GB 14536.16-2013 PDF in English
GB 14536.16-2013 (GB14536.16-2013) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB 14536.16-2013 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
[GB/T 14536.16-2013] Automatic electrical controls for household and similar use -- Particular requirements for electric actuators
| Valid |
| GB 14536.16-2000 | English | 599 |
Add to Cart
|
3 days
|
Automatic electrical controls for household and similar use-Particular requirements for electric actuators
| Obsolete |
Standards related to (historical): GB 14536.16-2013
PDF Preview
GB 14536.16-2013: PDF in English GB 14536.16-2013
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 97.120
K 32
GB 14536.16-2013 / IEC 60730-2-14:2008 (Ed 1.2)
Replacing GB/T 14536.16-2000
Automatic Electrical Controls for
Household and Similar Use -
Particular Requirements for Electric Actuators
[IEC 60730-2-14: 2008 (Ed 1.2), IDT]
ISSUED ON: DECEMBER 17, 2013
IMPLEMENTED ON: NOVEMBER 14, 2014
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 4
1 Scope and normative references ... 7
2 Definitions ... 8
3 General requirements ... 9
4 General notes on tests ... 9
5 Rating ... 9
6 Classification ... 10
7 Information ... 11
8 Protection against electric shock ... 12
9 Provision for protective earthing ... 12
10 Terminals and terminations ... 12
11 Constructional requirements ... 12
12 Moisture and dust resistance ... 12
13 Electric strength and insulation resistance ... 13
14 Heating ... 13
15 Manufacturing deviation and drift ... 14
16 Environmental stress ... 14
17 Endurance ... 14
18 Mechanical strength ... 14
19 Threaded parts and connections ... 15
20 Creepage distances, clearances and distances through solid insulation 15
21 Resistance to heat, fire and tracking ... 15
22 Resistance to corrosion ... 15
23 Electromagnetic compatibility (EMC) requirements - Emission ... 15
24 Components ... 15
25 Normal operation ... 15
26 Electromagnetic compatibility (EMC) requirements - Immunity ... 15
27 Abnormal operation ... 16
28 Guidance on the use of electronic disconnection ... 17
Annex D (informative) Heat, fire and tracking ... 19
Annex H (normative) Requirements for electronic controls ... 20
Foreword
All the technical content of this Part is compulsory.
GB 14536, Automatic Electrical Controls for Household and Similar Use, comprises
two parts as follows:
-- Part 1: General Requirements;
-- Part 2: Particular Requirements.
Particular Requirements consist of the parts as follows:
-- GB 14536.3, Particular Requirements for Thermal Motor Protectors (IEC 60730-
2-2, IDT);
-- GB 14536.4, Particular Requirements for Thermal Protectors for Ballasts for
Tubular Fluorescent Lamps (IEC 60730-2-3, IDT);
-- GB 14536.5, Particular Requirements for Thermal Motor Protectors for Motor-
Compressors of Hermetic and Semi-hermetic Type (IEC 60730-2-4, IDT);
-- GB 14536.6, Particular Requirements for Automatic Electrical Burner Control
Systems (IEC 60730-2-5, IDT);
-- GB 14536.7, Particular Requirements for Automatic Electrical Pressure Sensing
Controls Including Mechanical Requirements (IEC 60730-2-6, IDT);
-- GB 14536.8, Particular Requirements for Timers and Time Switches (IEC 60730-
2-7, IDT);
-- GB 14536.9, Particular Requirements for Electrically Operated Water Valves
Including Mechanical Requirements (IEC 60730-2-8, IDT);
-- GB 14536.10, Particular Requirements for Temperature Sensing Controls (IEC
60730-2-9, IDT);
-- GB 14536.11, Particular Requirements for Motor-Starting Relays (IEC 60730-2-
10, IDT)
-- GB 14536.12, Particular Requirements for Energy Regulators (IEC 60730-2-11,
IDT);
-- GB 14536.13, Particular Requirements for Electrically Operated Door Locks (IEC
60730-2-12, IDT);
-- GB 14536.15, Particular Requirements for Humidity Sensing Controls (IEC
60730-2-13, IDT);
-- GB 14536.16, Particular Requirements for Electric Actuators (IEC 60730-2-14,
IDT);
-- GB 14536.17, Particular Requirements for Automatic Electrical Water Level
Sensing Controls of the Float or Electrode-sensor Type Used in Boiler
Applications (IEC 60730-2-15, IDT);
-- GB 14536.18, Particular Requirements for Automatic Electrical Water Level
Controls of the Float Type for Household and Similar Applications (IEC 60730-2-
16, IDT);
-- GB 14536.19, Particular Requirements for Electrically Operated Gas Valves
Including Mechanical Requirements (IEC 60730-2-17, IDT);
-- GB 14536.20, Particular Requirements for Automatic Electric Water and Air Flow
Sensing Controls Including Mechanical Requirements (IEC 60730-2-18, IDT);
-- GB 14536.21, Particular requirements for electrically operated oil valves including
mechanical requirements (IEC 60730-2-19, IDT);
This Part is GB 14536.16. This Part shall be used in conjunction with GB 14536.1-
2008, Automatic Electrical Controls for Household and Similar Use - Part 1: General
Requirements.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB 14536.16-2000, Particular Requirements for Electric Actuators.
