HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 28155-2011 English PDF

US$339.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 28155-2011: [GB/T 28155-2011] Nicosulfuron oil-based suspension concentrates
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 28155-2011English339 Add to Cart 3 days [Need to translate] [GB/T 28155-2011] Nicosulfuron oil-based suspension concentrates Valid GB 28155-2011

PDF similar to GB 28155-2011


Standard similar to GB 28155-2011

GB/T 38211   GB/T 18418   GB/T 18419   GB 28146   GB 28147   GB 28145   

Basic data

Standard ID GB 28155-2011 (GB28155-2011)
Description (Translated English) [GB/T 28155-2011] Nicosulfuron oil-based suspension concentrates
Sector / Industry National Standard
Classification of Chinese Standard G25
Classification of International Standard 65.100.20
Word Count Estimation 13,199
Date of Issue 2011-12-30
Date of Implementation 2012-04-15
Quoted Standard GB/T 1601; GB/T 1604; GB/T 1605-2001; GB 3796; GB/T 4472; GB/T 6682-2008; GB/T 8170-2008; GB/T 14825-2006; GB/T 16150; GB/T 19136; GB/T 19137
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard specifies the Nicosulfuron dispersible oil suspensions requirements, test methods and marking, labeling, packaging, storage, guarantee period. This standard applies to Nicosulfuron original drug with a suitable additives and fillers processed into Nicosulfuron dispersible oil suspensions.

GB 28155-2011: [GB/T 28155-2011] Nicosulfuron oil-based suspension concentrates

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Nicosulfuron oil-based suspension concentrates ICS 65.100.20 G25 National Standards of People's Republic of China Nicosulfuron dispersible oil suspensions Issued on. 2011-12-30 2012-04-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard Chapter 3, Chapter 5 is mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some content of this document may involve patents, the issuing authority of this document does not assume responsibility for the identification of these patents. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee on Pesticides (SAC/TC133) centralized. This standard is drafted by. Shenyang Chemical Research Institute Co., Ltd. Participated in the drafting of this standard. Hefei Xingyu Chemical Co., Ltd., Anhui Fengle Agrochemical Co., Ltd., Jiangsu Changqing Agrochemical shares Parts Co., Ltd. Shandong Jingbo Agrochemicals Co., Ltd., Xinyi Kay Agricultural Chemical Co., Ltd., Jiangsu Province Institute of hormones, Jiangsu Dongbao Pesticide Chemical Co., Ltd. Jiangsu Rui Wo Chemical Co., Ltd., Jiangsu Agrochemical Co., Qantas. The main drafters of this standard. to light, Xing Jun, Wang Chuan goods, Wang Yuping, Ji Yuping, He Shaohui, Wang Haiyan, Fan Lei, Xukai Yun, Yu Guoxin, Chen Jie. Nicosulfuron dispersible oil suspensions

1 Scope

This standard specifies the nicosulfuron oil dispersible suspension of requirements, test methods and marking, labeling, packaging, storage and transportation, the guarantee period. This standard applies to nicosulfuron nicosulfuron by the original drug with suitable additives and fillers can be processed into Metsulfuron dispersed oil suspensions. Note. Other name, structural formula and basic physicochemical parameters nicosulfuron in Appendix A.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Determination of GB/T 1601 Pesticides pH value GB/T 1604 Goods pesticide regulations for acceptance GB/T 1605-2001 Sampling Method commercial pesticides GB 3796 pesticide packaging General GB/T 4472 chemical product density, relative density measurement General GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD) GB/T 8170-2008 revised value represents about rules and limit values and judgment GB/T 14825-2006 Method for determination of pesticide suspension GB/T 16150 pesticide powder, wettable powder fineness measurement method GB/T 19136 Determination of Pesticide Thermal storage stability GB/T 19137 Pesticide cryogenic stability Determination

