GB 23468: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 23468-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Selection, use and maintenance of fall protection equipments
| Valid |
GB 23468-2025
|
| GB/T 23468-2009 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Code of practice for safety use of fall protection equipment
| Valid |
GB/T 23468-2009
|
Basic data | Standard ID | GB 23468-2025 (GB23468-2025) | | Description (Translated English) | Selection, use and maintenance of fall protection equipments | | Sector / Industry | National Standard | | Date of Implementation | 2026-09-01 | | Older Standard (superseded by this standard) | GB/T 23468-2009 | GB/T 23468-2009: Code of practice for safety use of fall protection equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Code of practice for safety use of fall protection equipments
ICS 13.340.99
C73
National Standards of People's Republic of China
Fall Protection Equipment Safety Specification
Posted 2009-04-01
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Appendix A of this standard is a normative appendix, Appendix B is an informative annex.
This standard was proposed by the State Administration of Work Safety.
This standard is under the jurisdiction of the National Technical Committee of Standardization for Personal Protective Equipment.
This standard is drafted by. Beijing Labor Protection Institute of Science.
Participated in the drafting of this standard. Beijing Construction Engineering Quality Supervision Station safety.
The main drafters of this standard. Yang Wenfen, Chen Cho, for Wei Jixiang, Zhao Hong Qi, Luo Muxia, Lu Wei.
Fall Protection Equipment Safety Specification
1 Scope
This standard specifies the safety net, seat belts and other fall protection equipment with requirements, safety requirements, life, periodic inspection requirements
And identity management requirements.
This standard applies to work at heights, climbing and safety nets suspended operations used, seat belts and other fall protection equipment.
This standard does not apply to sports, fire and other uses of fall protection equipment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3608-2008 high job rating
GB 5725 Safety Net
GB 6095 belts
GB/T 12903 Personal Protective Equipment term
3 Terms and Definitions
GB/T 12903 and established in the following terms and definitions apply to this standard.
3.1
Workers in high places to prevent the occurrence of a fall or a fall occurs when a job is hanging in the air safety personnel protective equipment.
Note. The seat belt according to the functions are divided into general operations around the rod belt, the area limiting safety belts and seat belt hanging falling.
3.2
By around on a fixed member of a rope or tape bound around the body member, so that the hands of the operator to perform other operations
seat belt.
3.3
To limit the scope of activities of the worker, in order to avoid falling arrive belt area may occur.
NOTE. regional restrictions belt generally consists of the positioning device, rope, lace composition.
3.4
When high places or climb personnel fall occurs, security personnel will be hanging in the air belt.
3.5
Tie a long rope (tape, rope) between the belt and hanging points in the seat belt.
NOTE. The safety rope usually acts to expand or limit the scope of activities of the wearer, the absorption of impact energy.
|