|
US$529.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 39800.7-2023: Specifications for the provision of personal protective equipment - Part 7: Electronic industry
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 39800.7-2023 | English | 529 |
Add to Cart
|
5 days [Need to translate]
|
Specifications for the provision of personal protective equipment - Part 7: Electronic industry
| Valid |
GB 39800.7-2023
|
PDF similar to GB 39800.7-2023
Basic data | Standard ID | GB 39800.7-2023 (GB39800.7-2023) | | Description (Translated English) | Specifications for the provision of personal protective equipment - Part 7: Electronic industry | | Sector / Industry | National Standard | | Classification of Chinese Standard | C73 | | Classification of International Standard | 13.340.01 | | Word Count Estimation | 26,224 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2025-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 39800.7-2023: Specifications for the provision of personal protective equipment - Part 7: Electronic industry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13:340:01
CCSC73
National Standards of People's Republic of China
Personal protective equipment equipment specifications
Part 7: Electronics
Part 7: Electronic industry
Implemented on 2025-01-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 1
5 Identification and Assessment of Hazard Factors 1
6 Provision of personal protective equipment 5
Appendix A (informative) Job types in the electronics industry and their possible hazards 6
Appendix B (informative) Equipment of personal protective equipment for various types of work in the electronics industry 10
Reference 21
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is Part 7 of GB 39800 "Specifications for the Equipment of Personal Protective Equipment": GB 39800 has released the following parts:
---Part 1: General provisions;
---Part 2: Petroleum, chemical industry, natural gas;
---Part 3: Metallurgy, non-ferrous metals;
---Part 4: Non-coal mines;
---Part 5: Building materials;
---Part 6: Electricity;
---Part 7: Electronics:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the Ministry of Emergency Management of the People's Republic of China:
Introduction
Personal protective equipment, also known as labor protection equipment, is the "last line of defense" to protect the lives of hundreds of millions of workers: Practitioners are correct
Wearing and using personal protective equipment is an important means to ensure safe production and emergency management in my country: Establish mandatory personal protective equipment
The equipment standards are to specify and standardize the requirements of Article 45 of the "Work Safety Law of the People's Republic of China": GB 39800 "Individual Defense
"Personal Protective Equipment Equipment Specifications" aims to establish the requirements for the equipment and management of personal protective equipment for employers, and is intended to consist of the following ten parts:
---Part 1: General principles: The purpose is to establish the overall requirements for the employer's personal protective equipment equipment, including equipment principles, equipment
Process, identification and assessment of hazardous factors in the workplace, selection, discarding and replacement of personal protective equipment, training and use, etc:
---Part 2: Petroleum, chemical industry, natural gas: The purpose is to establish personal protective equipment for employers in the petroleum, chemical and natural gas industries
Equipment requirements, identification and assessment of hazard factors, etc:
---Part 3: Metallurgy, non-ferrous metals: The purpose is to establish the personal protective equipment requirements and hazard causes for employers in the metallurgical and non-ferrous metal industries:
Identification and evaluation of elements, etc:
---Part 4: Non-coal mines: The purpose is to establish the personal protective equipment requirements and hazard factors for employers in non-coal mining industries:
identification and evaluation, etc:
---Part 5: Building materials: The purpose is to establish requirements for personal protective equipment for employers in the building materials industry, identification of hazard factors and
Assessment etc:
---Part 6: Electricity: The purpose is to establish requirements for personal protective equipment for employers in the power industry, identification of hazard factors and
Assessment etc:
---Part 7: Electronics: The purpose is to establish requirements for personal protective equipment for employers in the electronics industry, identification of hazard factors and
Assessment etc:
---Part 8: Ships: The purpose is to establish requirements for personal protective equipment for employers in the shipbuilding industry, identification of hazard factors and
Assessment etc:
---Part 9: Automobiles: The purpose is to establish requirements for personal protective equipment for employers in the automotive industry, identification of hazardous factors and
Assessment etc:
---Part 10: Machinery: The purpose is to establish the requirements for personal protective equipment for employers in the machinery industry and the identification of hazard factors:
and evaluation etc:
The provision of personal protective equipment is based on the full identification and assessment of hazard factors for specific types of work: Different industries
The hazard factors faced by different types of work vary greatly: Therefore, documents are compiled into parts according to different industries, which together constitute the personal protective equipment in our country:
Equipment management standard system: In the future, more industries will be included in time according to the situation to further improve the management of personal protective equipment equipment in our country:
standard system:
Personal protective equipment equipment specifications
Part 7: Electronics
1 Scope
This document stipulates the overall requirements for the provision of personal protective equipment (i:e: labor protection supplies) and hazard factors for each employer in the electronics industry:
Identification and assessment of personal protective equipment requirements:
This document applies to the provision and management of personal protective equipment for all employers in the electronics industry:
This document does not apply to the provision and management of personal protective equipment for fire protection by employers in the electronics industry:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB 39800:1-2020 Specifications for Personal Protective Equipment Part 1: General Principles
3 Terms and definitions
The terms and definitions defined in GB 39800:1-2020 apply to this document:
4 General requirements
The principles, equipment management and equipment procedures for personal protective equipment are implemented in accordance with the provisions of GB 39800:1-2020:
5 Identification and assessment of hazard factors
Employers should combine the characteristics of safe production in the electronics industry and comply with the requirements of 4:2 in GB 39800:1-2020 during their production processes:
Identify and assess hazards that may be involved: Employers can refer to the job categories listed in Table 1, or refer to those listed in Appendix A:
Identify hazard factors for the type of work and conduct a hazard assessment on the identified hazard factors as a basis for selecting suitable personal protective equipment:
in accordance with:
Table 1 Main job categories, possible types of accidents or injuries, and applicable personal protective equipment
serial number
Operation
category
illustrate
may cause
accident or injury
Examples of suitable personal protective equipment for work
Object exists
fall, hit
click job
Object falls or falls sideways
There may be objects colliding with each other
Operation
Object strikes,
Lifting injuries, etc:
TB-01 safety helmet
YM-04 professional eye and face protective gear
ZB-01 safety shoes
ZL-09 safety net
Crystal batching kettle, wafer making
manufacturing, relay assembly, etc: possible
Work involving falling objects
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 39800.7-2023_English be delivered?Answer: Upon your order, we will start to translate GB 39800.7-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 39800.7-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB 39800.7-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|