3 Requirements

3.1 Composition and appearance This product should be compliant nicosulfuron original drug is made as flowability, easy to measure the volume of off-white liquid suspension, the storage process can Precipitation can occur, but after shaking, restitution should, there should be no lumps. 3.2 Technical Specifications Nicosulfuron oil dispersible suspensions shall comply with the requirements in Table 1. Table 1 nicosulfuron oil dispersible suspension control project indicators project index 40g/L 100g/L Nicosulfuron mass fraction /% Or concentration of a (20 ℃) / (g/L) 10.0 1.0 to 1.0 4.1 0.4-0.4 404-410010-10 Table 1 (continued) project index 40g/L 100g/L pH range of 3.0 to 7.0 Suspension rate /% ≥ 90 Wet sieve test (through 75μm test sieve) /% ≥ 98 Persistent foaming (foam volume after 1min)/mL ≤ 30 Dispersion stability qualified Dumping of b /% After pouring the residue ≤ After washing the residue ≤ 5.0 0.8 Thermal storage stability b qualified Low temperature stability Qualified b When a dispute occurs when mass to the mass fraction of arbitration. B when normal production, dumping, thermal storage stability test, measuring low temperature stability test at least once every three months. Test Method 4 Safety Tips. Use of this standard shall have practical experience of laboratory personnel work. This standard does not point out all of the safety issues. Make With those who have the responsibility to take appropriate safety and health practices and to ensure compliance with the relevant national regulations. 4.1 General provisions This standard reagents and water in the absence of other requirements specified, refers to three analytical reagent and GB/T 6682-2008 specified in water. Test results determined in accordance with GB/T 8170-2008 4.3.3 Rounding the value comparison method. 4.2 Sampling According to GB/T 1605-2001 in "liquid formulations sampling" approach. Determined by sampling a random number table method packages, the final sample size Not less than 600mL. 4.3 Identification Test HPLC --- The identification test can be carried out simultaneously with the determination of nicosulfuron mass fraction. In the same chromatographic operating conditions , The retention time of the standard solution and the sample solution to a peak of nicosulfuron chromatographic retention time, the relative difference should be 1.5% Fewer. 4.4 Determination of nicosulfuron mass fraction 4.4.1 Method summary Sample was dissolved in acetonitrile, glacial acetic acid in aqueous acetonitrile as the mobile phase, to use as filler SymmetryC18 stainless steel column and ultraviolet Detector (240nm), the sample of nicosulfuron high performance liquid chromatography and determination. 4.4.2 Reagents and solutions Acetonitrile. HPLC grade; Water. The new secondary steam distilled water; Glacial acetic acid; Aqueous ammonia (NH3 · H2O). w (NH3) = 26% ~ 30%; Aqueous ammonia solution. Ψ (H2O.NH3 · H2O) = 300.1; Acetonitrile aqueous ammonia solution. Ψ (acetonitrile. ammonia solution) = 50.50; Nicosulfuron standard. a known mass fraction w≥97.0% (at 105 ℃, 1h drying after use). 4.4.3 Instruments High performance liquid chromatography. a variable wavelength UV detector; Chromatographic data processor or workstation; Column. 250mm × 4.6mm (id) stainless steel column contents SymmetryC18,5μm filler; Filter. filter pore size of about 0.45μm; Micro injector. 50μL; Quantitative sample line. 5μL; Ultrasonic cleaner. 4.4.4 HPLC operating conditions Mobile phase. Ψ (CH3CN.H2O) = 40.60, glacial acetic acid adjusted to pH 3.0; Flow rate. 1.0mL/min; Column temperature. room temperature (temperature change should not exceed 2 ℃); Detection wavelength. 240nm; Injection volume. 5μL; Retention time. nicosulfuron about 6.0min. It said operating parameters are typical, according to the characteristics of different instruments, given operating parameters adjusted as appropriate, in order to obtain the best results. Typical nicosulfuron oil dispersible suspensions HPLC is shown in Figure 1. 1 --- nicosulfuron. Figure 1 nicosulfuron oil dispersible suspensions HPLC Fig. 4.4.5 measuring step 4.4.5.1 Preparation of standard solution Weigh 0.05g nicosulfuron standard (accurate to 0.0001g), a 50mL volumetric flask, add 40mL acetonitrile aqueous ammonia solution, Ultrasonic oscillation 5min to dissolve the sample was cooled to room temperature, shake, dilute to the mark with acetonitrile ammonia. Using a pipette to take the above solution 10mL to 50mL volumetric flask, dilute ammonia solution with acetonitrile to the mark. 4.4.5.2 Preparation of sample solution Weigh Tobacco ethyl 0.05g sample (accurate to 0.0001g), a 50mL volumetric flask, add 40mL acetonitrile aqueous ammonia solution Liquid ultrasonic oscillations 5min to dissolve the sample was cooled to room temperature, shake, dilute to the mark with acetonitrile ammonia. Using a pipette to take the above solution 10mL to 50mL volumetric flask, dilute ammonia solution with acetonitrile to the mark. 4.4.5.3 Determination Under these operating conditions, after the instrument is stable, continuous injection of several doses of the standard solution until the two adjacent needles nicosulfuron peak area becomes relatively After less than 1.2% of the solution in accordance with the sample solution, the sample solution and standard sequence of the standard solution was measured. 