|
US$629.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11313.10-2012: Radio-frequency connectors -- Part 10: Sectional specification -- SMB series R.F. coaxial connectors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11313.10-2012 | English | 629 |
Add to Cart
|
5 days [Need to translate]
|
Radio-frequency connectors -- Part 10: Sectional specification -- SMB series R.F. coaxial connectors
| Valid |
GB/T 11313.10-2012
|
PDF similar to GB/T 11313.10-2012
Basic data | Standard ID | GB/T 11313.10-2012 (GB/T11313.10-2012) | | Description (Translated English) | Radio-frequency connectors -- Part 10: Sectional specification -- SMB series R.F. coaxial connectors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L23 | | Classification of International Standard | 33.120.30 | | Word Count Estimation | 27,288 | | Older Standard (superseded by this standard) | GB/T 14865-1993 | | Quoted Standard | IEC 61169-1-1998 | | Adopted Standard | IEC 60169-10-1983, NEQ | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the two universal connector and 0 standard test connector mating interface dimensions, standard gauge testing requirements, product ratings and characteristics as well as select from IEC 61169-1: 1998 applies to SMB series connecto | GB/T 11313.10-2012: Radio-frequency connectors -- Part 10: Sectional specification -- SMB series R.F. coaxial connectors
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio-frequency connectors Part 10. Sectional specification SMB series RF coaxial connectors
ICS 33.120.30
L23
National Standards of People's Republic of China
Replacing GB/T 14865-1993
RF connectors - Part 10.
SMB series RF coaxial connector specification
Part 10. Sectionalspecification-SMBseriesR.F.coaxialconnectors
[IEC 60169-10. 1983, Radio-frequencyconnectors-Part 10. RFcoaxial
connectorswithinnerdiameterofouterconductor3mm (0.12in) with
snap-oncoupling-Characteristicimpedance50ohms (TypeSMB), NEQ]
Issued on. 2013-06-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 mating interface and standard gauge 1
3.1 universal connector (Level 2) 1
3.2 standard gauge 5
3.3 Standard Test Connectors (0) 7
4 Quality assessment procedures 10
4.1 General 10
4.2 ratings and characteristics 10
4.3 List of test and inspection requirements 13
5 to develop a detailed specification of the guide 15
5.1 General 15
5.2 Detailed specification of identification 16
5.3 Identification of components 16
5.4 Performance 16
5.5 mark, order documents and related matters 16
5.6 test, the test conditions and the severity of the select 16
5.7 SMB series connector Blank detail specification format 16
Foreword
GB/T 11313 "RF Connectors" have or plan to release the following sections.
--- Part 1. Generic specification - General requirements and test methods
--- Part 2. RF coaxial connectors 9.52 specification (GB/T 11313.2-2007; IEC 61169-2.2001, IDT)
--- Part 3. balanced antenna feeder with two-pin connector
--- Part 4. inner diameter of outer conductor 16mm (0.63in), a characteristic impedance of 50Ω, threaded RF coaxial connectors (7-16
Type) (GB/T 11313.4-2007; IEC 60169-4. 1975, NEQ)
Part --- Article 5. 96IEC 50-17 and greater RF coaxial cable connector specification
--- Part 6. 96IEC 75-17 and greater RF coaxial cable connector specification
Part --- Article 7. C Series RF coaxial connector specification
--- Part 8. inner diameter of the outer conductor 6.5mm (0.256in), a characteristic impedance of 50Ω (75Ω), RF coaxial connector bayonet connection
Connector (BNC type) specification
--- Part 9. SMC Series RF coaxial connector specification
Part --- Article 10. SMB series RF coaxial connector specification
--- Part 11. 4.1/9.5 series RF coaxial connector specification
Part --- Article 12. UHF series RF coaxial connector specification
--- Part 13. inner diameter of the outer conductor 5.6mm (0.22in), mating with the same size of a characteristic impedance of 75Ω (1.6/5.6
Type) and a characteristic impedance of 50Ω (1.8/5.6 type) RF coaxial connector specification
--- Part 14. inner diameter of outer conductor 12mm (0.472in), a characteristic impedance of 75Ω, RF coaxial connectors with screw connection
(3.5/12 type) specification
--- Part 15. SMA Series RF coaxial connector specification
--- Part 16. inner diameter of the outer conductor 7mm (0.276in), a characteristic impedance of 50Ω (75Ω), RF coaxial threaded connection
Connector (N-type) specification
--- Part 17. inner diameter of the outer conductor 6.5mm (0.256in), a characteristic impedance of 50Ω, RF coaxial connectors with screw connection
(TNC type) specification
Part --- Article 18. SSMA series RF coaxial connector specification
--- Part 19. SSMB series RF coaxial connector specification
--- Part 20. SSMC series RF coaxial connector specification
--- Part 21. SC-A and SC-B Series Series RF coaxial connector specification
--- Part 22. BNO Series RF coaxial connector specification
--- Part 23. 3.5mm with rigid precision coaxial lines with the outer conductor inner diameter of 3.5mm (0.1378in) RF coaxial
Connector specification
--- Part 24. 75Ω cable distribution systems connected by a threaded RF coaxial connector (F-type) (GB/T 11313.4-2001;
IEC 60196-24.1991, IDT)
--- Part 25. Connect the inner conductor double shielded symmetrical cable outer conductor inner diameter of 13.56mm (0.534in) of holes threaded connection
Sectional specification
--- Part 26. TNCA Series RF coaxial connector specification
--- Part 27. 75Ω cable distribution systems with a threaded connection RF coaxial connectors (E-type) specification
--- Part 28. RF coaxial characteristic impedance of 75Ω, card lock connection, the outer conductor inner diameter of 5.60mm (0.220in) connection
Sectional specification
--- Part 29. characteristic impedance of 50Ω, a threaded, push-pull, quick lock or slide rack or panel connected RF Coaxial
