|
US$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13147-2009: Specification for welding of copper and copper alloy clad steel plates
Status: Valid GB/T 13147: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13147-2009 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Specification for welding of copper and copper alloy clad steel plates
| Valid |
GB/T 13147-2009
|
| GB/T 13147-1991 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
The specification for welding of copper and copper alloy clad steel plate
| Obsolete |
GB/T 13147-1991
|
PDF similar to GB/T 13147-2009
Basic data | Standard ID | GB/T 13147-2009 (GB/T13147-2009) | | Description (Translated English) | Specification for welding of copper and copper alloy clad steel plates | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U05 | | Classification of International Standard | 47.020.01 | | Word Count Estimation | 16,132 | | Date of Issue | 2009-03-23 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 13147-1991 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.4 (Total No.144) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the copper and copper alloy clad steel plate (hereinafter referred to as copper clad steel plate) welding material, welder, preparation before welding, welding, welding quality inspection and repair welding defects and other technical requirements. This standard applies to the total thickness of more than 8mm, complex layer of copper or copper alloy, grass is carbon steel or low alloy copper clad steel plate welding. This standard is not specified in other copper clad steel plate welded can also reference used. | GB/T 13147-2009: Specification for welding of copper and copper alloy clad steel plates---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for welding of copper and copper alloy clad steel plates
ICS 47.020.01
U05
National Standards of People's Republic of China
Replacing GB/T 13147-1991
Copper and copper alloy clad steel plate welding requirements
Posted 2009-03-23
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 13147-1991 "copper and copper alloy clad steel plate welding conditions."
This standard compared with GB/T 13147-1991, the main changes are as follows.
--- Standard name changed to "copper and copper alloy clad steel plate welding technical requirements";
--- Adjusted normative references;
--- Table 1 in Appendix A to informative;
--- Increasing the helium gas welding protection;
--- Modify requirements buffer layer weld thickness;
--- Modify the provisions of the bending test at room temperature;
--- Security to press GB 9448 "welding and cutting safety" requirement.
Appendix A of this standard is an informative annex.
The standard proposed by China Shipbuilding Industry Corporation.
This standard by the National Standardization Technical Committee Marine boat marine materials application process Technical Committee (SAC/TC12/SC4)
Centralized.
This standard was drafted. China Shipbuilding Industry Corporation seventh twenty-five Institute.
The main drafters of this standard. Wang Xiaohua, Jiang Chengyu, Chao, Houfa Chen, Zheng Xiaojun, Zhang Lei, Wang Ting, Yan Keng.
This standard replaces the standards previously issued as follows.
--- GB/T 13147-1991.
Copper and copper alloy clad steel plate welding requirements
1 Scope
This standard specifies the materials copper and copper alloy clad steel plate (hereinafter referred to as copper clad steel) welding, welder before welding preparation, welding, soldering
Quality inspection and defect repair welding and other technical requirements.
This standard applies to the total thickness of more than 8mm, clad copper or copper alloy, carbon steel or base layer of copper low alloy steel composite plate welding
Connection. This standard is not provided for other welding copper-steel composite panel may also refer to use.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove (GB/T 985.1-2008,
ISO 9692-1.2003, MOD)
GB/T 985.2 SAW recommended groove (GB/T 985.2-2008, ISO 9692-2.1998, MOD)
GB/T 2650 welded joint impact test method (GB/T 2650-2008, ISO 9016.2001, IDT)
GB/T 2651 welded joint tensile test method (GB/T 2651-2008, ISO 4136.2001, IDT)
GB/T 2653 welded joint bending test method (GB/T 2653-2008, ISO 5173.2000, IDT)
GB/T 3125 White copper
GB/T 3323 metal fusion welded joints radiography
GB/T 3670 Copper and copper alloys
GB/T 4842 Ar
GB/T 4844.2 pure helium
GB/T 4844.3 high purity helium
GB/T 5117 carbon steel electrode
GB/T 5118 Low Alloy Steel Electrode
GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product
GB/T 5235 and processing of nickel and nickel alloy chemical composition and shape of the product
GB/T 5293 carbon steel submerged arc welding wire and flux
GB/T 6052 industrial liquid carbon dioxide
GB 9448 Welding and Cutting Safety
GB/T 9460 copper and copper alloy wire (GB/T 9460-2008, ISO /DIS24373.2007, MOD)
GB/T 12470 low alloy steel submerged arc welding wire and flux
GB/T 13238 copper-steel composite plate
GB/T 14957 fusion welding wire
GB/T 15620 nickel and nickel alloy wire (GB/T 15620-2008, ISO 18274.2004, MOD)
GB/T 16957 clad steel plate welded joints Mechanical tests
GB/T 21653 nickel and nickel alloy wire drawing and wire rod (GB/T 21653-2008, ISO 9724.1992, MOD)
JB4708 steel pressure vessel welding procedure qualification
JB/T 4730.2 Non-destructive testing of pressure equipments - Part 2. ray detector
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13147-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 13147-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13147-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13147-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13147-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13147-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|