Search result: GB/T 40006.11-2024
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40006.11-2024 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Plastics - Recycled Plastics - Part 11: Polyvinyl chloride(PVC)materials
| Valid |
GB/T 40006.11-2024
|
| Standard ID | GB/T 40006.11-2024 (GB/T40006.11-2024) | | Description (Translated English) | Plastics - Recycled Plastics - Part 11: Polyvinyl chloride(PVC)materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G32 | | Classification of International Standard | 83.080.20 | | Word Count Estimation | 18,134 | | Date of Issue | 2024-09-29 | | Date of Implementation | 2025-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 40006.11-2024
Plastics Recycled Plastics Part 11.
Polyvinyl chloride (PVC) material
ICS 83.080.20
CCS G32
National Standard of the People's Republic of China
Released on 2024-09-29
2025-04-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface ... Ⅲ
Introduction ... Ⅳ
1 Scope ... 1
2 Normative references ... 1
3 Terms and Definitions ... 1
4 Classification and naming ... 2
5 Requirements ... 2
6 Test methods ... 4
7 Inspection Rules ... 7
8 Logo and accompanying documents ... 8
9 Packaging, transportation and storage ... 8
Appendix A (Informative) Typical Transmission Infrared Spectrum of Polyvinyl Chloride ... 10
Appendix B (Informative) Additional properties of recycled polyvinyl chloride plastics ... 12
References ... 13
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting is required.
This document is Part 11 of GB/T 40006 "Plastics Recycled Plastics". GB/T 40006 has been published in the following parts.
Part 1.General;-
Part 2.Polyethylene (PE) materials; -
Part 3.Polypropylene (PP) materials; -
Part 5.Acrylonitrile﹘Butadiene﹘Styrene (ABS) materials; -
Part 6.Polystyrene (PS) and high-impact polystyrene (PS﹘I) materials; -
Part 7.Polycarbonate (PC) materials; -
Part 8.Polyamide (PA) materials; -
Part 9.Polyethylene terephthalate (PET) materials; -
Part 11.Polyvinyl chloride (PVC) materials. -
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Technical Committee on Plastics Standardization (SAC/TC 15).
This document was drafted by. Anhui Guanhong Plastics Co., Ltd., Guangzhou Quality Supervision and Inspection Institute, Guangzhou Customs Technical Center, Beijing Hua
Suchenguang Technology Co., Ltd., Zhonglanchenguang Chengdu Testing Technology Co., Ltd., Hangzhou Zhongwang Technology Co., Ltd., Ningbo Customs Technology Center
Center, Qilu Branch of Sinopec, National Quality Supervision and Inspection Center for Recycled Nonferrous Metals, Rubber and Plastic Materials (Anhui),
Zhongshan Quality and Metrology Supervision and Inspection Institute of Guangdong Province, Suzhou Runjia Polymer Materials Co., Ltd., Beijing Yanshan Petrochemical High-tech Technology Co., Ltd.
China National Petroleum Corporation Petrochemical Research Institute, Tonggui Technology Chengdu Co., Ltd., Beijing Academy of Science and Technology Branch
Analysis and Testing Institute (Beijing Physical and Chemical Analysis and Testing Center), Shenzhen Jiemite Technology Co., Ltd., Jiangsu Jinfa Recycling Resources Co., Ltd.
Company, South China University of Technology, Jinda Technology Co., Ltd., Guangzhou Weigang Environmental Protection Technology Co., Ltd., Qingdao University of Technology, Beijing Petroleum
College of Chemical Engineering, Chengde Jinjian Testing Instrument Co., Ltd., Shenzhen Xinguan Precision Technology Co., Ltd., Zhejiang Fuhua New Materials Technology Co., Ltd.
Co., Ltd., Ganzhou Sui Lian Engineering Plastics Co., Ltd., Nantong Bulgari New Materials Co., Ltd., and Chongqing Hengweilin Auto Parts Co., Ltd.
The main drafters of this document are. Ding Peng, Shen Hui, Xie Jianling, He Guoshan, Wang Wanjuan, Li Dan, Xie Peng, Luo Chuan, Chen Minjian,
Zheng Huiqin, Zhu Ansheng, Zhang Xueming, Tan Botao, Zhang Yanjun, Zhou Lei, Wang Liwen, Wang Yaling, Wang Li, Wang Jun, Zhao Jing, Cui Peng,
Chen Jianping, Cheng Jie, He Hui, Chen Hongyuan, Li Xiaomeng, Li Kaiyan, Zhang Qingjian, Dai Yuhua, Wu Yonggang, Zhang Xinhua, Li Xiaozeng,
Bao Kewei, He Chong, Wang Jiamin, Xiong Dongyi, Wang Lei, Shi Yingjie, Ren Yufeng, Wang Chen, Wang Ruping, Ling Lexu, Cui Quanqing, Yan Zelin.
introduction
The plastics industry is an important pillar industry of the national economy. With the rapid development of my country's plastics industry and the extensive use of plastic products, the plastics
Recycling and reuse is an important issue facing the industry. It is one of the ways to achieve sustainable development of plastics and also a way to solve the problem of "white pollution".
