|
US$554.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1149.10-2013: Internal combustion engines -- Piston rings -- Part 10: Keystone rings made of steel
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1149.10-2013 | English | 554 |
Add to Cart
|
3 days [Need to translate]
|
Internal combustion engines -- Piston rings -- Part 10: Keystone rings made of steel
| Valid |
GB/T 1149.10-2013
|
PDF similar to GB/T 1149.10-2013
Basic data | Standard ID | GB/T 1149.10-2013 (GB/T1149.10-2013) | | Description (Translated English) | Internal combustion engines -- Piston rings -- Part 10: Keystone rings made of steel | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J92 | | Classification of International Standard | 27.020 | | Word Count Estimation | 28,221 | | Quoted Standard | ISO 6621-4 | | Adopted Standard | ISO 6624-3-2001, IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the Piston Ring Model T, TB, TBA, TM, K, KB, KBA and KM trapezoidal steel piston ring (hereinafter referred to as the trapezoidal steel ring) of the basic dimensional characteristics. This standard applies to the cylinder diameter | GB/T 1149.10-2013: Internal combustion engines -- Piston rings -- Part 10: Keystone rings made of steel
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Internal combustion engines Piston rings Part 10... Keystone rings made of steel
ICS 27.020
J92
National Standards of People's Republic of China
Piston Ring
Part 10. trapezoidal steel ring
Part 10. Keystoneringsmadeofsteel
(ISO 6624-3.2001, IDT)
Issued on. 2013-12-31
2014-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 1 Overview
Example 1 and Type 4 tags
5 General features 10
6 Modulus of elasticity 15
7 Specifications 15
References 24
Foreword
GB/T 1149 "Piston Ring" is divided into 16 parts.
--- Part 1. General rules;
--- Part 2. Terminology;
--- Part 3. Material specifications;
--- Part 4. Quality requirements;
--- Part 5. Test methods;
--- Part 6. Cast wiper;
--- Part 7. rectangular cast iron ring;
--- Part 8. rectangular steel ring;
--- Part 9. trapezoidal cast iron ring;
--- Part 10. trapezoidal steel ring;
--- Part 11. Cast iron wedge ring;
--- Part 12. wedge-shaped steel ring;
--- Part 13. Oil ring;
--- Part 14. Spiral spring supporting oil ring;
--- Part 15. Cast iron spiral stays reed thin oil ring;
--- Part 16. strip combination oil ring.
This section GB/T 1149 Part 10.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 6624-3.2001 (E) "Piston Ring Part 3. trapezoidal steel ring" (English
Version).
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 1149.1-2008 internal combustion engine piston rings - Part 1. General rules (ISO 6621-4.2003, IDT);
This part is proposed by China Machinery Industry Federation.
This part of the internal combustion engine by the National Standardization Technical Committee (SAC/TC177) centralized.
This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Nanjing Chebi Piston Ring Co., Ltd., Shijiazhuang Jingang Internal Combustion Engine Parts set
Group Co., Ltd., Anqing Dili Bo Bo Geci Piston Ring Co., Ltd., Yizheng Piston Ring Co., Ltd., Fujian East Asia Machinery Co., Ltd.
The main drafters of this section. Su Qing Hua, Song Jianhua, Liu Jindong, Wang Xing, Zhouyue Ting, Yang Jing.
Piston Ring
Part 10. trapezoidal steel ring
1 Scope
This section GB/T 1149 specifies the piston ring Model T, TB, TBA, TM, K, KB, KBA and KM trapezoidal steel piston
Ring (hereinafter referred to as trapezoidal steel ring) of the basic dimensional characteristics.
This section applies to the trapezoidal steel ring cylinder diameter from 70mm to 160mm reciprocating internal combustion engine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 6621-4 Piston Ring Part 4. General rules (Internalcombustionengines-Pistonrings-
Part 4. Generalspecifications)
3 Overview
General Characteristics trapezoidal steel ring and dimensions shown in Figure 1 to 8 and Tables 1 to 3, the general characteristics and dimensions shown in Figure 9 to 15 and
Tables 4 to 9. Modulus of elasticity of different types of trapezoidal steel ring Table 10 and Table 11, the ladder angle of 6 ° and 15 ° trapezoidal steel ring size and bombs
Force are shown in Table 12 and Table 13.
4 types and tag example
--- 4.1 T type cylinder 6 ° trapezoidal steel ring
4.1.1 General Characteristics
Size and elastin in Table 12.
|