -- Part 2: Web lashing assembly made from synthetic fibres | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | R12 | | Classification of International Standard | 03.220.20; 59.100.30 | | Word Count Estimation | 18,197 | | Date of Issue | 2009-06-04 | | Date of Implementation | 2010-01-01 | | Quoted Standard | GB/T 251-2008; GB/T 3820; GB/T 4146; GB/T 6461-2002; GB/T 10125-1997; GB/T 16825.1; GB/T 16856.1; EN 12195-1-1995 | | Adopted Standard | EN 12195-2-2001, MOD | | Regulation (derived from) | PRC National Standard Approval Announcement 2009 No.7 (Total No.147) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the risks tight band assembly (hereinafter referred to tighten the belt) synthetic cork tips, requirements, test report, , test methods and inspection rules identity, packaging, transport and storage. Maximum operating force of the provisions of section 500 N manual tensioning device. The load applied to the bolt tight, owned and tie securely fastened. This section does not apply to the lifting of synthetic fibers tighten the belt. | GB/T 23914.2-2009: Load restraint assemblies on road vehicles -- Safety -- Part 2: Web lashing assembly made from synthetic fibres
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Load restraint assemblies on road vehicles.Safety.Part 2. Web lashing assembly made from synthetic fibres
ICS 03.220.20; 59.100.30
R12
National Standards of People's Republic of China
Road vehicles load fixing device security
Part 2. Synthetic belt tightening bolt assembly
Posted 2009-06-04
2010-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 23914 "Load restraint assemblies on road vehicles safety" is divided into four parts.
--- Part 1. Calculation bolt tightening force;
--- Part 2. Synthetic belt tightening bolt assembly;
--- Part 3. bundle chain;
--- Part 4. Bundle rope.
This section GB/T 23914 Part 2.
The partial modification using EN12195-2.2001 "Load restraint assemblies on road safety - Part 2 on the vehicle. synthetic fibers
Tighten the belt "(in English).
This section according to EN12195-2.2001 redrafted. To facilitate comparison, listed in Appendix A of this part of the reg number and
Reg number Control List 2001. EN12195-2.
This part uses EN12195-2.2001 when modified, these technical differences identified in a single vertical line which they are involved
Terms of the margin. In Appendix B gives a list of the technical differences and the reasons for the reference.
For ease of use, this section also made the following editorial changes.
a) "The European Standard" be replaced by "this section";
b) use a decimal point instead of a decimal comma ",". ",";
c) Remove EN12195-2.2001 foreword and introduction, in accordance with the requirements of the standard to add a new preface.
Appendix C of this part of normative appendices, Appendix A and Appendix B is an informative annex.
This part is proposed by the Ministry of Transport of the People's Republic of China.
This part of the jurisdiction of the People's Republic of China Ministry of Transportation Highway Division.
This section drafted by. Juli Rigging Co., Ltd., the Ministry of Communications Highway Research Institute, Zhejiang Jiang Shuangyou Logistics Equipment Co. Shares
the company.
The main drafters of this section. Yang Jianguo, Zhang Xueli, Liyan Ying, Zhangwan Ming, Ting tree, Chen Weidong, Dong Jinsong, Liu Zhiguo.
Road vehicles load fixing device security
Part 2. Synthetic belt tightening bolt assembly
1 Scope
This section GB/T 23914 specifies the risk of belt tightening assembly (hereinafter referred to as bolted band) synthetic cork tips, requirements, test side
Method and inspection rules, test reports, labeling, packaging, transportation and storage.
Maximum operating force specified in this manual 500N tensioning devices for the load of the bolted, tied up and securely fastened.
This section does not apply to synthetic fiber lifting belt tightening bolt.
2 Normative references
The following documents contain provisions which, through reference GB/T 23914 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 251-2008 Textiles Tests for color fastness Grey scale for assessing staining card (ISO 105-A03.1993, IDT)
GB/T 3820 Textiles and textile products - Determination of thickness (GB/T 3820-1997, eqv ISO 5084.1996)
GB/T 4146 Textile terms (chemical fibers)
GB/T 6461-2002 metal base metal and other inorganic coatings by etching after the test specimens and ratings
(ISO 10289.1999, IDT)
GB/T 10125-1997 artificial atmosphere corrosion tests and salt spray test (eqv ISO 9227.1990)
Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
Associate (GB/T 16825.1-2008, ISO 7500-1.2004, IDT)
GB/T 16856.1 Safety of machinery - Risk assessment - Part 1. Principles (GB/T 16856.1-2008, ISO 14121-1.
2007, IDT)
EN12195-1. load fixing device security - Part 11995 road vehicles. Calculation of forces in bolted
3 Terms and Definitions
GB/T 4146 and established the following terms and definitions apply to this section.
3.1
A tool for fixing cargo by pulling or tensioning device holding means and the flat ribbon with or without end fittings components. (See Figure 1)
3.2
As support for traditional or shuttleless weaving band, typically multilayer fabric.
3.3
In the load fixing device, producing and maintaining mechanical tension device (main device such as. ratchet, gallows, pull grip (see Figure 2C1 ~
C5). Tensioning device Schematic See Figure 4.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23914.2-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23914.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 23914.2-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23914.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|