|
US$564.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14536.19-2017: Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements
Status: Valid GB/T 14536.19: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14536.19-2017 | English | 564 |
Add to Cart
|
3 days [Need to translate]
|
Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements
| Valid |
GB/T 14536.19-2017
|
| GB 14536.19-2006 | English | RFQ |
ASK
|
4 days [Need to translate]
|
[GB/T 14536.19-2006] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements
| Obsolete |
GB 14536.19-2006
|
PDF similar to GB/T 14536.19-2017
Basic data | Standard ID | GB/T 14536.19-2017 (GB/T14536.19-2017) | | Description (Translated English) | Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K32 | | Classification of International Standard | 97.120 | | Word Count Estimation | 30,350 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Older Standard (superseded by this standard) | GB/T 14536.19-2006 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 14536.19-2017: Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Automatic electrical controls for household and similar use - Particular requirements for electrically operated gas valves, including mechanical requirements
ICS 97.120
K32
National Standards of People's Republic of China
Replacing GB/T 14536.19-2006
Household and similar electrical automatic controllers
Electric gas valve special requirements, including mechanical requirements
(IEC 60730-2-17.2007, Automaticelectricalcontrolsforhouseholdandsimilaruse-
Part 2-17. Particularrequirementsforelectricalyoperatedgasvalves,
includingmechanicalrequirements, IDT)
2017-12-29 published.2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Definition 2
3 General requirements 4
4 General description of the test 5
5 rating 5
6 Categories 5
7 logo 7
8 documents 9
9 mechanical requirements 9
10 terminals and ends 9
11 Structural requirements 9
12 moisture and dust 13
Electrical strength and insulation resistance 13
14 fever 13
15 Manufacturing Bias and Drift 14
Environmental Stress 14
Durability 14
Mechanical strength 15
19 Threaded Parts and Connections 16
20 Creepage distance, clearance and distance through solid insulation 16
21 heat, flame and tracking marks 16
Corrosion resistance 16
Electromagnetic compatibility (EMC) requirements --- launch 16
24 components
25 normal operation 17
Electromagnetic compatibility (EMC) requirements --- Immunity 17
27 abnormal operation 17
28 Guidelines for the Use of Electrical Disconnections 18
Appendix 20
Appendix H (normative) electronic controller requirements 21
Foreword
GB/T 14536 "Household and similar electrical automatic controller" is divided into the following two parts.
--- The first part. General requirements (GB/T 14536.1);
--- The second part, special requirements, including.
--- Particular requirements for thermal motor protectors (GB/T 14536.3);
Particular requirements for thermal protectors for tube fluorescent lamp ballasts (GB/T 14536.4);
Particular requirements for motor thermal protectors for hermetic and semi - hermetic motor compressors (GB/T 14536.5);
--- Burner electric automatic control system of the special requirements (GB/T 14536.6);
Particular requirements for pressure sensitive electrical automatic controllers (GB/T 14536.7);
--- Timer and timer switch special requirements (GB/T 14536.8);
--- Electric valve special requirements, including mechanical requirements (GB/T 14536.9);
--- Particular requirements for temperature-sensitive controller (GB/T 14536.10);
--- Particular requirements for motor starting relays (GB/T 14536.11);
--- Particular requirements for energy regulators (GB/T 14536.12);
--- Special requirements for electric door locks (GB/T 14536.13);
--- Humidity sensitive controller of the special requirements (GB/T 14536.15);
--- Particular requirements for electric starter (GB/T 14536.16);
--- Float-type or electrode-sensitive water level-sensitive automatic controllers used in boiler appliances
(GB/T 14536.17);
--- Particular requirements for household and similar applications float type water level controller (GB/T 14536.18);
--- Electric gas valve special requirements, including mechanical requirements (GB/T 14536.19);
Particular requirements for flow and air flow sensitive controls, including mechanical requirements (GB/T 14536.20);
--- Electric oil valve special requirements, including mechanical requirements (GB/T 14536.21).
This section GB/T 14536.19.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 14536.19-2006 "Household and similar electrical automatic controllers electric gas valve special requirements, including
Mechanical requirements. "
This section compared with GB/T 14536.19-2006, the main technical changes are as follows.
--- Increased range "At the same time, but also can be extended for no special standards, industrial products, such as for central heating, air conditioning, technology plus
Heat and so on. (See 1.1.1) ";
--- Normative references deleted GB 4706.1-1998, GB 4208-1993, GB 15092.1-2003, "GB 14536.16-
2000 Household and similar electrical automatic controller electric starter special requirements (idtIEC 60730-2-14.1995) "to
Automatic electrical controls for household and similar use - Particular requirements for electric starters (IEC 60730-2-14.
