|
US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19520.13-2009: Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-102: Injector/extractor handle
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19520.13-2009 | English | 214 |
Add to Cart
|
3 days [Need to translate]
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-102: Injector/extractor handle
| Valid |
GB/T 19520.13-2009
|
PDF similar to GB/T 19520.13-2009
Basic data | Standard ID | GB/T 19520.13-2009 (GB/T19520.13-2009) | | Description (Translated English) | Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-102: Injector/extractor handle | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K05 | | Classification of International Standard | 31.240 | | Word Count Estimation | 11,150 | | Date of Issue | 2009-03-19 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 19520.4-2004; GB/T 19520.6-2004 | | Quoted Standard | GB/T 19290.1-2003; GB/T 19520.12 | | Adopted Standard | IEC 60297-3-102-2004, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 3, 2009 (No. 143 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies subracks and plug-in plug for use with additional interface device dimensions. This section also be used with GB/T 19520. 14 together in combination. | GB/T 19520.13-2009: Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-102: Injector/extractor handle
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm (19 in) series Part 3-102. Injector/extractor handle
ICS 31.240
K05
National Standards of People's Republic of China
GB/T 19520.13-2009/IEC 60297-3-102.2004
Replacing GB/T 19520.6-2004, partially replace GB/T 19520.4-2004
Electronic equipment mechanical structures
Part 3-102. puller handle
(IEC 60297-3-102.2004, IDT)
Posted 2009-03-19 2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 panel mount plug type A handle arrangement 1 Overview
5 Panel Mount Type A plug handle plug box Connection size 2
6 Panel Mount Type A plug handle plugin interface Size 3
7 PCB Mounting B-type plug handle arrangement overview 3
8 PCB Mounting B-type plug handle plug box Connection size 4
9 PCB Mounting B-type plug handle plug connection size 5
Figure 10 used in the size 5
1 new and old GB/T 19520 (IEC 60297) series of standards in relation Ⅲ
Figure 2 panel mount plug type A handle arrangement 1 Overview
Figure 3 Panel Mount Type A plug is inserted box connection size 2
Figure 4 Panel Mount Type A plug handle plugin interface Size 3
5 PCB Mounting B-type plug handle arrangement Overview 4
6 PCB Mounting B-type plug handle plug box Connection size 4
Figure 7 PCB Mounting B-type plug handle plug connection size 5
Table 1 port plug box box size 2
GB/T 19520.13-2009/IEC 60297-3-102.2004
Foreword
GB/T 19520 "Electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size" is divided into the following six sections.
--- Part 1. Panels and racks;
--- Part 2. racks and cabinets from the grid structure;
--- Part 12. Subracks and associated plug;
--- Part 13. puller handle;
--- Part 14. Keying and alignment;
--- Part 15. Based on the connector plug and plug the interface box dimension.
This section GB/T Part of 1,319,520.
This section identical with IEC 60297-3-102.2004 "electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size
Part 3-102. puller handle "(in English).
This section is equivalent translation IEC 60297-3-102.2004.
For ease of use, this section made the following editorial changes.
a) "This standard" be replaced by "this section";
b) Remove the preface to the international standards;
c) the decimal point, "" to. "."
This Part replaces GB/T 19520.6-2004 "electronic equipment mechanical structure 482.6mm (19in) series of mechanical dimensions of the primary structure
Part 5-101. Subracks and associated plug puller handle "section instead of GB/T 19520.4-2004" electronic equipment machinery Results
Configuration 482.6mm (19in) series of mechanical structures - Dimensions - Part 4. Subracks and associated plug additional dimension. "
This part of the electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points.
This section is drafted. Huawei Technologies Co., Ltd., the Quartet Electric (Group) Co., Ltd., State Grid Electric Power Research Institute, Guodian Nanjing from
Automation Co., Ltd., ZTE Corporation, Beijing Electrical Machinery Industry Technical and Economic Research Institute.
The main drafters of this section. Zhangming Can, Zhang real, Zhangkai Guo Tian Heng, Zhang Yu, Wu Bei, Wang Wei, Li Jianxia.
This part of the standard replaces the previous release case.
--- GB/T 19520.6-2004, GB/T 19520.4-2004.
Its plug-in (GB/T 19520.12-2009, IEC 60297-3-101.2004, IDT)
3 Terms and Definitions
Terms and definitions GB/T 19290.1 \u200b\u200bestablished in this section apply.
Overview 4 panel mounting arrangement of the type A plug handle
A type plug is characterized in causing the plug-in box with GB/T 19520.12 not compatible, see Figure 2.
Overview Figure 2 panel mounting arrangement of the type A plug handle
GB/T 19520.13-2009/IEC 60297-3-102.2004
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19520.13-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 19520.13-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 19520.13-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19520.13-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|