|
US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12832-2008: Rubber -- Determination of crystallization effects by hardness measurements
Status: Valid GB/T 12832: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12832-2008 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Rubber -- Determination of crystallization effects by hardness measurements
| Valid |
GB/T 12832-2008
|
| GB/T 12832-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Rubbers--Determination of crystallization effects by hardness measurements
| Obsolete |
GB/T 12832-1991
|
PDF similar to GB/T 12832-2008
Basic data | Standard ID | GB/T 12832-2008 (GB/T12832-2008) | | Description (Translated English) | Rubber -- Determination of crystallization effects by hardness measurements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G40 | | Classification of International Standard | 83.060 | | Word Count Estimation | 8,821 | | Date of Issue | 2008-04-01 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | GB/T 12832-1991 | | Quoted Standard | GB/T 2941; GB/T 6031-1998 | | Adopted Standard | ISO 3387-1994, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.5 (Total No.118) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method used to determine the hardness measurements over time due to the crystallization of rubber caused the gradual hardening effect. It is limited to the initial hardness at a test temperature of 10 IRHD ~ 85 IRHD material. This standard applies to raw rubber, uncured (mixing) the determination of rubber and vulcanized rubber. It is suitable for a clear tendency to crystallize at low temperature rubber, chloroprene rubber and natural rubber. This standard does not apply at the test temperature regulation within 15min to achieve rapid crystallization of a very high degree of crystallinity of the material. | GB/T 12832-2008: Rubber -- Determination of crystallization effects by hardness measurements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber. Determination of crystallization effects by hardness measurements
ICS 83.060
G40
National Standards of People's Republic of China
GB/T 12832-2008/ISO 3387.1994
Replacing GB/T 12832-1991
Rubber crystallization effects by hardness measurements
(ISO 3387.1994, IDT)
Posted 2008-04-01
2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 3387.1994 (English Version) "rubber used to measure the effect of crystallinity measured hardness."
This standard replaces GB/T 12832-1991 "rubber crystallization effects by hardness measurements."
This standard is equivalent translation ISO 3387.1994. Normative reference document, GB/T 2941 identical with ISO 23529.2004, which
At the same time instead of ISO 471, ISO 3383, ISO 4661-1, on exactly the same technical content.
For ease of use, this standard also made the following editorial changes.
a) "this International Standard" be replaced by "this standard";
b) use a decimal point instead of a decimal comma ",". ",";
c) Remove international standards foreword.
This standard compared with GB/T 12832-1991 main changes are as follows.
--- References to normative adjusted. This edition Normative references GB/T 6031 simultaneously replaces the 1991 edition cited
With standard GB/T 6031, GB/T 9866, GB/T 11207, and has been published; with GB/T 2941 at the same time replace the 1991 edition
Referenced standard GB/T 2941, GB/T 9865, GB/T 9868 (see Chapter 2).
--- To select the size of the sample thickness made clear. In this edition the size of the sample thickness is determined according to the hardness of the sample
When, on the hardness range of rubber samples were clearly defined (see 5.1).
--- For hardness measurements with the new requirements. In this edition, when using the method specified in the instrument L, and when the hardness exceeds 35IRHD
Hardness values \u200b\u200bobtained by the calculation method in GB/T 6031, whereas no less than the case when the initial hardness 85IRHD
Make regulations (see 6.1).
--- Initial hardness measured at the test temperature with the new requirements. In this edition of the initial test temperature hardness measurements that
The initial step is not greater than the hardness of the material for the 85IRHD (see 6.3).
--- Increase in the content of the test report (see Chapter 9).
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Rubber and rubber products Standardization Technical Committee rubber physical and chemical test methods Technical Committee (SAC /
TC35/SC2) centralized.
This standard was drafted. Rubber Group in Shenyang Rubber Research Institute.
The main drafters of this standard. Zhao Bodan at Kay's.
This standard replaces the standards previously issued as follows.
--- GB/T 12832-1991.
GB/T 12832-2008/ISO 3387.1994
Rubber crystallization effects by hardness measurements
1 Scope
This standard specifies the method to determine the hardness measurement of rubber over time due to crystallization caused by the gradual hardening effect. It is limited in the trial
Under the initial test temperature hardness of the material 10IRHD ~ 85IRHD.
This standard applies to raw rubber, uncured (compounding) Determination of rubber and vulcanized rubber. It is mainly applied at low temperatures obvious tendency to crystallize
Rubber, such as neoprene and natural rubber.
This standard does not apply at a test temperature adjustment within 15min reach rapid crystallization material relatively high crystallinity.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2941 rubber physical test method for preparing and conditioning General Procedure (GB/T 2941-2006, ISO 23529.2004,
IDT)
GB/T 6031-1998 Determination of vulcanized rubber or thermoplastic rubber hardness (10 ~ 100IRHD) (idt ISO 48.1994)
Principle 3
The following quantities are measured in the sample is placed at a predetermined temperature of.
a) increase the hardness value after a certain time;
b) the hardness value to a predetermined time required.
Different sample thickness measured hardness values \u200b\u200bare not necessarily the same comparative tests shall be performed on a sample of the same thickness.
Different methods of data calculation, report the results may be different, so different methods of value should not be compared.
4 Instrument
4.1 cryogenic tank
According to the provisions of GB/T 2941, and the cryogenic tank with gas as a heat transfer medium, the temperature control should be maintained within ± 1 ℃.
The entire operation and measurements are performed at a low temperature chamber temperature during operation of the sample should remain within the allowable range. This
Modes of operation can be a suitable means to complete, allowing the operator to operate the instrument outside the cold box (for example. the use of the door or box
Hand wall of the hole and gloves to operate).
4.2 hardness
Hardness should be consistent with the provisions of GB/T 6031-1998 of. If you use a lubricant, it should be used not to make the instrument at the test temperature
Caused by friction between the lubricant.
4.3 Tweezers or clamps
For holding a sample.
4.4 Gloves
Used to operate the test equipment.
4.5 vulcanizing machine
Used to prepare raw rubber, unvulcanized sample (mixing) gum.
GB/T 12832-2008/ISO 3387.1994
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12832-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 12832-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12832-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12832-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 12832-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12832-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|