|
US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 95019-2021: Rotary screen end ring
Status: Valid FZ/T 95019: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 95019-2021 | English | 149 |
Add to Cart
|
3 days [Need to translate]
|
Rotary screen end ring
| Valid |
FZ/T 95019-2021
|
| FZ/T 95019-2013 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Rotary screen end ring
| Obsolete |
FZ/T 95019-2013
|
PDF similar to FZ/T 95019-2021
Basic data | Standard ID | FZ/T 95019-2021 (FZ/T95019-2021) | | Description (Translated English) | Rotary screen end ring | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W91 | | Word Count Estimation | 6,612 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | FZ/T 95019-2021: Rotary screen end ring---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rotary screen end ring
ICS 59.120.99
W91
People's Republic of China Textile Industry Standard
Replace FZ/T 95019-2013
Rotary net bulkhead
Released on 2021-04-19
2021-07-01 implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 95019-2013 "Round Net Bulkhead". Compared with FZ/T 95019-2013, the main technical changes are as follows.
---Added marking examples (see 3.1.1);
---Modified the parameters such as the nominal circumference, the outer diameter of the bayonet, the outer diameter of the nickel mesh installation and the L2 (see 3.2, 3.2 in the.2013 edition);
---Revised Figure 1 (see Figure 1, Figure 1 of the.2013 edition);
--- Modify the wall thickness parameters in Table 3 (see Table 3, Table 3 in the.2013 edition).
This standard was proposed by the China National Textile and Apparel Council.
This standard is organized by the National Textile Machinery and Accessories Standardization Technical Committee Spinning, Dyeing and Finishing Machinery Sub-Technical Committee (SAC/TC215/
SC1) Centralized.
Drafting organizations of this standard. Jiangyin Baike Nickel Mesh Co., Ltd., Wuxi Textile Machinery Quality Supervision and Inspection Center, Jiangsu Little Sun Technology Development Co., Ltd.
Exhibition Co., Ltd., Fujian Jilong Machinery Technology Co., Ltd., Xi’an Degao Printing and Dyeing Automation Engineering Co., Ltd., National Textile Machinery Quality
Supervision and Inspection Center, Fujian Meicai Technology Co., Ltd.
The main drafters of this standard. Sun Xinghuan, Li Liping, Zhang Cainan, Weng Shaohua, Ma Gongshu, Xu Jiaming.
The previous versions of the standard replaced by this standard are as follows.
---FZ/T 95019-2013.
Rotary net bulkhead
1 Scope
This standard specifies the markings and parameters, requirements, test methods, inspection rules, markings, packaging, transportation and storage of rotary screen bulkheads.
This standard applies to the bulkhead used for printing nickel nets in the textile printing and dyeing industry.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 191 Packaging, storage and transportation pictorial signs
GB/T 2828.1-2012 Sampling inspection procedures by attributes Part 1.Batch inspection sampling searched by acceptance quality limit (AQL)
plan
GB/T 15114 Aluminum alloy die casting
FZ/T 90001 Textile machinery product packaging
3 Marking and parameters
3.1 Mark
The mark is shown in Figure 1.
Nominal circumference
AL
Perimeter code
figure 1
Example. The nominal circumference of the round screen bulkhead produced by a certain company is 640mm, and the following marks are used.
640AL
3.2 Parameters
Parameters are shown in Table 1.
Table 1 Unit is mm
Project parameters
Nominal circumference 575 640 726 820 914 1018 1206 1350 1450 1500 1570
Bayonet outer circle
Diameter D1
152 173.200 230 260 293 353 398 431 437 470
Nickel mesh installation outer circle
Diameter D2
183 204 231 261 291 324 384 430 461.5 477.5 500
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 95019-2021_English be delivered?Answer: Upon your order, we will start to translate FZ/T 95019-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 95019-2021_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 95019-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 95019-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 95019-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|