|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 40815.5-2022
|
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with inch and metric system - Part 5: Cooling performance evaluation for indoor cabinets
|
GB/T 40815.5-2022
|
|
GB/T 19290.7-2021
|
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabine tinterface dimensions for miscellaneous equipm
|
GB/T 19290.7-2021
|
|
GB/T 18663.2-2021
|
(Mechanical structure of electronic equipment "Tests of metric and imperial series" - Part 2: Seismic test of cabinets and racks)
|
GB/T 18663.2-2021
|
|
GB/T 40815.2-2021
|
(Electrical and electronic equipment mechanical structure in line with the thermal management of the imperial series and metric series cabinets - Part 2: The determination method of forced air cooling)
|
GB/T 40815.2-2021
|
|
GB/T 40815.4-2021
|
(Electrical and electronic equipment mechanical structure in line with the thermal management of the inch series and metric series cabinets - Part 4: Cooling performance test of the water supply heat exchanger in the electronic cabinet)
|
GB/T 40815.4-2021
|
|
GB/T 18663.3-2020
|
(Mechanical structure of electronic equipment "Test of metric series and inch series" - Part 3: Electromagnetic shielding performance test of cabinet and subrack)
|
GB/T 18663.3-2020
|
|
GB/T 19520.19-2020
|
(Mechanical structure of electronic equipment 482.6 mm (19 in) series mechanical structure size - Part 3-107: Dimensions of miniaturized plug-in boxes and plug-ins)
|
GB/T 19520.19-2020
|
|
GB/T 19290.6-2018
|
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-4: Sectional specification -- Interface coordination dimensions for the 25 mm equipment practice -- Adaptation dimensions for sub-racks or chassis appl
|
GB/T 19290.6-2018
|
|
GB/T 19520.18-2018
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-106: Adaptation dimensions for sub-racks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
|
GB/T 19520.18-2018
|
|
GB/T 37135-2018
|
Safety requirements for insulated chassis
|
GB/T 37135-2018
|
|
GB/T 37144-2018
|
Cabinets for low-voltage switchgear -- Electrical mechanical structures
|
GB/T 37144-2018
|
|
GB/T 37145-2018
|
Cabinets for low-voltage switchgear -- Mechanical structures for draw out functional unit
|
GB/T 37145-2018
|
|
GB/T 19520.16-2015
|
Mechanical structures for electronic equipment -- Dimension of mechanical structures of the 482.6 mm (19 in) series -- Part 3-100: Basic dimensions of front panels, sub-racks, chassis, racks and cabinets
|
GB/T 19520.16-2015
|
|
GB/T 31839-2015
|
Mechanical structures for electrotechnical and electronic equipment -- Safety requirements and tests
|
GB/T 31839-2015
|
|
GB/T 31841-2015
|
Mechanical structures for electrotechnical and electronic equipment -- Design guide for electromagnetic shielding and ESD protection
|
GB/T 31841-2015
|
|
GB/T 31842-2015
|
Mechanical structures for electrotechnical and electronic equipment -- Guide for design of environmental protection
|
GB/T 31842-2015
|
|
GB/T 31844-2015
|
Cabinets for electrotechnical and electronic equipment -- Hinge
|
GB/T 31844-2015
|
|
GB/T 31845-2015
|
Mechanical structures for electrotechnical and electronic equipment -- Thermal design specification
|
GB/T 31845-2015
|
|
GB/T 31846-2015
|
Cabinets for high-voltage switchgear -- General technical specification
|
GB/T 31846-2015
|
|
GB/T 31847-2015
|
Mechanical structures for electrotechnical and electronic equipment -- Modular order and associated applications
|
GB/T 31847-2015
|
|
GB/T 7267-2015
|
Series of basic dimension of protective and control panels and cabinet for secondary circuit of power system
|
GB/T 7267-2015
|
|
GB/T 7268-2015
|
Series of basic dimensions of sub-racks and associated plug-in units panels for protection and automation equipment of power system
