|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GA/T 1670-2019: Forensic sciences--General technical specifications for comparison microscopes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA/T 1670-2019 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Forensic sciences--General technical specifications for comparison microscopes
| Valid |
GA/T 1670-2019
|
PDF similar to GA/T 1670-2019
Basic data | Standard ID | GA/T 1670-2019 (GA/T1670-2019) | | Description (Translated English) | Forensic sciences--General technical specifications for comparison microscopes | | Sector / Industry | Public Security (Police) Industry Standard (Recommended) | | Classification of Chinese Standard | A92 | | Classification of International Standard | 13.310 | | Word Count Estimation | 10,153 | | Date of Issue | 2019 | | Date of Implementation | 2019-12-01 | | Issuing agency(ies) | Ministry of Public Security | GA/T 1670-2019: Forensic sciences--General technical specifications for comparison microscopes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Forensic sciences--General technical specifications for comparison microscopes
ICS 13.310
A92
Public Safety Industry Standards of the People's Republic of China
General technical requirements for forensic scientific comparison microscopes
Published on October 14,.2019
2019-12-01 Implementation
Issued by the Ministry of Public Security of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the National Criminal Technology Standardization Technical Committee Criminal Technical Products Sub-Technical Committee (SAC/TC179/SC8)
And put it together.
This standard was drafted by. Wuhu Wanjiang Photoelectric Instrument Co., Ltd. and the Center for Physical Evidence Appraisal of the Ministry of Public Security.
The main drafters of this standard. Ren Yong, Li Lei, Lu Liang, Zhong Lijing, Li Xiuming.
General technical requirements for forensic scientific comparison microscopes
1 Scope
This standard specifies the basic parameters, general requirements, test methods, inspection rules, signs, packaging, transportation and
Storage.
This standard applies to optical comparison microscopes with two object-side fields of view and dual optical paths.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1.General requirements
GB/T 9246-2008 microscope eyepiece
GB/T 13384-2008 General technical requirements for packaging of electromechanical products
GB/T 19863-2005 Test method of stereo microscope
GB/T 19864.2-2013 Stereo microscope Part 2.High-performance stereo microscope
JB/T 9329-1999 Basic environmental conditions and test methods of instrumentation transportation, transportation and storage
3 Basic parameters
The technical parameters of the forensic scientific comparison microscope (hereinafter referred to as the comparison microscope) shall comply with the provisions of Table 1.
Table 1 Basic parameters
Basic parameter specifications
Connection size of eyepiece and lens tube ϕ23.2mm F8/h8, ϕ30mm (30.5mm) F8/h8
There is no difference between the left and right magnifications when the left and right objective magnifications are visually observed (same as the ruler scale)
Left and right stage linkage with left and right direction and up and down direction
The range of the focusing mechanism (effective movement in the three directions of the stage X, Y, Z) is not less than 45mm
Eyepiece magnification is selected according to GB/T 9246-2008
The adjustment range of the binocular pupillary distance when observed with 10× eyepieces is that the minimum pupil distance is not greater than 55mm and the maximum is not less than 75mm
Eyepiece diopter adjustment range (diopter) 4D~-6D
4 General requirements
4.1 Appearance
4.1.1 There should be no peeling, spots and uneven coloring on the electroplated surface.
4.1.2 The color of the paint surface is uniform, and there should be no paint stripping, damage marks and defects that hinder the appearance.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GA/T 1670-2019_English be delivered?Answer: Upon your order, we will start to translate GA/T 1670-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GA/T 1670-2019_English with my colleagues?Answer: Yes. The purchased PDF of GA/T 1670-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|