HOME   Cart(3)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 3883.11-2012 English PDF

US$599.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 3883.11-2012: [GB/T 3883.11-2012] Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for reciprocating saws (jig and sabre saws)
Status: Obsolete

GB 3883.11: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 3883.11-2012English599 Add to Cart 3 days [Need to translate] [GB/T 3883.11-2012] Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for reciprocating saws (jig and sabre saws) Obsolete GB 3883.11-2012
GB 3883.11-2005English399 Add to Cart 3 days [Need to translate] Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for reciprocating saws (Jig and Sabre Saws) Obsolete GB 3883.11-2005
GB 3883.11-1991English199 Add to Cart 3 days [Need to translate] Safety of hand-held motor-operated electric tools--Part 11: Particular requirements for electric reciprocating saws (jig and sabre saws) Obsolete GB 3883.11-1991

PDF similar to GB 3883.11-2012


Standard similar to GB 3883.11-2012

GB/T 4343.2   GB/T 3883.311   GB/T 5959.41   GB 3883.20   GB 3883.7   GB 3883.19   

Basic data

Standard ID GB 3883.11-2012 (GB3883.11-2012)
Description (Translated English) [GB/T 3883.11-2012] Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for reciprocating saws (jig and sabre saws)
Sector / Industry National Standard
Classification of Chinese Standard K64
Classification of International Standard 25.140.20
Word Count Estimation 14,168
Older Standard (superseded by this standard) GB 3883.11-2005
Quoted Standard GB/T 2423.55-2006; GB/T 4207-2003; GB 4208-2008; GB 4706.1-2005; GB/T 4956-2003; GB 5013.4; GB 5023.5; GB/T 5465.2-1996; GB/T 6462; GB 8898-2001; GB 9364.1; GB/T 11021; GB/T 11918-2001; GB/T 11919-2001; GB 13140.3; GB/T 14472; GB 14536.1-2008; GB 15092.1-
Adopted Standard IEC 60745-2-11-2008, IDT
Regulation (derived from) National Standards Bulletin No. 28 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard relates to a motor or solenoid driven AC single-phase and DC rated voltage not exceeding 250V, three-phase AC rated voltage not exceeding 440V handheld electric tools. If applicable, the part of the people involved in the normal use

GB 3883.11-2012: [GB/T 3883.11-2012] Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for reciprocating saws (jig and sabre saws)


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of hand-held motor-operated electric tools.Part 2. Particular requirements for reciprocating saws (jig and sabre saws) ICS 25.140.20 K64 National Standards of People's Republic of China Replacing GB 3883.11-2005 Safety of hand-held power tools Part 2. reciprocating saws (jig, saber saws) of Special requirements Part 2. Particularrequirementsforreciprocatingsaws (jigandsabresaws) (IEC 60745-2-11.2008Ed2.1, Hand-heldmotor-operatedelectric tools-Safety-Part 2-11. Particularrequirementsforreciprocating saws (jigandsabresaws), IDT) Published 2013-05-01 2012-11-05 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China issued

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative References 1 Terms and definitions 1 3 4 General Requirements 1 Test 5 1 General Requirements 6 Void 2 7 Category 2 8 signs and instructions 2 9 is protected to prevent access to live parts 2 10 is started 2 11 Power input and current 2 12 heat 2 13 leakage current 2 14 moisture resistance 2 15 Electric strength 2 16 and its associated circuitry to the transformer overload 3 17 Endurance 3 18 upset 3 19 mechanical hazards 3 20 mechanical strength 3 21 Structure 3 Internal wiring 22 3 23 Component 4 Power source 24 and the coupling extension cord 4 Terminal 25 of the outer lead 4 4 grounding device 26 4 with the coupling member 27 screw 28 creepage distance and clearance distance through insulation 4 29 in heat resistance, flame retardancy and resistance to tracking 4 4 30 rust 31 radiation, toxicity and similar hazards 4 Appendix 7 Annex K (normative) tool battery and the battery cartridge 7 Annex L (normative) providing a non-isolated power source coupled to the battery and battery box tool 7 Reference 8

