|
US$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24542-2023: Fall protection - Guided type fall arrester including a rigid anchor line
Status: Valid GB 24542: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 24542-2023 | English | 609 |
Add to Cart
|
5 days [Need to translate]
|
Fall protection - Guided type fall arrester including a rigid anchor line
| Valid |
GB 24542-2023
|
| GB 24542-2009 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Personal fall protection equipment -- Guided type fall arrester including a rigid anchor line
| Obsolete |
GB 24542-2009
|
PDF similar to GB 24542-2023
Basic data | Standard ID | GB 24542-2023 (GB24542-2023) | | Description (Translated English) | Fall protection - Guided type fall arrester including a rigid anchor line | | Sector / Industry | National Standard | | Classification of Chinese Standard | C73 | | Classification of International Standard | 13.340.99 | | Word Count Estimation | 30,399 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2025-01-01 | | Older Standard (superseded by this standard) | GB 24542-2009 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 24542-2023: Fall protection - Guided type fall arrester including a rigid anchor line---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13:340:99
CCSC73
National Standards of People's Republic of China
Replace GB 24542-2009
Fall protection self-locking device with rigid guide rail
Published on 2023-12-28
Implemented on 2025-01-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical requirements 2
4:1 Design and construction 2
4:2 Assembly performance 3
4:3 Static performance 3
4:4 Dynamic performance 3
4:5 Operating condition performance 3
4:6 Reliability 3
4:7 Corrosion resistance 3
4:8 Locking performance in special environments 3
5 Test Method 4
5:1 Design and structure 4
5:2 Assembly performance 4
5:3 Static performance 5
5:4 Dynamic performance 8
5:5 Operating condition performance10
5:6 Reliability16
5:7 Corrosion resistance16
5:8 Locking performance in special environments 16
5:9 Test data processing 18
6 Inspection Rules 19
6:1 Inspection Category 19
6:2 Factory inspection 19
6:3 Type inspection 19
7 Permanent identification 19
8 Information provided by the manufacturer20
Appendix A (informative) Installation and composition diagram of self-locking device with rigid guide rail 21
Appendix B (normative) Steering gear technical requirements and test methods 23
Reference 25
Figure 1 Schematic diagram of assembly performance test 5
Figure 2 Schematic diagram of overall static performance and static performance test of buffer device 6
Figure 3 Schematic diagram of static performance test of type A blocking device 7
Figure 4 Schematic diagram of static performance test of type B blocking device 8
Figure 5 Schematic diagram of dynamic performance test 9
Figure 6 Schematic diagram of forward state performance test11
Figure 7 Schematic diagram of performance test under tilting state12
Figure 8 Schematic diagram of lateral state performance test14
Figure 9 Schematic diagram of performance test in tilted state15
Figure 10 Schematic diagram of dust test chamber 17
Figure 11 Schematic diagram of locking performance test under special environment18
Figure A:1 Installation diagram of self-locking device with rigid guide rail 21
Figure A:2 Schematic diagram of self-locking device with rigid guide rail 22
Table 1 Factory inspection requirements19
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB 24542-2009 "Self-locking device for fall protection with rigid guide rails": Compared with GB 24542-2009, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows:
a) Changed the scope (see Chapter 1, Chapter 1 of the:2009 edition);
b) Changed the definitions of self-locking device, rigid guide rail, steering gear and fall distance (see 3:1, 3:2, 3:4, 3:13, 3:2, 3:1,:2009 version)
3:3, 3:11);
c) The terms and definitions of safety rope, buffer, connecting rope, opening point, opening device and sliding distance are deleted (see the:2009 version of
3:4, 3:5, 3:7, 3:8, 3:9, 3:10);
d) Added self-locking device with rigid guide rail, buffer device, type A blocking device, type B blocking device, maximum rated load, minimum rated load
Terms and definitions of fixed load, bracket and locking distance (see 3:3, 3:5, 3:7, 3:8, 3:9, 3:10, 3:11, 3:12);
e) Change "General Provisions" and "General Requirements" to "Design and Structure" (see 4:1, 4:1 and 4:2 of the:2009 version);
f) Increased assembly performance (see 4:2);
g) Increased overall static performance (see 4:3:1);
h) Increased the static performance of the buffer device (see 4:3:2);
i) Increased the static performance of the blocking device (see 4:3:3);
j) Deleted the static load performance of guide rails (see 4:5 of the:2009 edition);
k) Change "overall dynamic load performance" to "dynamic performance" (see 4:4, 4:4 of the:2009 version);
l) Increased working condition performance (see 4:5);
m) Changed the technical requirements for "locking performance under special circumstances" (see 4:8, 4:8 in the:2009 version);
n) "Design and structure", "assembly performance", "dynamic performance" and "working condition performance" were added to the test method, and "overall static load test" was added:
Changed to "static performance" (see Chapter 5, Chapter 5 of the:2009 edition);
o) Change "logo" to "permanent logo" (see Chapter 7, 7:1 and 7:2 of the:2009 edition);
p) Added information provided by the manufacturer (see Chapter 8);
q) Added technical requirements and test methods for steering gear (see Appendix B):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the Ministry of Emergency Management of the People's Republic of China:
The previous versions of this document and the documents it replaces are as follows:
---First published in:2009 as GB 24542-2009;
---This is the first revision:
Fall protection self-locking device with rigid guide rail
1 Scope
This document specifies the technical requirements, permanent marking and information provided by the manufacturer of self-locking devices with rigid guide rails:
Test methods and inspection rules for self-locking devices:
This document applies to self-locking devices with rigid guide rails installed within an angle of 15° from the vertical:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB 6095 Fall protection safety belt
GB/T 10125 Artificial atmosphere corrosion test salt spray test
GB/T 23469 Fall protection connector
GB 38454 Fall protection horizontal lifeline device
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
It is attached to the guide rail and can slide along the guide rail as the user moves, triggering a braking effect when falling:
3:2
rigid guide railrigidanchorline
Use metal brackets and other devices to be fixed on ladders or other structures at certain intervals, and are rigid components used for attaching and sliding self-locking devices:
Note: The self-locking device slides on the rigid guide rail and can be locked on the rigid guide rail in the event of a fall:
3:3
The component consisting of self-locking device (3:1) and rigid guide rail (3:2) is part of the fall protection system:
Note: The self-locking device and rigid guide rail are tested, confirmed and used as a whole: See Appendix A for the installation and composition diagram:
3:4
deflector deflector
A component connected to the rigid guide rail (3:2) that can change the movement direction of the self-locking device (3:1):
3:5
Part of the self-locking device (3:1) with rigid guide rail (3:2) that absorbs impact energy:
3:6
connectorconnectingelement
A component with a normally closed valve that connects and separates the various components of the falling system:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24542-2023_English be delivered?Answer: Upon your order, we will start to translate GB 24542-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 24542-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB 24542-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 24542-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 24542-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|