Path: Home > GB > Page7 > GB 29620-2013 Home > Standard_List > GB > Page7 > GB 29620-2013
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 29620-2013 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Emission standard of air pollutants for brick and tile industry
| Valid |
GB 29620-2013
|
PDF similar to GB 29620-2013
Basic data | Standard ID | GB 29620-2013 (GB29620-2013) | | Description (Translated English) | Emission standard of air pollutants for brick and tile industry | | Sector / Industry | National Standard | | Classification of Chinese Standard | Z60 | | Classification of International Standard | 13.040.40 | | Word Count Estimation | 9,975 | | Quoted Standard | GB/T 15432; GB/T 16157; HJ/T 42; HJ/T 43; HJ/T 55; HJ/T 56; HJ/T 57; HJ/T 67; HJ/T 75; HJ 480; HJ 481; HJ 482; HJ 483; " auto pollution monitoring and management approach" (State Environmental Protection Administration Order No. 28); "Environmental monito | | Regulation (derived from) | Department of Environmental Protection Notice No. 38 of 2013; National Standards Bulletin No. 21 of 2013 | | Issuing agency(ies) | Ministry of Environmental Protection, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China | | Summary | This standard specifies: brick industrial processes atmospheric pollutants emission limits, monitoring and monitoring requirements, and standards such as the implementation and supervision of the relevant provisions. This standard applies to: the existing | GB 29620-2013: Emission standard of air pollutants for brick and tile industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Emission standard of air pollutants for brick and tile industry
National Standards of People's Republic of China
Brick and tile industry atmospheric pollutant emission standards
(Release)
Issued on. 2013-09-17
2014-01-01 implementation
release
Ministry of Environmental Protection
State Administration of Quality Supervision, Inspection and Quarantine
Ministry of Environment protection
State Bureau of Quality Supervisor
Table of Contents
Preface .II
1. Scope .1
2 Normative references .1
3 Terms and definitions ..2
4 pollutant emission control requirements 2
5 pollutant monitoring requirements .3
6 Implementation and Supervision ..4
Foreword
To implement the "People's Republic of China Environmental Protection Law", "People's Republic of China Air Pollution Prevention Law," "the State Council on the implementation of
Scientific concept of development to strengthen environmental protection decision "and other laws and regulations," the State Council on the preparation of the country's main functional area planning "
Protect the environment, prevent pollution, promote the progress of brick industrial production process and pollution control technology, the development of this standard.
This standard specifies the brick industrial enterprises air pollutants emission limits, monitoring and control requirements applicable to large brick industrial enterprises
Air pollution control and management.
The standard emission concentrations of pollutants are mass concentration.
Brick industrial enterprises discharge of water pollutants, odor pollutants, environmental noise applicable relevant national pollutant discharge standards, resulting in solid
Identification of the body of waste, treatment and disposal of solid waste pollution control applicable national standards.
This standard is the first release.
From the date of implementation of this standard, brick industrial enterprises air pollutant emission control executed by the provisions of this standard, no longer perform the "big
Air pollutant discharge standards "(GB 16297) and" industrial furnace air pollutant emission standards "(GB 9078) in the relevant regulations
set.
Local people's governments at the provincial level are not specified in this standard pollutants may establish their local emission standards; this standard
Contamination already specified items may establish more stringent standards in this local emission standards.
This standard is developed by the Ministry of Environmental Protection Science, Technology organization.
This standard drafting units. China Environmental Science Research Institute, Xi'an wall materials research institute.
This standard Ministry of Environmental Protection May 24, 2013 for approval.
This standard since January 1, 2014 implementation.
The standard explanation by the Ministry of Environmental Protection.
Brick and tile industry atmospheric pollutant emission standards
1 Scope
This standard specifies the implementation of air pollutant emission limits, monitoring requirements and brick industrial processes, as well as standard and
Supervision and other relevant provisions.
This standard applies to existing brick industrial enterprises air pollutant discharge management or production facilities, as well as brick industrial building projects
Environmental impact assessment, environmental protection facilities design, air pollutant emissions management and acceptance of completed and put into production after.
This standard applies to clay, shale, coal gangue, fly ash as the main raw material of brick and tile production process and sintered products with gravel,
Fly ash, lime and cement as the main raw material of non-sintered brick products production process. This standard does not apply to the use of sludge, waste, and its
He tailings industrial raw materials such as brick and tile production process.