Device (1.0/2.3 type) specification
--- Part 31. inner diameter of the outer conductor 1.0mm (0.039in), the characteristic impedance of 50Ω, RF coaxial connector threaded connection
(1.0 type) specification
--- Part 32. inner diameter of the outer conductor is 1.85mm (0.072in), the characteristic impedance of 50Ω, RF coaxial threaded connection
Filter (1.85 type) specification
--- Part 33. BMA RF coaxial connector specification (GB/T 11313.33-2001; IEC 61169-33.1996,
IDT)
--- Part 35. 2.92 Series RF coaxial connector specification
--- Part 36. characteristic impedance of 50Ω of the snap connection miniature RF coaxial connectors (MCX type) (GB/T 11313.36-
2006, IEC 61169-36.1996, IDT)
Part --- Article 37. STWX8 Series RF coaxial connector specification
--- Part 38. 50Ω back and slide-in module panel RF coaxial connector (TMA type) specification
--- Part 39. CQM series quick lock RF coaxial connectors specification
--- Part 40. RF coaxial connector series 2.4 specification
--- Part 41. CQA series quick lock RF coaxial connectors specification
--- Part 42. CQN series quick lock RF coaxial connectors specification
Part --- Article 43. RBMA series blind mating RF coaxial connectors specification
Part --- Article 44. SMP series RF coaxial connector specification
Part --- Article 45. SQMA series quick lock RF coaxial connectors specification
Part --- Article 47. Fquick series 75Ω cable distribution systems with plug-in RF coaxial connector specification
Part --- Article 48. BMP series blind mating RF coaxial connectors specification
Part --- Article 49. SMAA Series RF coaxial connector specification
This section GB/T 11313 Part 10.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 14865-1993 "SMB RF coaxial connector", compared with the GB/T 14865-1993, Technical
Changes are as follows.
--- Remove the "model name", "type A Summary," "Dimension" and "signs, packaging, transport and storage" (see GB/T 14865-
1.3,3.1.4,3.1.5 and Chapter 5, 1993);
--- The corresponding increase ratings and characteristics (see 4.2);
--- Increasing the standard test connector geometric tolerance (see Figures 5 and 6);
--- Increased to develop a detailed specification guidelines (see Chapter 5);
--- Increased "SMB series connector Blank Detail Specification Format" (see 5.7).
This section uses redrafted law Reference IEC 60169-10. 1983 "radio frequency connectors - Part 10. inner diameter of the outer conductor 3mm
(0.12in), a characteristic impedance of 50Ω, keyed connectors RF coaxial connectors (SMB type) "(English Version) (including repair orders 1. 1986
And repair orders 2.1996) prepared with IEC 60169-10. 1983 (including repair orders 1. 1986 and repair orders 2. The degree of uniformity 1996) is
Non-equivalent.
This part of IEC 60169-10. 1983 (including repair orders 1. 1986 and repair orders 2.1996) The main technical differences are as follows.
--- Remove the "IEC model named" "Ratings" "preferred climatic categories" "Structure Summary" to "Dimensions" and "Type Test List
Table "(see IEC 60169-10. 1983 first 2,3,4,7,8 and 9).
--- IEC 60169-10. 1983 standard test connector not specified geometric tolerances, part of this increase (see Figures 5 and 6).
--- IEC 60169-10. Repair Order 21983.1996 in "10.2 rating and characteristics of" bad reflection coefficient index, into this section
Line increase (see Table 7).
--- IEC 60169-10. "10.2 Ratings and Characteristics" table in the 1996 discharge test docking 1.42mm. Repair Order 21983 of
(0.056in) semi-rigid cable voltage value is set too high, inconsistent with the actual, this part of the change (see Table 7).
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190).
This section is drafted. Shaanxi Huada Technology Co., Ltd., China Electronics Standardization Institute.
The main drafters of this section. Wu Xiaoxi, Guo Yan, Wu Zhengping, Wang Xin Rong.
This part of the standard replaces the previous editions are.
--- GB/T 14865-1993.
RF connectors - Part 10.
SMB series RF coaxial connector specification
1 Scope
GB/T 11313 provisions of this part of the level 2 and 0 universal connector standard test connector mating interface dimensions, gauges detection
Requirements, ratings and characteristics of the product as well as from IEC 61169-1.1998 applies to select SMB series connectors of all the relevant details
Standardized test schedule and inspection requirements.
This section provides the development of SMB series RF coaxial connectors detailed specification and content rules, and blank detail specification format.
This section provides the recommended performance characteristics when preparing a detailed specification should be considered, including the M-Class and H-level assessment level
List of test and inspection requirements.
This section applies to SMB series RF coaxial connector which has a nominal impedance of 50Ω, for microwave applications latch connection,
Connected with RF cable or microstrip, the connector uses the frequency to at least 4GHz.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
IEC 61169-1.1998 RF connectors - Part 1. Generic specification - General requirements and test methods (Radio-frequencycon-
nectors-Part 1. Genericspecification-Generalrequirementsandmeasuringmethods)
3 mating interface and standard gauge 1)
3.1 universal connector (Level 2)
3.1.1 pin connector
Pin connector interface shown in Figure 1.
1) The portion of the original size in inches, not all note sizes graphical structure for reference only.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11313.10-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 11313.10-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 11313.10-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11313.10-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|