4.4.6 Calculation The two needle sample solution and measured before and after the two doses of the standard sample solution nicosulfuron peak areas are averaged. Sample nicosulfuron Metsulfuron mass fraction w1 according to equation (1) to calculate the mass concentration according to the formula (1 ') Calculated. w1 = A2 · M1 · w A1 · m2 (1) ρ1 = A2 · m1 · ρ · w × 10 A1 · m2 (1') Where. w1 --- nicosulfuron mass fraction, expressed as a percentage; A2 --- sample solution, the average nicosulfuron peak area; m1 --- standard mass in grams (g); Concentration ρ1 --- nicosulfuron, in units of grams per milliliter (g/mL); Density ρ --- 20 ℃ when the sample in grams per milliliter (g/mL) (according to GB/T 4472 of "density meter method" determination); w --- standard samples nicosulfuron mass fraction, expressed as a percentage; A1 --- the standard solution, the average nicosulfuron peak area; m2 --- sample mass, in grams (g). 4.4.7 allowable difference Nicosulfuron mass fraction (concentration) of two parallel determination results relative difference should be less than 4%, and the arithmetic mean as measured Given result. 4.4.8 pH value measurement According to GB/T 1601 carried out. 4.4.9 Determination of the suspension rate According to GB/T 14825-2006 4.3 performed. Weigh Tobacco ethyl 0.1g sample (accurate to 0.0001g), the remaining The suspension and the precipitate was transferred to a 100mL flask with 60mL acetonitrile aqueous ammonia solution 3 times 25mL all wash residue Into the 100mL flask, under ultrasonic oscillations 5min, cooled to room temperature, volume, shaken, filtered, measured by 4.4 of nicosulfuron Quality, calculate the suspension rate. 4.4.10 Wet sieve test According to GB/T 16150 in the "wet sieve method". 4.4.11 Persistent foaming 4.4.11.1 Method summary The sample was mixed with a predetermined amount of standard hard water, after standing foam volume recorded. 4.4.11.2 reagent Standard hard water. ρ (Ca2 Mg2) = 342mg/L, pH = 6.0 ~ 7.0, according to GB/T 14825-2006 formulated. 4.4.11.3 instruments and appliances Stoppered cylinder. 250mL (division value 2mL, 0 ~ 250mL tick 20cm ~ 21.5cm, 250mL scale line to the bottom plug 4cm ~ 6cm); Industrial scale. a sense of the amount of 0.1g. 4.4.11.4 determining step Added 180mL graduated cylinder standard hard water, 1.0g sample was weighed into a graduated cylinder (accurate to 0.1g), added to standard hard water from the cylinder Plug at the bottom tick 9cm, the cover plug to the bottom of the cylinder as the center, upside down 30 times (2s). Stand on the test stand 1min, record lather volume. 4.4.12 dispersion stability 4.4.12.1 Method summary Dispersions are prepared according to the provisions of concentrations, were placed in two graduated emulsion tube upright standing for some time, and then invert emulsion tube several times to observe the most First, placing a certain time and re-dispersion of the dispersion liquid dispersion. 4.4.12.2 Instruments and reagents Emulsion tube. borosilicate glass conical bottom centrifuge tube, length 15cm, scale to 100mL; The rubber stopper. supporting and emulsion tube with 80mm long glass exhaust pipe (outer diameter of 4.5mm, an inner diameter of 2.5mm, see Figure 2); Graduated cylinder. 250mL; Adjustable lamp. 60W with Pearl foam; Standard hard water. ρ (Ca2 Mg2) = 342mg/L, according to GB/T 14825-2006 formulated. 4.4.12.3 Procedure At room temperature, respectively, to two 250mL graduated cylinder was added to 240mL standard hard water scale line, each with a pipette to the graduated cylinder Solution of the sample 5g (or other predetermined number), the pipette tip as close as possible to the surface when dropped, but not in the water below. Finally, add the standard hard Water to the mark. Wear cloth gloves to the middle of the cylinder axis, upside down 30 times to ensure that the graduated cylinder liquid gently flows, the recoil does not occur, Every time reversal for an 2s (elapsed time with a stopwatch observed), with one cylinder and creams do precipitation test, another test cylinder do redispersed. 1) initial dispersion. dispersion was observed, recorded precipitation, cream or oil slick. 2) place a certain time after dispersion. Volumetric precipitation. Good dispersion prepared immediately after the dispersion was transferred to a 100mL emulsion tube stoppered at room temperature (23 ℃ ± 2 ℃) upright 30min, lights illuminate the emulsion tube, adjust the light angle and position to achieve the best observation of the two-phase interface, if there is precipitation (usually reflected light More than the transmitted light precipitation was observed), record precipitation volume (accurate to ± 0.05mL). Millimeters