This standard applies to pollution discharge permitted by law. Established in the new location and sources of existing pollution sources in special protected areas
Management, according to "People's Republic of China Air Pollution Prevention Law," "People's Republic of China Environmental Impact Assessment Law" and other laws,
Relevant provisions of the regulations and rules execution.
2 Normative references
This standard refers to the contents of the following documents or the terms. For undated references, the effective version applies to this
standard.
Determination of GB/T 15432 Ambient Air Act by weight of total suspended particulates
GB/T 16157 Stationary source emission-Determination of particulates and gaseous pollutants sampling methods
Determination of UV HJ/T 42 Stationary source emission of nitrogen oxides spectrophotometry
HJ/T 43 Stationary source emission-Determination of nitrogen oxides hydrochloride naphthylethylenediamine spectrophotometry
HJ/T 55 fugitive emission monitoring of air pollutants Technical guidelines
HJ/T 56 stationary source emission measurement of sulfur dioxide Iodometry
Determination of HJ/T 57 stationary source emission of sulfur dioxide constant potential electrolysis
HJ/T 67 Stationary source emission-Determination of fluoride ion selective electrode method
HJ/T 75 stationary sources Continuous Emission Monitoring Technical Specification (Trial)
HJ 480 Ambient air - Determination of fluoride filter sampling and fluorine ion selective electrode method
HJ 481 Ambient air - Determination of fluoride lime - paper sampling and fluorine ion selective electrode method
HJ 482 Ambient air Determination of sulfur dioxide - Formaldehyde absorbing - pararosaniline spectrophotometry
Determination of mercury salts tetrachloride HJ 483 ambient air sulfur dioxide absorbing - pararosaniline spectrophotometry
"Pollution automatic monitoring and management approach" (SEPA Order No. 28)
"Environmental Monitoring Management Measures" (SEPA Order No. 39)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 brick industrial brick and tile industry
By starting material, extrusion (pressing) molding, drying and calcination (autoclaved) and other production processes, products and non-fired brick and tile production
Fired brick and tile products industry.
3.2 existing enterprises existing facility
Means before implementation of this standard has been completed and put into production or environmental impact assessment document has passed the brick industrial enterprises and production facilities approved.
3.3 new enterprises new facility
It refers to the date of implementation of this standard from the environmental impact assessment documents through new construction, renovation and expansion of the brick industrial construction project approval.
3.4 exhaust stack height height
Means the exhaust (the main building or structure) where the ground plane to the exhaust outlet meter height.
3.5 standard state standard condition
When the temperature is 273.15K, when the pressure of the state 101325Pa. Emissions of air pollutants concentration limits specified in this standard are
Dry gas under standard conditions as a benchmark.
3.6 excess air ratio excess air coefficient
It refers to the ratio of industrial furnaces running actual air quantity and the theoretical air requirement.
3.7 enterprise boundaries enterprise boundary
It refers to the legal boundary brick industrial enterprises. If there is no legal boundary, it refers to the actual border.
4 pollutant emission control requirements
4.1 is from January 1, 2014 until June 30, 2016, the implementation of existing enterprises specified in Table l of air pollutants emission limits.
4.2 Since July 1, 2016, the implementation of existing enterprises specified in Table 2 emission limits of air pollutants.
4.3 Since January 1, 2014, implementation of new enterprises specified in Table 2 emission limits of air pollutants.
Table 1 air pollutant emission limits for existing enterprises
Unit. mg/m3
Maximum allowable emission concentration of pollutant emission monitoring location
production process
Particulates SO2 NOx (as NO2)
Fluoride
(Total fluorine dollars)
Preparation of raw materials and fuels broken molding 100 --- --- ---
Artificial drying and calcining 100,850 (gangue) 400 (other) --- 3
Workshop or production facilities row
Inflator
Table 2 air pollutant emission limits for new enterprises
Unit. mg/m3
Maximum allowable emission concentration of pollutant emissions monitoring the position of the production process
Particulates SO2 NOx (as NO2)
Fluoride (with F
meter)
Preparation of raw materials and fuels broken molding 30 --- --- ---
Artificial drying and calcining 303,002,003
Workshop or production facilities
Exhaust
4.4 enterprise boundary air pollution to perform any one hour average concentration limits specified in Table 3.