|
GB/T 7268-2015
|
|
GB/T 28564-2012
|
Cabinets for electrotechnical and electronic equipment -- Modular design requirements
|
GB/T 28564-2012
|
|
GB/T 28568-2012
|
Cabinets for electrotechnical and electronic equipment -- Safety design requirements
|
GB/T 28568-2012
|
|
GB/T 28571.1-2012
|
The telecom equipment cabinet -- Part 1: General specification
|
GB/T 28571.1-2012
|
|
GB/T 19520.17-2010
|
Mechanical structures for electronic equipment -- Dimension of mechanical structures of the 482.6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis
|
GB/T 19520.17-2010
|
|
GB/T 25293-2010
|
Mechanical door lock for cabinets of electrotechnical and electronic equipment
|
GB/T 25293-2010
|
|
GB/T 25294-2010
|
General technical requirements for cabinets of synthesized control equipment in electrical power system
|
GB/T 25294-2010
|
|
GB/T 19290.4-2009
|
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-2: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for sub-rack, c
|
GB/T 19290.4-2009
|
|
GB/T 19290.5-2009
|
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-3: Sectional specification -- Interface co-ordination dimensions for the 25mm equipment practice -- Extended detail specification -- Dimensions for sub
|
GB/T 19290.5-2009
|
|
GB/T 19520.12-2009
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-101: Sub-racks and associated plug-in units
|
GB/T 19520.12-2009
|
|
GB/T 19520.13-2009
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-102: Injector/extractor handle
|
GB/T 19520.13-2009
|
|
GB/T 19520.14-2009
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-103: Keying and alignment pin
|
GB/T 19520.14-2009
|
|
GB/T 19520.15-2009
|
Mechanical structures for electronic equipment -- Dimensions of mechanical structures of the 482.6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of sub-racks and plug-in units
|
GB/T 19520.15-2009
|
|
GB/T 23359-2009
|
Frame-type cabinets for low-voltage switchgear
|
GB/T 23359-2009
|
|
GB/T 23360-2009
|
Method of evaluating the thermal performance of enclosures
|
GB/T 23360-2009
|
|
GB/T 18663.1-2008
|
Mechanical structures for electronic equipment tests for IEC 60917 and IEC 60297 -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, sub-racks and chassis
|
GB/T 18663.1-2008
|
|
GB/T 19290.3-2008
|
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an
|
GB/T 19290.3-2008
|
|
GB/T 22690-2008
|
General mechanical structures for data communication equipment -- Cabinet and sub-rack
|
GB/T 22690-2008
|
|
GB/T 22764.1-2008
|
Cabinets for low-voltage switchgear -- Part 1: Generic specification
|
GB/T 22764.1-2008
|
|
GB/T 22764.2-2008
|
Cabinets for low-voltage switchgear -- Part 2: Series of dimensions
|
GB/T 22764.2-2008
|
|
GB/T 22764.3-2008
|
Cabinets for low-voltage switchgear -- Part 3: Environment and climate
|
GB/T 22764.3-2008
|
|
GB/T 22764.4-2008
|
Cabinets for low-voltage switchgear -- Part 4: Electrical safety requirements
|
GB/T 22764.4-2008
|
|
GB/T 22764.5-2008
|
Cabinets for low-voltage switchgear -- Part 5: Basic test methods
|
GB/T 22764.5-2008
|
|
GB/T 7269-2008
|
Arrangement, types and basic dimensions of consoles for electronic equipment
|
GB/T 7269-2008
|
|
GB/T 8582-2008
|
Terminology for mechanical structures of electrotechnical and electronic equipment
|
GB/T 8582-2008
|
|
GB/T 18663.2-2007
|
Mechanical structures for electronic equipment -- Tests for IEC 60917 and IEC 60297 -- Part 2: Seismic tests for cabinets and racks
|
GB/T 18663.2-2007
|
|
GB/T 18663.3-2007
|
Mechanical structures for electronic equipment -- Tests for IEC 60917 and IEC 60297 -- Part 3: Electromagnetic shielding performance tests for cabinets, racks and sub-racks
|
GB/T 18663.3-2007
