|
US$874.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21411.2-2009: Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21411.2-2009 | English | 874 |
Add to Cart
|
5 days [Need to translate]
|
Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems
| Valid |
GB/T 21411.2-2009
|
PDF similar to GB/T 21411.2-2009
Basic data | Standard ID | GB/T 21411.2-2009 (GB/T21411.2-2009) | | Description (Translated English) | Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 44,428 | | Date of Issue | 2009-04-02 | | Date of Implementation | 2010-01-01 | | Quoted Standard | GB/T 230.1; GB/T 231.1; GB/T 2828.1; GB/T 3452.1; GB/T 2452.2; GB/T 4340.1; GB/T 9445; GB/T 19000; GB/T 20972 (all); ISO 2859-2; ASTM A370; ASTM D1415; ASTM D2240; ASTM E140; MIL-STD 105E | | Adopted Standard | ISO 15136-2-2006, MOD | | Regulation (derived from) | National Standard Approval Announcement 2009 No.4 (Total No.144) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the design of the ground screw driving device, design verification and effectiveness, manufacturing and data control, performance evaluation and repair. This section applies to the ground drives meet the definition of the product. Meanwhile, the appendix offers a choice of braking systems, installation, operations and sucker selection and use of other information. In addition to the overall design, this section does not cover the following: the bottom of the drive system, sucker, rod slips, sealed box, electrical control equipment, instrumentation, external power conversion equipment, auxiliary equipment (such as a belt, pulleys and equipment shields). Other criteria may twist the cap in the content of these devices. | GB/T 21411.2-2009: Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Downhole equipment for petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 2. Surface-drive systems
ICS 75.180.10
E92
National Standards of People's Republic of China
Downhole oil and gas industry equipment
Artificial lift system with a screw
Part 2. Ground drive
(ISO 15136-2.2006, Petroleumandnaturalgasindustries-
Part 2. Surface-drivesystems, MOD)
Posted 2009-04-02 2010-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Abbreviations 5
5 5 Performance Specifications
6 Technical Specifications 6
Suppliers claim 9 7
8 Maintenance 12
9 ready for shipment 13
Applications 13 10 Change
Appendix A (informative) Equipment Selection Guide 14
Annex B (informative) User Survey Table 15
Annex C (informative) Evaluation of the brake system 17
Annex D (informative) applied to the screw rod selection and use 27
Annex E (informative) Guide 31
Annex F (informative) Installation Guide 33
Annex G (normative) rubber and non-metallic materials requirements 35
Appendix H (informative) braking systems Test Method 37
References 39
Foreword
GB/T 21411 "oil and gas industry equipment downhole artificial lift with screw system" is divided into two parts.
--- Part 1. Pumps;
--- Part 2. Ground drive.
This section GB/T 21411 Part 2.
The partial modification using ISO 15136-2.2006 "oil and gas industry with a screw pump artificial lift systems - Part 2. Ground drive
Dynamic Systems "(in English).
This portion of the ISO 15136-2.2006 technical differences are as follows.
--- Remove 7.3e) "maximum operating torque";
--- The 7.3f) in "maximum input power" to "power rating";
--- For other international standards cited in this section has been modified or is equivalent to our standard referenced in this section of this
These national standards instead of the corresponding international standards (see Part 2 of this chapter).
For ease of use, this section made the following editorial changes.
"." --- With a decimal point instead of a comma as the decimal point, "";
--- The ISO 15136-2.2006 standard original name of "oil and gas industry" to "oil and gas industry downhole equipment";
--- "ISO 15136 in this section" to "this Part";
--- Original standard Appendix E to this part of Annex A;
--- Original Standard Appendix F to this part of the appendix B;
--- Original criteria in Appendix B to this part of Annex C;
--- Original standard Appendix H to this part of the Annex D;
--- Original criteria in Appendix D to this part of Annex E;
--- Original standard Appendix C to this part of the appendix F;
--- Original criteria in Appendix A to this part of Annex G;
--- Original standard Appendix G to this part of the appendix H;
--- Remove the cover of the international standard, PDF statement, preface and introduction.
Appendix G to this part of the normative appendix, Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix F, Appendix H for information only
appendix.
This part of the National Oil Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96) and focal points.
This section is responsible for drafting the Beijing Petroleum Machinery Factory, Daqing Oilfield Company Limited Production Engineering Research Institute, Daqing Oilfield force have God Pump
Limited companies participated in the drafting.
The main drafters of this section. Wangxing Yan, CHEN Xiao-jun, Fanyu Zhao, Cao Gang, Deng Hui.
Downhole oil and gas industry equipment
Artificial lift system with a screw
Part 2. Ground drive
1 Scope
This part of the design of the ground screw driving means oil and gas industry uses, design verification and effectiveness, manufacturing and control data
System, performance evaluation and other aspects of the maintenance requirements. This section applies to the ground to meet the driving means defined product. Meanwhile, appendix provides
Selection, installation, operation and rod selection and use of information braking systems.
In addition to the overall design, this section does not cover the following. the bottom of the drive system, rod, rod slips, sealed boxes, electronic control equipment, instrumentation,
External power conversion equipment, auxiliary equipment (such as belts, pulleys and apparatus shroud). Other standards in might overwrite the contents of these devices.
2 Normative references
The following documents contain provisions which, through reference GB/T 21411 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 230.1 Metallic Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scale)
(GB/T 230.1-2004, ISO 6508-1.1999, MOD)
GB/T 231.1 Brinell hardness test - Part 1. Test method (GB/T 231.1-2002, eqvISO 6506-1.
1999)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 3452.1 hydraulic and pneumatic rubber O-ring Part 1. Dimensions, tolerances (GB/T 3452.1-2005,
ISO 3601-1.2002, MOD)
GB/T 3452.2 hydraulic and pneumatic rubber O-ring Part 2. appearance quality inspection standard (GB/T 3452.2-
2007, ISO 3601-3.2005, IDT)
GB/T 4340.1 Vickers hardness test - Part 1. Test method (GB/T 4340.1-1999, eqvISO 6507-1.
1997)
GB/T 9445 NDT personnel qualification and certification (GB/T 9445-2008, ISO 9712.2005, IDT)
GB/T 19000 Quality management systems - Fundamentals and vocabulary (GB/T 19000-2008, ISO 9000.2005, IDT)
GB/T 20972 (all parts) oil and gas exploration in the oil and gas industry for hydrogen sulfide containing material environment [ISO 15156 (the
Part), IDT]
ISO 2859-2 Sampling procedures for inspection - Part 2. Batch test for isolated by limiting quality (LQ) retrieves sampling plan
ASTMA370 steel products, mechanical tests Standard Test Methods and Definitions
ASTMD1415 Standard Test Method for Rubber Property - International Hardness
Standard Test Method for Rubber Property ASTMD2240 Shore hardness
ASTME140 metal standard hardness conversion table (Brinell hardness, Vickers hardness, Rockwell hardness, surface hardness, Knoop hardness and Shore hard
The relationship between the degree)
MIL-STD-105E Sampling procedures and tables
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21411.2-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 21411.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21411.2-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21411.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|