|
US$1239.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17754-2012: Tribology terminology
Status: Valid GB/T 17754: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17754-2012 | English | 1239 |
Add to Cart
|
8 days [Need to translate]
|
Tribology terminology
| Valid |
GB/T 17754-2012
|
| GB/T 17754-1999 | English | RFQ |
ASK
|
14 days [Need to translate]
|
Tribology terminology
| Obsolete |
GB/T 17754-1999
|
PDF similar to GB/T 17754-2012
Basic data | Standard ID | GB/T 17754-2012 (GB/T17754-2012) | | Description (Translated English) | Tribology terminology | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A42 | | Classification of International Standard | 01.040.07 | | Word Count Estimation | 56,538 | | Older Standard (superseded by this standard) | GB/T 17754-1999 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the load induction motor stator winding induction motor internal or placed in a suitable position to prevent thermal overload causing serious damage to the motor thermal protector or thermal detector use requirements. This standard | GB/T 17754-2012: Tribology terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS01.040.07
A42
National Standards of People's Republic of China
Replacing GB/T 17754-1999
The term tribology
Issued on. 2013-10-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Basic terms 1
3 contact with a solid surface and 2
Friction 4 6
5 Wear 10
6 Lubrication 17
7 friction material 25
Lubricating materials 28 8
9 tribology Surface Technology 31
Tribology test equipment 10 32
Pinyin index 39
English Alphabetical Index 44
Figure 1 a unidirectional sliding friction ball rotation and three stationary balls consisting of 33 vice
Reciprocating sliding friction pin 2 of the sample and the sample plate 33 consisting of deputy
3-way sliding friction pin and rotating disc sample sample consisting of 33 vice
4-way sliding friction bulk sample and the sample composition deputy rotating ring 34
Figure 5 relative motion friction of two intersecting cylindrical specimens consisting of 35 vice
Slip friction roller sports two 6 disc specimen composed of 35 deputy
7 test apparatus in the sample is immersed in slurry 36 for rotation
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replacement GB/T 17754-1999 "Tribology term" this standard and GB/T 17754-1999 compared to the main changes are as follows.
--- Revised Chapter 7 Lubricants characteristics;
--- Revised Chapter 8 Lubricants;
--- Revised Chapter 9 of the solid lubricant content and entries merged into Chapter 8-lubricating materials, partially allocated to Chapter 6 lubrication; increased
Tribology and surface technology content entries;
--- Revised Chapter 10 tribological materials content and entries, read Chapter 7, friction material;
--- Amend Chapter 11 of tribology test content and entries, read Chapter 10, tribology test equipment.
The standard proposed by China Machinery Industry Federation.
This standard layer Standardization Technical Committee (SAC/TC57) administered by the National Metal and non-metal cover.
This standard was drafted. Institute of Metal Research, Wuhan Institute of Material protection.
The main drafters of this standard. Li Shu, Chi Cho, Cho, Dong Xianglin.
This standard replaces the standards previously issued as follows.
--- GB/T 17754-1999.
The term tribology
1 Scope
This standard determines the tribological common definition of terms and their definitions or statements.
This standard applies to the field of tribology and related technical standards, technical papers, teaching materials, books and writing and translation, as well as friction discipline
Research, teaching, academic exchange and engineering applications.
2 Basic terms
2.1
Tribology tribology
Surface interactions relevant for the relative motion of objects, friction type behavior and its mechanism, intermediate medium and the environment posed by the system
Damage and control of science and technology, including friction (2.2), abrasion (2.3), research and application of lubrication (2.4) and related issues.
2.2
Friction friction
Between an object under the force of the mutual contact surfaces (3.30) appears to cut the relative motion or tendency to hinder the movement of sports behavior
And along with the phenomena and processes of mechanical energy loss.
2.3
Wear wear
Because of friction (2.2) causing surface deformation phenomena or surface material damage and a gradual loss process.
2.4
Lubrication lubrication
Relative movement and interaction between the surface of the material cut easily added to reduce friction (2.2), wear control (2.3) or other forms of mitigation
Surface design and measures destruction.
2.5
Friction Physics tribophysics
Research on the physical phenomenon of friction [table] surface (4.1) on its interaction on Tribology (2.1) the influence of discipline branch.
2.6
Tribochemistry tribochemistry
Chemical reactions and changes Friction [table] surface (4.1) on the tribological (2.1) Effect of disciplinary branch of law.
2.7
Nanotribology nanotribology
On the surface of nano-materials and their behavior or study law at the nanoscale tribology (2.1).
2.8
Biotribology biotribology
Tribology on organisms, biological materials, biomimetic movement of the device (2.1).
|