2 rubber with a glass tube of the exhaust plug

The top of the cream (or oil slick) volume determination. Good dispersion prepared immediately after it was poured into the emulsion tube, pipe from top to 1mm, wear protective gloves, stuffed with rubber exhaust pipe Stopper, emulsifying exclude all air tube, remove the dispersion liquid overflow, the emulsion inverted tube, kept at room temperature for 30min, no liquid from the milk The open end of the discharge pipe would not have sealed glass tube, it has formed a record volume of cream or oil slick. Determination of the total volume of the emulsion tube, and (2) correcting the measured volume of cream or oil slick. Cream or oil slick measuring correction factor by volume, according to the formula (2 ') Calculated. F = 100V0 (2) V2 '= F × V2 (2') Where. F --- the total volume of the emulsion tube correction factor; V0 --- total volume of the emulsion tube; V2 '--- precipitation measured volume and the volume of cream or oil slick; Precipitation volume and cream or oil slick volume V2 --- measurements. 3) Re-dispersion measurement. Good dispersion after the preparation, only the second cylinder was allowed to stand at room temperature for 24h, as described previously inverted cylinder 30, was added to the dispersion additionally Emulsion tube, standing 30min, according to the aforementioned method for determining the volume and the volume of precipitation cream or oil slick. 4.4.12.4 measurement results Initially dispersion completely dispersed After a certain time dispersion (30min later) precipitation ≤5mL Cream or oil slick ≤3mL Re-dispersible (24h later) precipitation ≤1mL Cream or oil slick ≤2mL The measurement results meet the above requirements is eligible. 4.4.13 Dumping Determination 4.4.13.1 Method summary Will be placed in the container suspending sample placed after a certain time, in accordance with prescribed procedures dumping determined trapped in the sample container Volume; the vessel was washed with water, and then measuring the amount of container. 4.4.13.2 Instrument With ground joint stopper cylinder. 500mL ± 2mL; cylinder height 39cm, between the upper and lower scale distance 25mL (or equivalent for the determination of dumping Down of other containers). 4.4.13.3 Test procedure Mix well enough samples, some of which will be placed in a timely manner has been weighed measuring cylinder (including plug) (accurate to 0.01g), the amount of loading Tube 8 At the plugged plug grinding mouth, placing a determined time (24h). The tap is opened, the upright position of the rotating cylinder by a 135 ° dumping 60s, then pour Set 60s, re-weighing and measuring cylinder plug (accurate to 0.01g). Would be equivalent to 80% of the cylinder volume of water (20 ℃) was poured into a measuring cylinder, stoppered plug grinding mouth, the cylinder upside down 10 times, according to the above tilting operation Pour the contents of the third and weighing cylinder plug (accurate to 0.01g). 4.4.13.4 Calculation Mass fraction and mass fraction of residue after washing the sample after pouring the residue, respectively according to formula (3) and (4) Calculated. w3 = m2-m0m1-m0 × 100 (3) w4 = m3-m0m1-m0 × 100 (4) Where. Mass fraction w3 --- sample after pouring the residue, expressed in%; Mass fraction w4 --- washed residue, expressed in%; After m2 --- dumping, quality cylinder, grinding gag and residue, in grams (g); m0 --- cylinder, quality is more important after grinding gag constant in units of grams (g); m1 --- cylinder, grinding gag and quality of the sample, in grams (g); --- Washing m3, the quality of the cylinder, grinding gag and residue, in grams (g). 