|
|
GB/T 19520.1-2007
|
Electronic equipment mechanical structure 482. 6mm (19in) series -- Part 1 of the mechanical structure size: Panels and racks
|
GB/T 19520.1-2007
|
|
GB/T 19520.2-2007
|
Grid spacing of the mechanical structure of electronic equipment 482. 6mm (19in) series of mechanical structure dimensions -- Part 2: Cabinets and rack structure
|
GB/T 19520.2-2007
|
|
GB/T 3047.6-2007
|
Series of basic dimensions of cases for electronic equipment
|
GB/T 3047.6-2007
|
|
GB/T 7268-2005
|
The secondary circuit of the power system control and protection devices sub-racks and plug-in panel size
|
GB/T 7268-2005
|
|
GB/T 19520.10-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series -- Part 5-105 of the mechanical structure size: Sub-racks and plug-positioning/ground pin
|
GB/T 19520.10-2004
|
|
GB/T 19520.11-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series -- Part 5-107 of mechanical structure size: Sub-racks and associated plug installed plug-ins
|
GB/T 19520.11-2004
|
|
GB/T 19520.3-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series -- Part 3 of the mechanical structure size: Sub-racks and plug
|
GB/T 19520.3-2004
|
|
GB/T 19520.4-2004
|
Part 4 of the electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size: Sub-racks and plug-in additional dimensions
|
GB/T 19520.4-2004
|
|
GB/T 19520.5-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series of mechanical structure dimensions -- Part 5-100: plug the box and its plug-in design Overview
|
GB/T 19520.5-2004
|
|
GB/T 19520.6-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series of mechanical structure dimensions -- Part 5-101: Sub-racks its plug-plug handle
|
GB/T 19520.6-2004
|
|
GB/T 19520.7-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series of mechanical structure dimensions -- Part 5-102: Sub-racks its plug-in electromagnetic shielding structure
|
GB/T 19520.7-2004
|
|
GB/T 19520.8-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series of mechanical structure dimensions -- Part 5-103: Sub-racks and plug-in electrostatic discharge protection
|
GB/T 19520.8-2004
|
|
GB/T 19520.9-2004
|
Electronic equipment mechanical structure 482. 6mm (19in) series -- Part 5-104 mechanical structure size: Sub-racks and plug-coded key
|
GB/T 19520.9-2004
|
|
GB/T 19183.1-2003
|
Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 1: Design guidelines
|
GB/T 19183.1-2003
|
|
GB/T 19183.2-2003
|
Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 2: Coordination dimensions for cases and cabinets
|
GB/T 19183.2-2003
|
|
GB/T 19183.3-2003
|
Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 2-1: Dimensions for cabinets
|
GB/T 19183.3-2003
|
|
GB/T 19183.4-2003
|
Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 2-2: Dimensions for cases
|
GB/T 19183.4-2003
|
|
GB/T 19183.5-2003
|
Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 3: Climatic, mechanical tests and safety aspects for cabinets and cases
|
GB/T 19183.5-2003
|
|
GB/T 3047.3-2003
|
Series of basic dimensions of Sub-racks and plug-in units for vertical increment of 20 mm
|
GB/T 3047.3-2003
|
|
GB/T 3047.5-2003
|
Series of basic dimensions of cabinets for vertical increment of 20 mm
|
GB/T 3047.5-2003
|
|
GB/T 7267-2003
|
Basic dimensions of the secondary circuit of the power system control and protection panels and cabinet series
|
GB/T 7267-2003
|
|
GB/T 18663.1-2002
|
Electronic devices mechanical structures Metric Series Inch Series test -- Part 1: The climate of cabinets, racks, Sub-racks and chassis, mechanical tests and safety requirements
|
GB/T 18663.1-2002
|
|
GB/T 3047.1-1995
|
Series of basic dimensions of panels, rack and cabinets for vertical increment of 20mm
|
GB/T 3047.1-1995
|
|
GB/T 15139-1994