It provides an effective way to solve environmental problems such as
In 2021, in order to meet the urgent needs of the industry and further alleviate the current situation of no unified and systematic product standards in the field of plastic recycling in my country, a new standard for plastic recycling will be formulated.
The GB/T 40006 series of national standards for recycled plastics was released. This series of national standards is divided into the following categories based on the characteristics of plastic materials.
12 parts. Part 1 provides general rules for the naming, terminology, odor level, content of restricted substances, radioactivity, etc. of recycled plastics.
In addition to the common requirements in the general rules, the rest of the standards specify the requirements for recycled plastic products based on the type of plastic.
GB/T 40006 "Plastics - Recycled Plastics" is intended to consist of the following 12 parts.
Part 1.General. The purpose is to unify the general requirements of this series of products and facilitate reference in other parts.
Part 2.Polyethylene (PE) materials. The purpose is to establish product requirements applicable to recycled PE materials to meet industry needs. -
Part 3.Polypropylene (PP) materials. The purpose is to establish product requirements applicable to recycled PP materials to meet industry needs. -
Part 4.Polyolefin blends. The purpose is to establish product requirements applicable to recycled polyolefin blends to meet
Industry demand.
Part 5.Acrylonitrile-butadiene-styrene (ABS) materials. The purpose is to establish product requirements for recycled ABS materials.
To meet the needs of the industry.
Part 6.Polystyrene (PS) and high-impact polystyrene (PS﹘I) materials. The purpose is to establish the requirements for recycled PS and
The product requirements of PS﹘I materials meet the needs of the industry.
Part 7.Polycarbonate (PC) materials. The purpose is to establish product requirements applicable to recycled PC materials to meet the industry
need.
Part 8.Polyamide (PA) materials. The purpose is to establish product requirements applicable to recycled PA materials to meet the industry
need.
Part 9.Polyethylene terephthalate (PET) materials. The purpose is to establish product requirements applicable to recycled PET materials.
To meet the needs of the industry.
Part 10.Polybutylene terephthalate (PBT) materials. The purpose is to establish product requirements applicable to recycled PBT materials.
To meet the needs of the industry.
Part 11.Polyvinyl chloride (PVC) materials. The purpose is to establish product requirements applicable to recycled PVC materials to meet the industry
need.
Part 12.Polymethyl methacrylate (PMMA) materials. The purpose is to establish products suitable for recycled PMMA materials.
Requirements to meet industry needs.
This document is the 11th part of the series of standards. This document specifies the characteristics of polyvinyl chloride (PVC) materials and the requirements for the recycling of polyvinyl chloride.
When specifying these performance requirements, both the standard requirements of virgin PVC materials and the requirements of recycled PVC are taken into consideration.
Properties of vinyl materials.
Plastics Recycled Plastics Part 11.
Polyvinyl chloride (PVC) material
1 Scope
This document specifies the classification and naming, requirements, test methods, inspection rules, marking and accompanying materials of polyvinyl chloride (PVC) recycled plastics.
Documentation, packaging, transportation and storage.
This document is applicable to the recycling of unplasticized polyvinyl chloride powder obtained by classification, screening and crushing of waste polyvinyl chloride plastics.
Plastics [PVC﹘U（REC）], and granular plasticized polyvinyl chloride made by classification, screening, crushing, melt extrusion granulation and other processes
Recycled plastic [PVC﹘P(REC)].
This document does not apply to polyvinyl chloride recycled plastics from hazardous waste such as medical waste, pesticide packaging, and radioactive waste.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies.
in this document.
GB/T 1033.1 Plastics - Determination of density of non-cellular plastics - Part 1.Immersion method, liquid pycnometer method and titration method
GB/T 1040.2-2022 Determination of tensile properties of plastics Part 2.Test conditions for molded and extruded plastics
GB/T 1633 Determination of Vicat softening temperature (VST) of thermoplastics
GB/T 1636 Plastics Determination of apparent density of materials that can flow out of a specified funnel
GB/T 2035 Plastics Terminology
GB/T 2411 Plastics and hard rubber - Determination of indentation hardness (Shore hardness) using a durometer
GB/T 2547 Plastics Sampling Method
GB/T 2914-2008 Determination of volatile matter (including water) of homopolymer and copolymer resins of plastics vinyl chloride
GB/T 2918 Standard environment for conditioning and testing of plastic specimens
GB/T 8170 Rules for rounding off values and expression and determination of limit values
GB/T 9345.5 Determination of ash content in plastics Part 5.Polyvinyl chloride
GB/T 9352 Compression molding of thermoplastic material specimens
GB/T 21060 Determination of fluidity of plastics
GB/T 30102 Plastics Guidelines for the recovery and recycling of plastic waste
GB/T 35262-2017 Characterization and detection methods of polyvinyl chloride (PVC) plastic recycled materials
GB/T 37426-2019 Plastic specimens
GB/T 39812 Machining preparation of plastic specimens
GB/T 40006.1-2021 Plastics Recycled Plastics Part 1.General
SH/T 1541.1 Test method for appearance of plastic particles Part 1.Visual inspection
3 Terms and definitions
The terms and definitions defined in GB/T 40006.1-2021, GB/T 2035 and GB/T 30102 and the following apply to this document.
......
|