4.4.14 Low temperature stability test According to GB/T 19137 in "suspended preparations" in wet sieve test still meet the standards for qualified. 4.4.15 thermal storage stability test According to GB/T 19136 in "liquid formulation" to. After the heat storage (45 ℃ ± 2 ℃) 42d nicosulfuron content should not be lower than the previous receptacles 95% suspension rate is still should meet the standard requirements for the qualification. 4.5 product testing and acceptance Product inspection and acceptance shall comply with GB/T 1604's. 5 marking, labeling, packaging, storage, security, guarantee 5.1 marking, labeling, packaging Nicosulfuron oil dispersible suspension with a clean, dry glass bottle or PET bottle packaging, bottle net content of 10mL (g), 50mL (g), 500mL (g), external corrugated cartons, each net capacity 4L, 10L or 100L, 200L vat packaging. Also available upon request or Ordering protocol uses other forms of packaging, subject to the provisions of GB 3796. 5.2 Storage Nicosulfuron oil dispersible suspension package should be stored in ventilated, dry warehouse; storage and transportation to prevent moisture and sun, not with food Material, seed, feed mix, avoid contact with skin, eyes, mouth and nose to prevent inhalation. 5.3 Security This product is moderately toxic herbicide. Are swallowed and inhaled toxic, it can penetrate through the skin. Wear protective goggles and rubber gloves when using this product Wear the necessary protective clothing. After spraying wash with soap and water. Coverage should be immediately sent to hospital symptomatic treatment. 5.4 Warranty Period Under the specified storage conditions, nicosulfuron to ensure the suspension of dispersed oil, starting from the date of manufacture of two years.

Appendix A

(Informative) Smoke Other name, structural formula and basic physicochemical parameters of ethyl The active ingredients of tobacco products other name, structural formula and basic physicochemical parameters ethyl follows. Common name. nicosulfuron ISO common name. Nicosulfuron CAS Registry Number. 111991-09-4 Chemical Name. 2- (4,6-dimethoxy-pyrimidin-2-yl-carbamoyl-sulfamoyl) -N, N- dimethyl-nicotinamide Structure. Empirical formula. C15H18N6O6S Molecular Weight. 410.4 Biological activity. Herbicides Melting point. 141 ℃ ~ 144 ℃ Vapour pressure. 1.6 × 10-11Pa (20 ℃) Solubility (25 ℃, g/kg). Water 3.59 (pH = 5 buffer solution), 12.2 (pH = 7 buffer solution), 39.2 (pH = 9 buffer solution Solution); 18 acetone; Ethanol 4.5; chloroform, dimethylformamide, 64; 23 acetonitrile; toluene, 0.37; n-hexane < 0.02; dichloromethane 160 Stability. aqueous solution at 25 ℃ about the DT50 15d (pH5), at pH7, pH9 stable.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 28155-2011_English be delivered?

Answer: Upon your order, we will start to translate GB 28155-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 28155-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB 28155-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.