|
US$699.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 12664-2024: General technical requirements for portable X-ray security inspection equipment
Status: Valid GB 12664: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 12664-2024 | English | 699 |
Add to Cart
|
7 days [Need to translate]
|
General technical requirements for portable X-ray security inspection equipment
| Valid |
GB 12664-2024
|
| GB 12664-2003 | English | 569 |
Add to Cart
|
5 days [Need to translate]
|
General specification for portable X-ray security inspection equipment
| Valid |
GB 12664-2003
|
| GB 12664-1990 | English | 679 |
Add to Cart
|
5 days [Need to translate]
|
Specification for portable X-Ray security inspect equipment
| Obsolete |
GB 12664-1990
|
PDF similar to GB 12664-2024
Basic data | Standard ID | GB 12664-2024 (GB12664-2024) | | Description (Translated English) | General technical requirements for portable X-ray security inspection equipment | | Sector / Industry | National Standard | | Classification of Chinese Standard | A91 | | Classification of International Standard | 13.310 | | Word Count Estimation | 35,352 | | Date of Issue | 2024-08-23 | | Date of Implementation | 2025-09-01 | | Older Standard (superseded by this standard) | GB 12664-2003 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 12664-2024: General technical requirements for portable X-ray security inspection equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.310
CCSA91
National Standard of the People's Republic of China
Replace GB 12664-2003
Technical Specifications for Portable X-ray Security Inspection Equipment
Released on 2024-08-23
2025-09-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Equipment Classification 2
5 Technical Requirements 2
6 Test methods 7
7 Inspection Rules 12
8 Marking and instruction manual 14
Appendix A (Normative) Image Index Test Body 16
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB 12664-2003 "General Specification for Portable X-ray Safety Inspection Equipment" and is consistent with GB 12664-2003.
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
--- Changed the scope (see Chapter 1, Chapter 1 of the.2003 edition);
--- Added some terms. test body, X-ray generating device (see 3.2, 3.3);
--- Changed the definition of one term. portable X-ray security inspection equipment (see 3.1, 3.1 of the.2003 edition);
--- Deleted 1 term. working position (see 3.2 of the.2003 edition);
--- Added equipment classification (see Chapter 4);
--- Changed the appearance requirements (see 5.1.1, 4.1 of the.2003 edition);
--- Changed the equipment structure (see 5.1.2, 4.2.1 of the.2003 edition);
--- Changed the enclosure protection level (see 5.1.3, 4.2.2 of the.2003 edition);
--- Increased the effective imaging area (see 5.1.8);
--- Changed the radiation control device (see 5.6.1, 4.3.1 of the.2003 edition);
--- Changed the operation of the control device (see 5.2.1, 4.3.2 of the.2003 edition);
--- Changed remote control (see 5.2.2, 4.3.3 of the.2003 edition);
--- Changed the power adaptability (see 5.3, 4.5 of the.2003 edition);
--- Added battery power supply (see 5.3.2);
--- Changed electrical safety (see 5.4, 5.5, 4.6 of the.2003 edition);
--- Changed the radiation protection requirements (see 5.6, 4.7 of the.2003 edition);
--- Added functional requirements (see 5.7);
--- Changed the performance requirements (see 5.8, 4.8 of the.2003 edition);
--- Increased the safety of X-ray generating devices (see 5.9);
--- Changed environmental adaptability (see 5.10, 4.10 of the.2003 edition);
--- Changed electromagnetic compatibility (see 5.11, 4.11 of the.2003 edition);
--- Changed the identification (see 8.1.1, 4.4 of the.2003 edition);
--- Added normative appendix (see Appendix A);
--- Deleted the normative appendix (see Appendix B of the.2003 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the Ministry of Public Security of the People's Republic of China.
The previous versions of this document and the documents it replaces are as follows.
--- First issued as GB 12664-1990 in.1990 and first revised in.2003;
---This is the second revision.
Technical Specifications for Portable X-ray Security Inspection Equipment
1 Scope
This document specifies the classification, technical requirements, marking, and operating instructions of portable X-ray security inspection equipment and describes the corresponding test
The inspection method was established and the inspection rules were established.
This document applies to the design, manufacture and inspection of portable X-ray security inspection equipment.
This document does not apply to portable X-ray security inspection equipment based on X-ray backscatter technology.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature
GB/T 2423.3-2016 Environmental testing Part 2.Test method Test Cab. Steady state damp heat test
GB/T 2423.5-2019 Environmental testing Part 2.Test method Test Ea and guidance. Impact
GB/T 2423.10-2019 Environmental testing Part 2.Test methods Test Fc. Vibration (sinusoidal)
GB/T 4208-2017 Enclosure protection degree (IP code)
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1.General requirements
GB 15208.1-2018 Microdose X-ray security inspection equipment Part 1.General technical requirements
GB 15208.2-2018 Micro-dose X-ray security inspection equipment Part 2.Transmission baggage security inspection equipment
GB 16796-2022 Safety requirements and test methods for security alarm equipment
GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.3-2023 Electromagnetic compatibility test and measurement technology Part 3.Radio frequency electromagnetic field radiation immunity test
GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test
GB/T 17626.5-2019 Electromagnetic compatibility test and measurement technology surge (impact) immunity test
GB/T 17626.6-2017 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity
GB/T 17799.1-2017 General standard for electromagnetic compatibility Immunity in residential, commercial and light industrial environments
GB 31241 Safety technical specification for lithium-ion batteries and battery packs for portable electronic products
3 Terms and definitions
The terms and definitions defined in GB 15208.1-2018, GB 15208.2-2018 and the following apply to this document.
3.1
A device that uses the penetrating properties of X-rays to conduct on-site safety inspections and whose entire structure or its components can be directly carried.
3.2
Test block
Test objects used to test and evaluate the performance indicators of X-ray images.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 12664-2024_English be delivered?Answer: Upon your order, we will start to translate GB 12664-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 12664-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 12664-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 12664-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 12664-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|