|
US$739.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13149-2009: Specification for welding of titanium and titanium alloy clad steel plates
Status: Valid GB/T 13149: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13149-2009 | English | 739 |
Add to Cart
|
6 days [Need to translate]
|
Specification for welding of titanium and titanium alloy clad steel plates
| Valid |
GB/T 13149-2009
|
| GB/T 13149-1991 | English | 999 |
Add to Cart
|
6 days [Need to translate]
|
Specification for welding of titanium and titanium alloy clad steel plate
| Obsolete |
GB/T 13149-1991
|
PDF similar to GB/T 13149-2009
Basic data | Standard ID | GB/T 13149-2009 (GB/T13149-2009) | | Description (Translated English) | Specification for welding of titanium and titanium alloy clad steel plates | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U05 | | Classification of International Standard | 47.020.01 | | Word Count Estimation | 32,321 | | Date of Issue | 2009-03-23 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 13149-1991 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.4 (Total No.144) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the materials titanium and titanium clad steel plate welded, welder, preparation before welding, welding process, welding quality inspection and repair welding defects and other technical requirements. This standard applies to the complex layers of titanium and titanium alloys to carbon steel, welding of titanium and titanium clad steel plate, low alloy steel or stainless steel for the grassroots total thickness 8mm or more. | GB/T 13149-2009: Specification for welding of titanium and titanium alloy clad steel plates---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for welding of titanium and titanium alloy clad steel plates
ICS 47.020.01
U05
National Standards of People's Republic of China
Replacing GB/T 13149-1991
Titanium and titanium alloy clad steel plate welding requirements
Posted 2009-03-23
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Materials 2
2 4 welders
5 welding preparation 2
Welding 6 7
7 8 welding quality inspection
8 weld defects repaired 10
9 welding environment 10
10 Safety 10
Appendix A (normative) titanium and titanium welders Rule 11
Annex B (informative) titanium and titanium alloy clad steel plate welding material 19
Annex C (normative) titanium and titanium alloy clad steel plate welding procedure qualification 20
Foreword
This standard replaces GB/T 13149-1991 "titanium and titanium alloy clad steel plate welding conditions."
This standard compared with GB/T 13149-1991, the main changes are as follows.
--- Standard name changed to "titanium and titanium alloy clad steel plates welded technical requirements";
--- Adjusted normative references;
--- Increased titanium and titanium alloy clad steel plates welded principle terms;
--- Clear titanium and titanium alloy clad steel plate by flame or plasma arc cutting composite plate height from the ground when cutting;
--- Increased detailed breakdown titanium weld and heat affected zone of surface color;
--- Revised Appendix A and Appendix B;
--- Table 4 to Information Appendix C "steel plate welded titanium and titanium alloy composite material";
--- Security to press GB 9448 "welding and cutting safety" requirement;
--- Remove the butt joint connector type Ⅱ;
--- Remove the prolonged absence of production and orders for primary steel 22g and 15MnVR available and base metal plate cut strips for manual welding wire
Notes to Table.
The Standard Appendix A, Appendix C is a normative appendix, Appendix B is an informative annex.
The standard proposed by China Shipbuilding Industry Corporation.
This standard by the National Standardization Technical Committee Marine boat marine materials application process Technical Committee (SAC/TC12/SC4)
Centralized.
This standard was drafted. China Shipbuilding Industry Corporation seventh twenty-five.
The main drafters of this standard. standard Li Feng, Wang Xiaohua, Suyu Pei Yu Wei, Wang Jun, Ren Jiangyi, Xuming Lin, Lijing Yong.
This standard replaces the standards previously issued as follows.
--- GB/T 13149-1991.
Titanium and titanium alloy clad steel plate welding requirements
1 Scope
This standard specifies the materials titanium and titanium alloy clad steel plate welding, welders, welding preparation, welding process, welding and weld quality inspection
Defect repair and other technical requirements.
This standard applies to titanium and titanium alloy is stratified, with carbon steel, low alloy steel or stainless steel as the base layer in the total thickness of 8mm or more
Welding of titanium and titanium alloy clad steel plate.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 150 steel pressure vessels
GB/T 983 stainless steel electrode
GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove (GB/T 985.1-2008,
ISO 9692-1.2003, MOD)
GB/T 985.2 SAW recommended groove (GB/T 985.2-2008, ISO 9692-2.1998, MOD)
GB/T 2650 welded joint impact test method (GB/T 2650-2008, ISO 9016.2001, IDT)
GB/T 2651 welded joint tensile test method (GB/T 2651-2008, ISO 4136.2001, IDT)
GB/T 2653 welded joint bending test method (GB/T 2653-2008, ISO 5173.2000, IDT)
GB/T 3323 metal fusion welded joints radiography
GB/T 3620.1 titanium and titanium alloys and chemical composition
GB/T 3623 titanium and titanium alloy wire
GB/T 4241 stainless steel welding rod
GB/T 4340.1 Vickers hardness test - Part 1. Test method (GB/T 4340.1-1999, eqvISO 6507-1.
1997)
GB/T 4698 (all parts) Sponge titanium, titanium and titanium alloys
GB/T 4842 Ar
GB/T 4844.2 pure helium
GB/T 4844.3 high purity helium
GB/T 5117 carbon steel electrode
GB/T 5118 Low Alloy Steel Electrode
GB/T 5293 carbon steel submerged arc welding wire and flux
GB/T 6052 industrial liquid carbon dioxide
GB/T 8546 titanium - stainless steel clad plate
GB/T 8547 titanium - steel composite board
GB 9448 Welding and Cutting Safety
GB/T 12470 low alloy steel submerged arc welding wire and flux
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13149-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 13149-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13149-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13149-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13149-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13149-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|