2008, IDT) "and" ISO 228-1.1994 "to" ISO 228-1.2000 "(see 1.5);
--- Definition adds "2.3.103.1 latch semi-automatic normally open valve" "2.3.103.2 automatic normally open valve" two definitions (see Chapter 2);
--- According to use classification add "6.3.12.103.1 automatic normally open valve, 6.3.12.103.2 semi-automatic with latch open valve" (see 6.3);
--- Classification increased by "6.104 classification by sealing force" (see Chapter 6);
--- Table 7.2 adds 118 "Levels A, B, C, D, E or J of valves in CEN member states" (see Chapter 7);
--- 11.103 Detection method to increase "with or without gas to the maximum working pressure connected to the valve inlet, whichever is more unfavorable
Condition "and add a comment" The 15% value is based on the remanence, friction and possibly generated by the control and signaling circuits in the normally closed valve
The residual current can affect the closing force to determine. ";
--- Chapter 11 increased by 11.116;
--- 14.4.101 Amend to read as follows. "If the electric drive shaft is blocked during normal operation, it should be stable under blocking condition
After setting the temperature measurement, the measured temperature should meet the requirements of Table 14.1. In addition, if locked in the state, the electricity
Actuator protection device no action, then that the electric starter is in line with the requirements of 27.2.101 ";
--- 14.4.102 Amend to read as follows. "If the electric drive shaft does not stall during normal operation, the limits in Table 14.1 do not apply to stalling
Happening. Electric starter shall comply with the requirements of 27.2.101 ";
--- "Creepage distances, Clearances and through the" chapter entitled "Creepage distance, Clearance and clearance through solid insulation"
(See Chapter 20);
--- "Radio interference suppression" chapter entitled "Electromagnetic compatibility (EMC) requirements --- Launch" (see Chapter 23);
--- Chapter 26 changed to "Electromagnetic Compatibility (EMC) requirements --- Immunity This chapter GB/T 14536.1 applies.";
--- Non-normal operation to increase "27.2 burning test" "27.3 over-voltage and under-voltage test" (see Chapter 27);
--- "Electronic Disconnection Guide" chapter read "GB/T 14536.1 of this chapter apply." (See Chapter 28);
--- Change the name of "Operation under Power Interference, Magnetic Interference and Electromagnetic Interference" to "Electromagnetic Compatibility (EMC) Requirements --- Immunity"
(See H.26);
--- "Electrostatic discharge test" has been modified (see H.26.11);
--- "Electromagnetic Field Immunity" has been modified (see H.26.12);
--- In many provisions of the "in Europe" changed to "in the CENELEC member states."
This section uses the translation method is equivalent to using IEC 60730-2-17.2007 (Ed1.2) "Household and similar electrical automatic controller 2-
Part 17 - Particular requirements for electric gas valves, including mechanical requirements ".
The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows.
--- GB/T 7306.1-2000 55 ° sealing pipe thread Part 1. Cylindrical and tapered male thread (eqvISO 7-1.
1994);
--- GB/T 7306.2-2000 55 ° sealing pipe thread Part 2. Cone and conical male thread (eqvISO 7-1.
1994);
--- GB/T 7307-2001 55 ° non-sealed pipe thread (eqvISO 228-1.1994);
--- GB/T 17241.1-1998 cast iron pipe flange type (eqvISO 7005.2.1988);
--- GB/T 17241.2-1998 cast iron pipe flange cover (eqvISO 7005.2.1988);
--- GB/T 17241.3-1998 with a threaded male pipe flange (eqvISO 7005.2.1988);
--- GB/T 17241.4-1998 with flat neck welding and neck socket welding cast iron pipe flange (eqvISO 7005.2.1988);
--- GB/T 17241.5-1998 pipe end flange necked loose cast iron pipe flange (eqvISO 7005.2.1988);
--- GB/T 17241.6-2008 whole cast iron flange (eqvISO 7005.2.1988);
--- GB/T 17241.7-1998 cast iron pipe flanges technical conditions (eqvISO 7005.2.1988).
For ease of use, this section made the following editorial changes.
--- Standard title of the deletion of "Part 2-17.", "Household and similar electrical automatic control valve electric gas valve special
Requirements, including mechanical requirements. "
This part is proposed by China Electrical Equipment Industry Association.
This part of the National Automatic Control Standardization Technical Committee (SAC/TC212) centralized.
This section is responsible for the drafting unit. Ningbo Yahui Intelligent Technology Co., Ltd., China Electric Apparatus Research Institute Co., Ltd., Wuhu Kowloon Control
Co., Ltd., Anhui Shun Hao Electrical Manufacturing Co., Ltd., Xi'an cloud extension Electric Co., Ao Si Smith (China) Water Heater Co., Ltd.
