|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 95022-2015: Starching, cutting and selvedge sucking devices
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 95022-2015 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Starching, cutting and selvedge sucking devices
| Valid |
FZ/T 95022-2015
|
PDF similar to FZ/T 95022-2015
Basic data | Standard ID | FZ/T 95022-2015 (FZ/T95022-2015) | | Description (Translated English) | Starching, cutting and selvedge sucking devices | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W95 | | Classification of International Standard | 59.120.50 | | Word Count Estimation | 6,646 | | Date of Issue | 2015-07-14 | | Date of Implementation | 2016-01-01 | | Quoted Standard | GB/T 191; GB/T 230.1-2009; GB/T 17780.7; FZ/T 90001; FZ/T 90074 | | Regulation (derived from) | PRC MIIT Announcement (2015 No.49) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the pulp, cut, suction side device parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This Standard applies to textile finishing equipment, into the fabric at the edges of the fabric sizing, trimming cloth when the suction side of the generic device. | FZ/T 95022-2015: Starching, cutting and selvedge sucking devices---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Starching, cutting and selvedge sucking devices
ICS 59.120.50
W95
People's Republic of China textile industry standards
Paste, cut, edge suction device
Issued on. 2015-07-14
2016-01-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee mechanical accessory spinning, dyeing and finishing of textile machinery and Technical Committee (SAC/TC215/SC1)
Centralized.
This standard was drafted. Jiangsu Little Sun Machinery Co., Ltd., Jiangsu Jianye Machinery Manufacturing Co., the National Textile Machinery Quality
Supervision and Inspection Center, Jinjiang City of Fujian Ji Long Machinery Industrial Co., Ltd., Taicang City in Long Nonwoven Engineering Co., Ltd., Jiang Su Yingyang no textile machinery
Armed Ltd., Shaoyang Textile Machinery Co., Ltd.
The main drafters. Zhang Nan before, Wang Jiqing, Li Liping, Chen Jinping, Fan Zhen, Li Fan Yuan, Lin Jian, Zhou Yan.
Paste, cut, edge suction device
1 Scope
This standard specifies the pulp, cut, edge suction device parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to textile finishing equipment, when into the fabric of the cloth edges sizing, trimming cloth when the suction side of the generic device.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 230.1-2009 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K,
N, T scale)
GB/T 17780.7 Textile machinery - Safety requirements - Part 7. Dyeing & Finishing Machinery
FZ/T 90001 Textile machinery Packaging
FZ/T 90074 textile machinery products Painting
3 parameters
3.1 Pulp edge device parameters
Pulp edge device parameters in Table 1.
Table 1
Project Parameters
Paddle wheel material aluminum, phenolic laminate
Paddle wheel lines ruled, twill
Paddle wheel width/mm 10
3.2 Trimming Device Parameters
Trimming device parameters in Table 2.
Table 2
Project Parameters
Cutter (outside diameter × inside diameter × thickness)/mm 250 × 25 × 2,250 × 40 × 2
Trimming motor power/kW 0.37
Trimming motor poles/pole 2
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 95022-2015_English be delivered?Answer: Upon your order, we will start to translate FZ/T 95022-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 95022-2015_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 95022-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|