|
US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13139-2008: General specification for hysteresis synchronous motors
Status: Valid GB/T 13139: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13139-2008 | English | 419 |
Add to Cart
|
3 days [Need to translate]
|
General specification for hysteresis synchronous motors
| Valid |
GB/T 13139-2008
|
| GB/T 13139-1991 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Hysteresis synchronous motors General specification for
| Obsolete |
GB/T 13139-1991
|
PDF similar to GB/T 13139-2008
Basic data | Standard ID | GB/T 13139-2008 (GB/T13139-2008) | | Description (Translated English) | General specification for hysteresis synchronous motors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K24 | | Classification of International Standard | 29.160.30 | | Word Count Estimation | 18,190 | | Date of Issue | 2008-06-13 | | Date of Implementation | 2009-03-01 | | Older Standard (superseded by this standard) | GB/T 13139-1991 | | Quoted Standard | GB/T 2828.1-2003; GB/T 7345; GB/T 7346; GB/T 10405; GB 18211; JB/T 8162-1999; JB/T 9615.1-2000; JB/T 9615.2-2000 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the tape synchronous motor product categories and models, operational conditions, technical requirements and test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to tape synchronous motor and gear reducer with tape synchronous motor. This standard should tape synchronous motor used in conjunction with product-specific technical conditions. Various types of tape synchronous motor specific technical indicators as well as additional or special requirements are in the product-specific technical conditions specified. | GB/T 13139-2008: General specification for hysteresis synchronous motors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for hysteresis synchronous motors
ICS 29.160.30
K24
National Standards of People's Republic of China
Replacing GB/T 13139-1991
Hysteresis Synchronous Motor General technical conditions
Posted 2008-06-13
2009-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Category 1
4 1 Operating Conditions
5 Technical requirements and test methods 2
10 6 Inspection Rules
Delivery 7 to prepare 13
8 customer service 13
Appendix A (informative) Model 14
A. 1 model named 14
A. 2 Frame 14
A. 3 Product Code 14
A. 4 Performance Parameters Code 14
A. 5 Derived Code 14
Foreword
This standard replaces GB/T 13139-1991 "Hysteresis Synchronous Motor General technical conditions."
The original standard GB/T 13139-1991 compared to the main changes are as follows.
--- According to GB/T 1.1-2000. provisions "Standardization Guide Part 1 standard structure and write rules," and in order to
With the relevant harmonized standards, in terms of choreography on a relatively large adjustment.
--- Increased content security and reference GB 18211-2000 "General requirements for safety micro-motor."
Appendix A of this standard is an informative annex.
The standard proposed by China Electrical Equipment Industrial Association.
This standard by the National Standardization Technical Committee micromotor (SAC/TC2) centralized.
This standard was drafted. Xi'an Institute of micro-motors, micro-motor Co., Ltd. Huakai Nanjing, Wuxi Dickson micro motor Co. Ltd., Wuxi
City Jian Qing micro-motor limited liability company.
The main drafters of this standard. ROCKETS, Zhao Donghong, Tengjiang Yan, Gu Fengle, Ma Xiuru.
This standard replaces the standards previously issued as follows.
--- GB/T 13139-1991.
Hysteresis Synchronous Motor General technical conditions
1 Scope
This standard specifies the product category and type, operating conditions, technical requirements and test methods, inspection rules hysteresis synchronous motor, standard
Chi, packaging, transportation and storage.
This standard applies to hysteresis synchronous motors and hysteresis synchronous motor with a gear reducer.
This standard should be used in conjunction with hysteresis synchronous motor product-specific technical requirements. All kinds of hysteresis synchronous motor (hereinafter referred to as motor)
Specific technical indicators as well as additional or special requirements are specified in the product-specific technical conditions.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Program (idt ISO 2859-1.1999)
GB/T 7345 motor control basic technical requirements
GB/T 7346 micro-motor control basic shape structure type
GB/T 10405 control micro-motor type designation
GB 18211 General requirements for safety micro-motor
JB/T 8162-1999 micro-motor control conditions Packaging Technology
JB/T 9615.1-2000 AC low-voltage motors embedded line between San Windings Insulation Test Methods
JB/T 9615.2-2000 AC low-voltage motors embedded line between San Windings Insulation Test Limits
Category 3
3.1 Type designation
Motor model name should be consistent with GB/T 10405 regulations or refer to Appendix A (informative), defined by the product-specific technical requirements.
3.2 Frame
Motor frame size should be consistent with the provisions of GB/T 7346 or product-specific technical conditions.
4 Operating Conditions
4.1 power frequency and voltage level
Motor rated frequency and rated voltage levels to select or comply with product-specific technical requirements in Table 1.
Table 1
Frequency/Hz voltage/V
50 (60) 12,36,110,220,380
400,500,1000 26,36,115,200
4.2 Use of environmental conditions
Environmental conditions of the motor should be selected or defined by the product-specific technical requirements in Table 2 below.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13139-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13139-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13139-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13139-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13139-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13139-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|