|
General technical standard for electrical equipment structure
|
GB/T 15139-1994
|
|
GB/T 3047.3-1989
|
20mm incrementbasic dimension series for subracks and subassemblies
|
GB/T 3047.3-1989
|
|
GB/T 3047.5-1989
|
20mm incrementbasic dimension series for cabiners
|
GB/T 3047.5-1989
|
|
GB/T 8582-1988
|
Terminology for mechnaical structres for electrotechnical and electronic equipment
|
GB/T 8582-1988
|
|
GB/T 7266-1987
|
Basic dimensions of electrical console for secondary circuit of power system
|
GB/T 7266-1987
|
|
GB/T 7267-1987
|
Series of basic dimensions of control and protective panels and cabinet for secondary circuit of power system
|
GB/T 7267-1987
|
|
GB/T 7268-1987
|
Series of basic dimensions of subracks and associated panels of plug-in units for control and protective equipment of secondary circuit of power system
|
GB/T 7268-1987
|
|
GB/T 2900.10-1984
|
Electrotechnical terminology--Electric wire and cable
|
GB/T 2900.10-1984
|
|
GB/T 15708-1995
|
Measurement method of radiated radio interference caused by moving electric locomotive on AC electrified railways
|
GB/T 15708-1995
|
|
GB/T 15709-1995
|
The measurement method of radiated radio interference from contact system of AC electrified railways
|
GB/T 15709-1995
|
|
GB/T 4798.10-1991
|
Environmental conditions exising in the application of electric and electronic products--Introduction
|
GB/T 4798.10-1991
|
|
GB/T 2424.23-1990
|
Basic environmental test procedures for electric and electronic products--Guidance for water test
|
GB/T 2424.23-1990
|
|
GB/T 2900.16-1996
|
Electrotechnical terminology. Power capacitors
|
GB/T 2900.16-1996
|
|
GB/T 40774-2021
|
Technical specification for eco-design product assessment. Office equipment
|
GB/T 40774-2021
|
|
GB/T 20236-2025
|
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight
|
GB/T 20236-2025
|
|
GB/T 2423.21-2025
|
Environmental testing - Part 2: Test methods - Test M: Low air pressure
|
GB/T 2423.21-2025
|
|
GB/T 20643.3-2025
|
Special environmental condition - Environmental test method - Part 3: Artificial environmental test method and guidance - Polymer material
|
GB/T 20643.3-2025
|
|
GB/T 5169.1-2025
|
Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests
|
GB/T 5169.1-2025
|
|
GB/T 10593.4-2025
|
Method of the measuring environmental parameters for electric and electronic products - Part 4: Condensation
|
GB/T 10593.4-2025
|
|
GB/T 10593.5-2025
|
Method of the measuring environmental parameters for electric and electronic products - Part 5: Corrosive gas
|
GB/T 10593.5-2025
|
|
GB/T 20643.1-2025
|
Special environmental condition - Environmental test method - Part 1: General
|
GB/T 20643.1-2025
|
|
GB/T 20643.2-2025
|
Specific environmental condition - Environmental test method - Part 2: Artificial environment test method and guidance - Electric and electronic products (including communication products)
|
GB/T 20643.2-2025
|
|
GB/T 2423.50-2025
|
Environmental testing - Part 2: Test methods - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
|
GB/T 2423.50-2025
|
|
GB/T 2423.66-2025
|
Environmental testing - Part 2: Test methods - Test: Combined temperature/humidity/static load
|
GB/T 2423.66-2025
|
|
GB/T 2900.73-2025
|
Electrotechnical terminology - Part 73: Earthing and protection against electric shock
|
GB/T 2900.73-2025
|
|
GB/T 20625-2024
|
Special environmental condition - Terminologies
|
GB/T 20625-2024
|
|
GB/T 2900.17-2024
|
Electrotechnical terminology - Measuring relays and protection equipment
|
GB/T 2900.17-2024
|
|
GB/T 43867-2024
|
E-Transporters - Terminology and classification
|
GB/T 43867-2024
|
|
GB/T 26669-2024
|
Environmentally conscious design for electrical and electronic products - Terminology
|
GB/T 26669-2024
|