Foreword

All technical contents of this section is mandatory. GB 3883 "Safety of hand-held electric tools" is the safety standard for hand-held power tools from Part 1 General requirements and Requirements for Part 2 composition. GB 3883 composition "safe hand-held electric tools" are as follows. --- GB 3883.1 "The first part of the security hand-held power tools. General requirements" --- GB 3883.2 "Safety - Part 2 hand-held power tools. screwdrivers and impact wrenches." --- GB 3883.3 "safe hand-held electric tools Part II. grinders, polishers and disc sanders requirements" --- GB 3883.4 "Safety of hand-held electric tools Part 2. Non-disc sanders and polishers other special requirements" --- GB 3883.5 "The second part of the security hand-held power tools. circular saws" --- GB 3883.6 "Safety - Part 2 hand-held power tools. electric drills and impact drills requirements" --- GB 3883.7 "Safety handheld power tool Part 2. requirements for hammers tool" --- GB 3883.8 "Safety of hand-held electric tools Part 2. Particular requirements for electric shears and of" --- GB 3883.9 "Safety - Part 2 hand-held power tools. tappers requirements" --- GB 3883.10 "safe hand-held electric tools Part II. Particular requirements for planers" --- GB 3883.11 "handheld power tool safety Part 2. reciprocating saws (jig, saber saws) special requirements" --- GB 3883.12 "Safety - Part 2 hand-held power tools. Particular requirements for concrete vibrators" --- GB 3883.13 "the second part of the security hand-held power tools. non-flammable liquid spray guns for special requirements" --- GB 3883.14 "the second part of the security hand-held power tools. Particular requirements for chain saws." --- GB 3883.15 "the second part of the security hand-held power tools. pruning shears requirements" --- GB 3883.16 "safe hand-held electric tools Part II. Particular requirements for tackers" --- GB 3883.17 "the second part of the security hand-held power tools. routers and trimmers special requirements" --- GB 3883.18 "the second part of the security hand-held power tools. Particular requirements for marble cutters" --- GB 3883.19 "safe hand-held electric tools Part 2. Particular requirements for drain cleaners." --- GB 3883.20 "Safety - Part 2 hand-held power tools. requirements for strapping" --- GB 3883.21 "Safety - Part 2 hand-held power tools. band saws" --- GB 3883.22 "Safety handheld power tool of the second part. the requirements for slotter" This section GB 3883 Part 2. requirements for reciprocating saws (jig, saber saws) a. This section drafted in accordance with the rules GB/T 1.1-2009 given. This partial replacement 3883.11-2005 "safe handheld power tool of the second portion of GB . reciprocating saws (jig, saber saws) dedicated Requirements ", compared with GB 3883.11-2005, the main changes are as follows. --- In "signs and instructions", add details about security warnings (see 8.12.1.1); --- In the "Durability", the increase request "is not installed in the tool available switching on and off the tool." (See 17.2); --- typical design increases the jig saw, the saw blade typical design (see 102, FIG. 103); --- modified appendix K, Appendix L; --- on the scope, 3.102,3.103,8.1,19.1 editorial changes. This section uses the translation method is equivalent to using 60745-2-11 IEC .2008 (version 2.1) security "hand-held power tools section 2-11 Point. reciprocating saws (jig, saber saws) special requirements ", and identical with IEC 60745-1.2006 (4.0 Version)" handheld power tool safety Full Part 1. General requirements first part of the security, "the development of GB 3883.1-2008" hand-held power tools. General Requirements " Since use. This section states that "suitable", showing the corresponding provisions applicable in GB 3883.1-2008; stated in this section, "Change", and should In this section prevail provisions; stated in this section, "Edit", and indicates the corresponding provision of GB 3883.1-2008 content should be present After some changes the contents of the subject, and the provision of other content still apply; this states "addition", expressed in addition to compliance with GB 3883.1- Outside of the corresponding provision 2008, this section shall comply with the added provision. This section was proposed by China Electrical Equipment Industrial Association. This part of the jurisdiction of the National Power Tools Standardization Technical Committee (SAC/TC68). This section was drafted. Shanghai Electric Tool Research Institute. This part drafter. Pan Shunfang, Libang Association, according to Li, Liu Jiang. Previous versions of this part of the case released. --- GB 3883.11-1985, GB 3883.11-1991, GB 3883.11-2005. Safety of hand-held power tools Part 2. reciprocating saws (jig, saber saws) of Special requirements

1 Scope

In addition to the following provisions, GB 3883.1-2008 of this chapter apply. increase. This section applies to reciprocating saws, jig saws and saws and knives for example.

2 Normative references

This chapter GB 3883.1-2008 is applicable.

3 Terms and Definitions

In addition to the following provisions, GB 3883.1-2008 of this chapter apply. Increased definition. 3.101 Reciprocating saw reciprocatingsaw One or more blades to reciprocate or swing back and forth to various materials sawing tools. 3.102 Jig saw jigsaw Reciprocating saw with a base plate, the base plate allows the adjustment of the inclination angle. NOTE. jigsaw typical design shown in Figure 102. 3.103 Saws sabresaw With a reciprocating saw guide plate, the guide plate to allow tilting movement. NOTE. saws typical design shown in Figure 103.