The major changes of this Part compared with GB 14536.16-2000 are as follows:
1) IEC Foreword is deleted;
2) 6.1.1 of Clause 6 was “delete two explanatory paragraphs”; and not it is added
with “AC controls”. 6.3.102 is the newly-added content;
3) 7.3.1 of Clause 7 is the newly-added content;
4) the newly added content applies to the figures in GB 14536.1;
5) the modifications of the requirements of Annex H: the newly-added content
includes H.11, H.11.12, H.11.12.8, H.11.12.8.1, H.26.1, H.26.5.3, H.26.5.3.101,
H.26.8, H.26.8.3, H.26.9.3, H.26.9.3.101, H.26.13.3, H.26.13.3.101, H.26.14,
H.26.14.3, H.26.14.3.101, H.26.15.4; the deleted content includes H.26.4,
H.26.5.4, H.26.5.4.101, H.26.7, H.26.9, H.26.9.101, H.26.11; and H.26.13 is
changed from the former “conformity assessment” into the “test of influence of
supply frequency variations”.
This Part equivalently adopts International Electrotechnical Commission IEC 60730-2-
14, Automatic Electrical Controls for Household and Similar Use - Part 2-14: Particular
Requirements for Electric Actuators (Edition 1.2, 2008), using the method of translation
etc.
The structure of this Part is the same as that of IEC 60730-2-14:2008. In this Part, if
there is a corresponding national standard, refer to the national standard; and if there
is no national standard for the time being, refer to the IEC standard listed.
For the convenience of use, the following editorial modifications are made in this Part:
a) the words “this Standard” is changed into “this Part”;
b) the decimal point “.” is used to replace the comma “,” that is acted as the decimal
point;
c) the foreword of the national standard is added.
This Part was proposed by China Electrical Equipment Industrial Association.
This Part shall be under the jurisdiction of the National Technical Committee 212 on
Automatic Controls of Standardization Administration of China (SAC/TC 212).
The drafting organizations of this Part: Guangzhou Vkan Certification and Testing Co.,
Ltd., Zhejiang Dunan Artificial Environment Co., Ltd., Wuhu Jiulong Controls Co., Ltd.,
Hisense-Kelon Electrical Co., Ltd., China National Electric Apparatus Research
Institute Co., Ltd., Jiangsu Changheng Group Automatic Controls Co., Ltd., Hangzhou
Star Shuaier Electric Appliance Co., Ltd., Zhejiang Sanhua Holding Group Co., Ltd.,
Shenzhen CHK Electronics Co., Ltd., Ningbo Ouzhi Electrical Technology Co., Ltd.,
Guangdong Testing Institute of Product Quality Supervision.
The main drafters of this Part: Lin Yongming, Wang Xiangrong, Zhu Zhouyang, Du Li,
Qian Feng, Yuan Ze, Kong Ruixun, Song Zhihong, Wu Minan, Lu Wencheng, Xie
Ronghua, Ke Cilong, Xiao Li.
The previous edition of the standard replaced by this Part is as follows:
-- GB 14536.16-2000.
Automatic Electrical Controls for
Household and Similar Use -
Particular Requirements for Humidity Sensing Controls
1 Scope and normative references
This clause of GB 14536.1 is applicable except as follows:
1.1 Replacement:
This Part applies to electric actuators for use in, on, or in association with equipment
for household and similar use for heating, air-conditioning and ventilation. The
equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a
combination thereof.
This Part applies to electric actuators using NTC or PTC thermistors, additional
requirements for which are contained in annex J.
1.1.1 This Part applies to the inherent safety, to the operating values, operating times
and operating sequences where such are associated with equipment safety and to the
testing of electric actuators used in, on or in association with, equipment for household
and similar use for heating, air-conditioning and ventilation.
NOTE 1 Requirements for specific operating values, operating times and operating
sequences may be given in the standards for appliances and equipment.
NOTE Throughout this Part the word "equipment" means "appliance and equipment".
Electric actuators for equipment not intended for normal household use, but which
nevertheless may be used by the public, such as equipment intended to be used by
laymen in shops, in light industry and on farms, are within the scope of this Part.
This Part does not apply to electric actuators designed exclusively for industrial
applications.
This Part does not apply to electric actuators which are mechanically integral with
valves.
NOTE See GB 14536.9, Particular requirements for electrically operated valves, including
mechanical requirements and GB 14536.19, Particular requirements for electrically
operated gas valves.
This Part does not apply to electric motors, requirements for which are contained in
IEC 60034.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|