Path:
Home >
GB/T >
Page601 > GB/T 20864-2021
Home >
Standard_List >
GB/T >
Page601 > GB/T 20864-2021
GB/T 20864: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20864-2021 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Rice transplanter - Specification
| Valid |
GB/T 20864-2021
|
| GB/T 20864-2007 | English | 158 |
Add to Cart
|
1 days [Need to translate]
|
Rice transplanter -- Specification
| Obsolete |
GB/T 20864-2007
|
PDF similar to GB/T 20864-2021
Basic data
| Standard ID | GB/T 20864-2021 (GB/T20864-2021) |
| Description (Translated English) | Rice transplanter - Specification |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | B91 |
| Word Count Estimation | 10,177 |
| Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 20864-2021: Rice transplanter - Specification
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rice transplanter -- Specification
ICS 65:060:30
CCSB91
National Standards of People's Republic of China
Replacing GB/T 20864-2007
Technical specification for rice transplanter
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document replaces GB/T 20864-2007 "Technical Conditions for Rice Transplanters": Compared with GB/T 20864-2007, except for structural adjustment
In addition to the adjustment and editorial changes, the main technical changes are as follows:
a) Added terms (see 3:6~3:10);
b) Some technical performance indicators of the original standard have been changed (see Table 1, Table 1 of the:2007 edition);
c) Added the performance index of straightness accuracy and the accuracy of connecting row spacing of the automatic assisted driving system of the rice transplanter (see Table 1);
d) Added the technical indicators of simultaneous deep fertilization for transplanting rice (see Table 2 and Table 3);
e) Added the operation fuel consumption index (see 4:1:5);
f) The requirements for handling performance and symbols are added (see 4:3:4);
g) Added requirements for monitoring sensors, digital instruments, and lighting (see 4:3:5);
h) Added the automatic navigation requirements for the automatic assisted driving system of the rice transplanter (see 4:3:6 and 4:3:7);
i) Added safety requirements for rice transplanters with automatic assisted driving systems (see 4:4:3 and 4:4:4);
j) Added parking safety requirements (see 4:4:7);
k) The requirements for the position and direction of the engine exhaust port have been added (see 4:4:8);
l) Added safety requirements for fertilization devices and fertilizer boxes (see 4:4:9);
m) Added the technical requirements for the gearbox (see 4:5:1);
n) Added technical requirements for the hydraulic system of the rice transplanter (see 4:5:4);
o) Added technical requirements for the electrical system of the rice transplanter (see 4:5:5);
p) Added the system requirements for automatic monitoring of transplanting performance and automatic control of planting depth (see 4:6:9);
q) The test method for simultaneous side deep fertilization has been added (see 5:1:3);
r) The test methods for the straightness accuracy and the connecting line spacing accuracy of the automatic assisted driving system are added (see 5:1:4, 5:1:5);
s) Added the classification of unqualified items (see Table 4);
t) The sampling judgment scheme has been added (see Table 5);
u) Delete the manufacturing details requirements (see 4:5:6~4:5:8 of the:2007 edition):
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201):
This document is drafted by: Suzhou Jiufu Agricultural Machinery Co:, Ltd:, Kubota Agricultural Machinery (Suzhou) Co:, Ltd:, Zhejiang Xinglai and Agriculture
Equipment Co:, Ltd:, China Academy of Agricultural Mechanization, Zhejiang University of Science and Technology:
The main drafters of this document: Xu Zhenghua, Li Xiaojun, Li Bojun, Yang Zhaowen, Lu Shusheng, Wang Qibing:
The previous versions of the documents replaced by this document are as follows:
---First published in:2007 as GB/T 20864-2007;
---This is the first revision:
Technical specification for rice transplanter
1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of rice transplanters:
This document applies to the quality evaluation of rice transplanters (hereinafter referred to as rice transplanters):
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 2828:1 Counting Sampling Inspection Procedure Part 1: Lot-by-Lot Inspection Sampling Plan Retrieved by Acceptance Quality Limit (AQL)
GB/T 3098:1 Mechanical properties of fasteners Bolts, screws and studs
GB/T 3098:2 Fasteners Mechanical Properties Nuts
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB/T 4269:1 Agricultural and forestry tractors and machinery, lawn and garden power machinery operator control mechanism and other display device symbols
No: Part 1: Common Symbols
GB/T 4269:2 Agricultural and forestry tractors and machinery, lawn and garden power machinery operator control mechanism and other display devices
Part 2: Symbols for agricultural tractors and machinery
GB/T 6243-2017 Test method for rice transplanter
GB/T 9480 Agricultural and Forestry Tractors and Machinery, Lawn and Gardening Power Machinery Operating Instructions Compilation Rules
GB 10395:1-2009 Agricultural and Forestry Machinery Safety Part 1: General Provisions
GB 10395:9 Agricultural and Forestry Machinery Safety Part 9: Seeding Machinery
GB 10396 Agricultural and Forestry Tractors and Machinery, Lawn and Garden Power Machinery Safety Signs and Hazard Graphics General
GB/T 13306 Signs
GB 19517 National Electrical Equipment Safety Technical Specification
GB/T 29004 Fuel consumption index and measurement method of rice transplanter
JB/T 5673 General technical conditions for painting of agricultural and forestry tractors and implements
JB/T 6268-2015 Determination method for noise of self-propelled harvesting machinery
JB/T 8574 Agricultural Machinery Product Model Compilation Rules
JB/T 9832:2 Determination method of paint film adhesion performance of agricultural and forestry tractors and implements Press cutting method
JB/T 13855-2020 Simultaneous side deep fertilizer applicator for rice transplanting
NY/T 3334-2018 Technical Specification for Quality Evaluation of Agricultural Machinery Automatic Navigation Assisted Driving System
3 Terms and Definitions
The following terms and definitions apply to this document:
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB/T 20864-2021_English be delivered?
Answer: Upon your order, we will start to translate GB/T 20864-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB/T 20864-2021_English with my colleagues?
Answer: Yes. The purchased PDF of GB/T 20864-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version GB/T 20864-2021?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20864-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.