|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11964-2008: Test method for loss on heating of asphalt
Status: Valid GB/T 11964: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11964-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Test method for loss on heating of asphalt
| Valid |
GB/T 11964-2008
|
| GB/T 11964-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Asphalt--Determination of evaporation loss
| Obsolete |
GB/T 11964-1989
|
PDF similar to GB/T 11964-2008
Basic data | Standard ID | GB/T 11964-2008 (GB/T11964-2008) | | Description (Translated English) | Test method for loss on heating of asphalt | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E43 | | Classification of International Standard | 75.140 | | Word Count Estimation | 6,632 | | Date of Issue | 2008-02-13 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | GB/T 11964-1989 | | Quoted Standard | GB/T 5304; GB/T 11147 | | Adopted Standard | ASTM D6-1995 (2000), MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.2 (Total No.115) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the determination of the quality of petroleum asphalt when heated under specified conditions (excluding water) changes. This standard applies to petroleum asphalt. This standard does not involve the use of relevant safety regulations, standards, users have a responsibility to develop appropriate safety procedures before using the application. | GB/T 11964-2008: Test method for loss on heating of asphalt---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for loss on heating of asphalt
ICS 75.140
E43
National Standards of People's Republic of China
Replacing GB/T 11964-1989
Determination of evaporation loss of petroleum asphalt
Posted 2008-02-13
2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts the American Society for Testing and Materials standard ASTMD6-95 (2000) "Oil and bitumen heating loss test compound
Fixed "(in English).
The Standard (2000) redrafted according ASTMD6-95.
Suitable for China's national conditions, this standard has been partially modified using ASTMD6-95 (2000) time. This standard ASTMD6-
The main difference between 95 (2000) as follows.
--- This standard uses the International System of Units, by deleting ASTMD6-95 non-SI units in parentheses (2000);
--- The standard oven comprises about 5.1 by deleting the contents of FIG. 1, used in line with the technical requirements of the oven GB/T 5304 stipulated;
--- The standard prescribed by the informative Appendix A thermometer specifications;
--- Deletion of 9.1 and 9.2, follow the GB/T 11964-1989 precision requirements;
--- Increasing the sample after evaporation of the quality score calculation formula.
This standard replaces GB/T 11964-1989 "asphalt Determination of evaporation loss." This standard compared with GB/T 11964-1989
The main changes are as follows.
--- Chapter 1, added "This standard does not involve safety regulations on use standard user has the responsibility to develop an appropriate security prior to use
Full application procedures ";
--- Chapter 4 adds meaning and purpose;
--- The GB/T 11964-1989 5.1 in Chapter 5, "maximum heating temperature should not exceed 150 ℃" to "should be at the lowest possible temperature
By heating the sample and the degree of stirring slowly to avoid foam sample, the maximum heating temperature not higher than the softening point of the sample estimate
90 ℃, the heating time should be less than 30min. "
Appendix A of this standard is an informative annex.
This standard by the National Standardization Technical Committee on products and lubricant oil (SAC/TC280) proposed.
The standard by the China University of Petroleum (East China) Heavy Oil Research Institute.
This standard was drafted. China University of Petroleum (East China) Heavy Oil Research Institute.
The main drafters of this standard. Guoxiang, Lin Yuankui.
This standard was first released in December 1989, the present revision of the 1st amendment.
Determination of evaporation loss of petroleum asphalt
1 Scope
This standard specifies the determination of the quality of petroleum asphalt is heated under specified conditions (excluding water) change.
This standard applies to petroleum asphalt.
This standard does not involve the use of relevant safety requirements, standards, responsibility of the user to develop appropriate safety procedures before using the application.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5304 Asphalt Thin Film Oven Test Method
GB/T 11147 bitumen sampling method
3 Method Summary
The sample is placed in a 55mm diameter dish containing the sample, in an oven 163 ℃ ± 1 ℃ in holding 5h. Before and after the sample is calculated evaporation test substance
The amount of change in accounting for the mass fraction of the sample.
4. Significance and Use
The method is characterized by determining the nature of the change in the quality of petroleum pitch under standard test conditions.
5 Apparatus and materials
5.1 thermostatic oven. The specified GB/T 5304 oven or other oven meet the appropriate technical conditions.
5.2 Thermometer. 155 ℃ ~ 170 ℃, see Appendix A provision.
5.3 Sheng-like dish. flat cylindrical dish, the inner diameter of 55mm ± 1mm, depth 35mm ± 1mm, made of metal or glass.
5.4 Balance. a sense of the amount of 0.001g.
6 Test preparation
6.1 according to GB/T 11147 sampling.
6.2 sufficient amount of sample is placed in a suitable vessel and heated to a fluid state, and stir well. Should be heated at a temperature as low as possible
Samples and slowly stirred to avoid foam sample, the maximum heating temperature not higher than the softening point of the sample is estimated that 90 ℃, the heating time should be less than
30min. As the sample contains water, the water should be off by a suitable method, or take a free water sample.
6.3 Weighing clean, dry Sheng-like dish, weighing accuracy 0.001g, melted 50g ± 0.5g sample asphalt poured into a sample dish, and cooled to room
After the temperature weighing accuracy of 0.001g.
7 Test procedure
7.1 to adjust the level of the oven, so that rotation of the turntable in the horizontal plane, the thermometer hung on the rack turntable shaft, the mercury ball is in the bottom of the turntable
The above 6mm office. Thermometers anchor position and distance from the outer edge of the disk center should be equal. Oven maintained at a temperature of 163 ℃ ± 1 ℃.
7.2 The two samples containing specimens containing dish on the oven dial and close the oven door, turntable speed 5r/min ~ 6r/min. when
Inside the oven when the temperature rises to 162 ℃ start time, 5H duration of the test, the total time in the oven the sample test time should not exceed
|