Division, Jiangsu Fu Lande Electric Co., Ltd., Wei Kai Detection Technology Co., Ltd., Xiamen Industry Sheng Electric Co., Ltd.
Participated in the drafting of this section. Anhui Xinghui Industrial Technology Co., Ltd., Anhui excellence Electric Equipment Co., Ltd., Chaohu Silver Ring beacon
Co., Ltd., Guangdong CEC Industrial and Household Appliances Productivity Promotion Center Co., Ltd., Zhejiang Dunan Hetian Metal Co., Ltd. Zhejiang
Jiang Yan in the thermostat Co., Ltd., Zhejiang Weijia Si Machinery Co., Ltd., Yueqing City, Chi Electric Co., Ltd., Yueqing precision electronic machine
Electric Industrial Co., Ltd., Xuzhou Ruoxin Intelligent Technology Co., Ltd., Xiamen Yangmai Electric Co., Ltd., Shaanxi Ze Qin Industrial Co., Ltd.,
Gas Co., Ltd.
The main drafters of this section. Kong Ruixun, Zhang Chi, Qian Feng, Lin Peng Xiang, Zhuzhou Yang, Li Ting, Zheng Haifeng, Wan Wah new, Du Li,
Zhu Shanghui, Zhao Jianping, Xu Yujun, Wang Xiangrong, Chen Yonglong, Zhang Xiangzhong, Yi Zhonghui, Li Ji, Ni Zan, Chen Geng, Liu Peng, Ran Jun.
This part replaces the standards previously issued as.
--- GB/T 14536.19-2006.
Household and similar electrical automatic controllers
Electric gas valve special requirements, including mechanical requirements
1 Scope
GB/T 14536.1 of this chapter with the following content instead.
instead.
1.1 This section applies to household and similar equipment or with the use of these devices with electric gas valves, these devices use electricity and
Gaseous fuels, such as the combination of artificial gas, natural gas and liquefied petroleum gas intended for use in gas burning equipment.
Note. Consideration of corrosive gas if necessary.
This section also applies to the use of NTC and PTC thermistor electric gas valve, their additional requirements are included in Appendix J.
1.1.1 This section applies to the inherent safety of electric gas valve for operating safety-related equipment values, operating time and operating procedures
And for the testing of electric gas appliances that are intended to be used in or with household or similar equipment. At the same time, can also be expanded
Exhibition for no special standards, industrial products, such as for central heating, air conditioning, process heating and so on.
This section also applies to the use of the device within the scope of GB 4706.1 controller.
NOTE The term "equipment" as used in this section includes "appliances and equipment".
This section does not apply specifically for industrial use electric gas valve.
For non-ordinary household but may still be used in public places, such as for shops, light industrial factories and non-professionals in the farm use
Equipment, the electric gas valve is also included in the scope of this section.
This section defines a lot of as "under consideration" of the mechanical properties. In the use of this section should determine these requirements, until these machines
Requirements are incorporated into this section.
Electric gas valves meeting the requirements of this section still require further testing of the valve's mechanical properties.
1.1.2 This section applies to those who are electrically and/or mechanically combined with the electric gas valve manual controller.
NOTE The requirements for a manual switch that does not form part of an electric gas valve are contained in GB/T 15092.1.
This section does not apply to the nominal connection size exceeds DN150 electric gas valve.
This section applies to the maximum working pressure up to 400kPa (4bar) electric gas valve.
In the following, the term "valve" refers to an electric gas valve (including a prime mover and a valve body).
1.1.3 submitted to the laboratory, with the gas valve electric starter requirements included in this section. Independent electric starter
Requirements included in GB/T 14536.16, GB/T 14536.16 gives the electrical starter special requirements.
1.1.4 This section also applies to valves that are part of a system or that are mechanically combined with a multi-function controller.
1.1.5 This section does not apply to the thermocouple inserted by the gas flame or thermopile generated by the thermoelectric energy valve.
1.2 Vacancies.
1.3 Not applicable.
1.4 vacancy.
1.5 Normative references
GB/T 14536.1 This chapter applies except as follows.
increase.
Automatic electrical controls for household and similar use - Particular requirements for electric starters (IEC 60730-2-14.
2008, IDT)
ISO 7-1.1994 Sealing Pipe Threads Part 1. Dimensions, Tolerances and Designations (Pipethreadswherepressure-tight
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14536.19-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 14536.19-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14536.19-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14536.19-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14536.19-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14536.19-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|