4 General requirements

This chapter GB 3883.1-2008 is applicable. General requirements Test 5 This chapter GB 3883.1-2008 is applicable.

6 Void

Category 7 This chapter GB 3883.1-2008 is applicable.

8 signs and instructions

In addition to the following provisions, GB 3883.1-2008 of this chapter apply. 8.1 Addition. After the first four dashes increase. ---place of origin; 8.12.1.1 increase. When the cutting insert itself or may touch the dark line of the cord is operated to hold a tool for gripping by the insulating surface. Cutting attached Member charged by the charging wire touch the metal parts exposed so that the tool will make the operator an electric shock.

9 protection against contact with live parts

This chapter GB 3883.1-2008 is applicable. 10 start This chapter GB 3883.1-2008 is applicable. Power input and current 11 This chapter GB 3883.1-2008 is applicable. 12 fever This chapter GB 3883.1-2008 is applicable. Leakage current 13 This chapter GB 3883.1-2008 is applicable. 14 moisture resistance This chapter GB 3883.1-2008 is applicable. Electrical strength 15 This chapter GB 3883.1-2008 is applicable. Overload protection circuit 16 and its associated transformer This chapter GB 3883.1-2008 is applicable. 17 Endurance In addition to the following provisions, GB 3883.1-2008 of this chapter apply. 17.2 increase. Available not installed in the tool switch on and off the tool. 18 abnormal operation This chapter GB 3883.1-2008 is applicable. 19 mechanical hazards In addition to the following provisions, GB 3883.1-2008 of this chapter apply. 19.1 Addition. a) versus Saw. Equipped with protective devices for an upper floor, to prevent accidental contact with jagged edges in the end plate side. Checked by inspection and the following test. The jigsaw sawing placed in 90 ° position, as shown in FIG. 101a) of the test probe is placed above the floor, as shown in FIG 101b) and FIG 101c) of the Shows. Test probe jagged edges should be perpendicular to the axis of the saw blade, the test probe should be placed a central plane bisecting the blade. When the probe towards the saw Sheet moving direction should reach impossible jagged edges. b) For other types of reciprocating saws. If the reciprocating saw designed to have a grip region in its vicinity and behind the saw blade, spacers should be provided to prevent accidental contact with the blade. From Since the amount of the gripping surface, the minimum height of the spacer should be 6mm, and is disposed between the blade and the grip region. If the tool is fitted with an auxiliary hand before Handle, there is no need spacers. Checked by inspection and measurement. 20 Mechanical strength This chapter GB 3883.1-2008 is applicable. 21 structure This chapter GB 3883.1-2008 is applicable. Internal wiring 22 This chapter GB 3883.1-2008 is applicable. 23 components This chapter GB 3883.1-2008 is applicable. 24 and the external power supply cord coupling This chapter GB 3883.1-2008 is applicable. The outer lead terminals 25 This chapter GB 3883.1-2008 is applicable. Grounding device 26 This chapter GB 3883.1-2008 is applicable. The coupling member 27 with a screw This chapter GB 3883.1-2008 is applicable. 28 creepage distance and clearance distance through insulation This chapter GB 3883.1-2008 is applicable. 29 in heat resistance, flame retardancy and resistance to tracking This chapter GB 3883.1-2008 is applicable. 30 rust This chapter GB 3883.1-2008 is applicable. 31 Radiation, toxicity and similar hazards This chapter GB 3883.1-2008 is applicable. In millimeters a) Test Probe Size NOTE. simplicity, the structure to prevent the upper jig saw blade touches the test probes are omitted. b) show a side view of the test probe position and direction of movement Note. For simplicity, the upper structure of the jigsaw is omitted. c) show a plan view of the bottom plate of the test probe position Description. --- A test probe; b --- floor. Test probe 101 of FIG. 102 jigsaw typical design of FIG. 103 saws typical design of FIG. appendix Except as follows, GB 3883.1-2008 Appendix applicable. Appendix K (Normative) Tool battery and battery box K.1 increase. Unless otherwise provided in this appendix, all applicable requirements of chapter dedicated. K.8.12.1.1 change as follows. When the cutting insert dark lines may touch operation, the tool should be gripped by gripping an insulating surface. Cutting live wire will encounter Accessories Charging the metal parts of the tool exposed so that an operator receiving an electric shock. Appendix L (Normative) Power source coupled to provide non-isolated tool battery and battery box L.1 increase. Unless otherwise provided in this appendix, all applicable requirements of chapter dedicated. references GB 3883.1-2008 references apply.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 3883.11-2012_English be delivered?

Answer: Upon your order, we will start to translate GB 3883.11-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 3883.11-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB 3883.11-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 3883.11-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 3883.11-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.