Table 3 existing and new enterprise boundary air pollutants concentration limits
Unit. mg/m3
Item No. pollutant concentration limits
1 1.0 Total Suspended Particulates
2 0.5 sulfur dioxide
3 Fluoride 0.02
4.5 In the existing production, construction projects environmental acceptance after completion of the production process, the regulatory authorities responsible for environmental protection response
Sensitive area quality of the environment around housing, education, medical and other applications to monitor specific monitoring range of construction projects for environmental impact
Around sensitive areas identified in the evaluation; did not conduct environmental impact assessment of existing enterprises, the monitoring by the scope of the main responsible for the supervision of environmental protection
Authorities, based on factors such corporate sewage characteristics and laws of nature and local weather conditions, refer to the relevant Environmental Impact Assessment
Guidelines OK. Local government should be responsible for the environmental quality of the area, take measures to ensure compliance with the environmental situation Environmental quality standards.
4.6 Production process and apparatus for generating atmospheric pollutants must establish partial or total gas collection systems and centralized purification devices. people
Workers drying and calcining kiln exhaust height shall be not less than 15m. When there is a building within a radius of around 200m range exhaust, exhaust
Tube height should be higher than the highest building more than 3m.
4.7 Reference excess air ratio of 1.7, the concentration of atmospheric emissions of pollutants should be measured in terms of excess air factor reference emission concentration. Raw
Production facilities should take reasonable ventilation, shall not intentionally dilute emissions.
5 pollutant monitoring requirements
General Requirements 5.1 contaminants monitoring
5.1.1 sampling exhaust emissions of the enterprise should be based on the type of the pollutants in emissions monitoring predetermined position, there
Exhaust gas treatment facility shall be monitored after the facility. In emissions monitoring location shall be provided specifications permanent test hole sampling level
Station and outfall signs.
5.1.2 New businesses and existing businesses to install automatic monitoring equipment, emissions requirements according to relevant laws and "source of pollution automatic monitoring
Predetermined control management approach "implementation.
5.1.3 Pollutant emissions monitoring frequency, sampling time and other requirements, according to the national technical specifications relating to pollution monitoring
Regulations.
5.1.4 Enterprises should be in accordance with relevant laws and regulations, "environmental monitoring management approach", the sewage to monitor the situation and save the original prison
Test records.
5.2 air pollutant monitoring requirements
5.2.1 Setting the sampling method of execution by 16157 sampling points and HJ/T provisions of GB/T 75's.
5.2.2 sensitive building orientation, conduct fugitive emissions monitoring, where necessary, according to the specific requirements of HJ/T 55 monitoring.
5.2.3 Determination of the enterprise emission of air pollutant concentrations using standard methods listed in Table 4.
Table 4 Determination of air pollution monitoring project
Item No. Pollutant Method Standard Method Standard No. Title
Determination of Total Suspended Particulates - Gravimetric method GB/T 15432
1 PM
Stationary source emission-Determination of particulates and gaseous pollutants sampling method GB/T 16157
Stationary source emission determination of sulfur dioxide Iodometry HJ/T 56
Stationary source of sulfur dioxide in the exhaust gas constant potential electrolysis method HJ/T 57
Ambient air Determination of sulfur dioxide - Formaldehyde absorbing - pararosaniline spectrophotometry HJ 482
2 sulfur dioxide
Determination of mercury salts tetrachloride absorption of sulfur dioxide in ambient air - pararosaniline spectrophotometry HJ 483
Fixed by UV source emission of nitrogen oxide by spectrophotometry HJ/T 42
Nitrogen oxides 3
Stationary source emission-Determination of nitrogen oxides hydrochloride naphthylethylenediamine spectrophotometry HJ/T 43
Stationary source emission-Determination of fluoride ion selective electrode method HJ/T 67
Ambient air-Determination of fluoride filter sampling and fluorine ion selective electrode method HJ 480 4 fluoride
Ambient air-Determination of fluoride lime - paper sampling and fluorine ion selective electrode method HJ 481
6 Implementation and Supervision
6.1 standard by the people's governments above the county level environmental protection administrative department responsible for overseeing implementation.
6.2 In any case, the enterprise shall comply with the standard of air pollutant emission control requirements, to take the necessary measures to ensure pollution control
Facilities running. Environmental protection departments at all levels supervise the facility checks can instantly spot sampling or monitoring results, as judged
Set emission behavior meets emissions standards and the implementation of environmental management measures related basis.
Price & DeliveryUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 29620-2013: Emission standard of air pollutants for brick and tile industry
Status: Valid
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 29620-2013_English be delivered?Answer: Upon your order, we will start to translate GB 29620-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 29620-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB 29620-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |